I can concur that I cannot seem to mount my ext3 partition on Illumos, although I'm sure I used to be able to (a very long time ago).
I appear to have the fuse module installed in the kernel and running, even though I haven't got libfuse or fusefs installed: jadams@jadlaptop:~$ modinfo | grep -i fuse 271 fffffffff8302000 af80 298 1 fusefs (fuse driver) 271 fffffffff8302000 af80 28 1 fusefs (filesystem for fuse) root@jadlaptop:~# pkg list -af | grep -i fuse system/file-system/fuse-exfat (sfe) 0.9.2-0.151.1 --- system/file-system/fuse-ext2 (sfe) 0.0.5-0.151.1 i-- system/file-system/fusefs (sfe) 0.20100615.2-0.151.1.5 --- system/file-system/fusefs (sfe) 0.20100615.1-0.151.1.5 --- system/file-system/fusefs (sfe) 0.20100615-0.151.1 --- system/file-system/fusefs/src (sfe) 0.20100615.2-0.151.1.5 --- system/file-system/fusefs/src (sfe) 0.20100615.1-0.151.1.5 --- system/file-system/libfuse (sfe) 0.20100615-0.151.1.5 --- system/file-system/libfuse (sfe) 0.20100615-0.151.1 --- system/file-system/libfuse/src (sfe) 0.20100615-0.151.1.5 --- I don't know if this is anything to do with the proposed changes by this guy: http://openindiana.org/pipermail/oi-dev/2012-January/001095.html root@jadlaptop:~# parted -l Model: Generic Ide (ide) Disk /dev/dsk/c4t0d0p0: 80.0GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 8225kB 58.5GB 58.5GB primary solaris boot 2 58.5GB 80.0GB 21.5GB extended 5 58.5GB 79.1GB 20.6GB logical ext3 6 79.1GB 80.0GB 941MB logical linux-swap root@jadlaptop:~# fuse-ext2 /dev/rdsk/c4t0d0p5 /mnt/linux root@jadlaptop:~# ls -l /mnt/linux total 0 Jon On 27 February 2014 17:19, PÁSZTOR György <pasz...@linux.gyakg.u-szeged.hu>wrote: > Hi, > > "Michael Schuster" <michaelspriv...@gmail.com> írta 2014-02-27 18:00-kor: > > I'm not an ext2/ext3 expert, but usually /var/adm/messages or > > 'dmesg'-output should indicate something. Where there any other error > > messages that you may not have quoted in your initial email? > > There were no error message, nor other indication of fail, it just failed > silently. > Nor dmesg contains relevant info: > root@oi:~# dmesg |tail > Feb 27 13:52:09 oi pseudo: [ID 129642 kern.info] pseudo-device: sdbc0 > Feb 27 13:52:09 oi genunix: [ID 936769 kern.info] sdbc0 is /pseudo/sdbc@0 > Feb 27 13:52:09 oi pseudo: [ID 129642 kern.info] pseudo-device: ii0 > Feb 27 13:52:09 oi genunix: [ID 936769 kern.info] ii0 is /pseudo/ii@0 > Feb 27 15:01:17 oi pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) > instance 0 irq 0xe vector 0x42 ioapic 0x2 intin 0xe is bound to cpu 1 > Feb 27 15:01:17 oi pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) > instance 1 irq 0xf vector 0x42 ioapic 0x2 intin 0xf is bound to cpu 0 > Feb 27 15:32:12 oi pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) > instance 0 irq 0xe vector 0x42 ioapic 0x2 intin 0xe is bound to cpu 1 > Feb 27 15:32:12 oi pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) > instance 1 irq 0xf vector 0x42 ioapic 0x2 intin 0xf is bound to cpu 0 > Feb 27 15:32:13 oi pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) > instance 0 irq 0xe vector 0x42 ioapic 0x2 intin 0xe is bound to cpu 1 > Feb 27 15:32:13 oi pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) > instance 1 irq 0xf vector 0x42 ioapic 0x2 intin 0xf is bound to cpu 0 > > Neither truss: > root@oi:~# LD_LIBRARY_PATH=/usr/gnu/lib truss fuse-ext2 /dev/lofi/1 > /mnt/e2t/ > execve("/usr/bin/fuse-ext2", 0x08047E0C, 0x08047E1C) argc = 3 > sysinfo(SI_MACHINE, "i86pc", 257) = 6 > mmap(0x00000000, 32, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, > -1, 0) = 0xFEFB0000 > mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, > MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEFA0000 > sysconfig(_CONFIG_PAGESIZE) = 4096 > mmap(0x00000000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0) > = 0xFEF90000 > mmap(0x00000000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0) > = 0xFEF80000 > memcntl(0xFEFB7000, 32140, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 > memcntl(0x08050000, 24156, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 > resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12 > resolvepath("/usr/bin/fuse-ext2", "/usr/bin/fuse-ext2", 1023) = 18 > stat64("/usr/bin/fuse-ext2", 0x08047A50) = 0 > open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT > stat64("/usr/gnu/lib/libc.so.1", 0x08047200) Err#2 ENOENT > stat64("/lib/libc.so.1", 0x08047200) = 0 > resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14 > open("/lib/libc.so.1", O_RDONLY) = 3 > mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, > MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEF70000 > mmapobj(3, MMOBJ_INTERPRET, 0xFEF70018, 0x0804726C, 0x00000000) = 0 > close(3) = 0 > memcntl(0xFEE30000, 179708, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 > mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, > MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE20000 > getcontext(0x080478B0) > getrlimit(RLIMIT_STACK, 0x080478A8) = 0 > getpid() = 1818 [1817] > lwp_private(0, 1, 0xFEE22A40) = 0x000001C3 > setustack(0xFEE22AA0) > sysi86(SI86FPSTART, 0xFEF69C2C, 0x0000133F, 0x00001F80) = 0x00000001 > brk(0x0807A3B8) = 0 > brk(0x0807C3B8) = 0 > stat64("/dev/lofi/1", 0x08047D30) = 0 > brk(0x0807C3B8) = 0 > brk(0x0807E3B8) = 0 > open("/dev/lofi/1", O_RDWR) = 3 > fstat64(3, 0x08047A70) = 0 > brk(0x0807E3B8) = 0 > brk(0x080803B8) = 0 > llseek(3, 1024, SEEK_SET) = 1024 > read(3, " X d\0\0\09001\0\014\0\0".., 1024) = 1024 > close(3) = 0 > stat64("/usr/gnu/lib/libfuse.so", 0x08047288) = 0 > resolvepath("/usr/gnu/lib/libfuse.so", "/usr/gnu/lib/libfuse.so.2.7.1", > 1023) = 29 > open("/usr/gnu/lib/libfuse.so", O_RDONLY) = 3 > mmapobj(3, MMOBJ_INTERPRET, 0xFEF70C38, 0x080472F4, 0x00000000) = 0 > close(3) = 0 > mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, > MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEDD0000 > memcntl(0xFEDE0000, 43104, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 > stat64("/usr/gnu/lib/libxnet.so.1", 0x080471C8) Err#2 ENOENT > stat64("/lib/libxnet.so.1", 0x080471C8) = 0 > resolvepath("/lib/libxnet.so.1", "/lib/libxnet.so.1", 1023) = 17 > open("/lib/libxnet.so.1", O_RDONLY) = 3 > mmapobj(3, MMOBJ_INTERPRET, 0xFEDD0578, 0x08047234, 0x00000000) = 0 > close(3) = 0 > mprotect(0xFEDE0000, 128915, PROT_READ|PROT_WRITE|PROT_EXEC) = 0 > stat64("/usr/gnu/lib/libsocket.so.1", 0x08046DD8) Err#2 ENOENT > stat64("/lib/libsocket.so.1", 0x08046DD8) = 0 > resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19 > open("/lib/libsocket.so.1", O_RDONLY) = 3 > mmapobj(3, MMOBJ_INTERPRET, 0xFEDD0B38, 0x08046E44, 0x00000000) = 0 > close(3) = 0 > mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, > MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEDB0000 > memcntl(0xFE7C0000, 16664, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 > stat64("/usr/gnu/lib/libnsl.so.1", 0x08046948) Err#2 ENOENT > stat64("/lib/libnsl.so.1", 0x08046948) = 0 > resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16 > open("/lib/libnsl.so.1", O_RDONLY) = 3 > mmapobj(3, MMOBJ_INTERPRET, 0xFEDB0798, 0x080469B4, 0x00000000) = 0 > close(3) = 0 > memcntl(0xFEAE0000, 78432, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0 > mprotect(0xFEDE0000, 128915, PROT_READ|PROT_EXEC) = 0 > sigfillset(0xFEF690E8) = 0 > _exit(-4) > > (Now, dmesg contains the same as before.) > > Regards, > György > > _______________________________________________ > OpenIndiana-discuss mailing list > OpenIndiana-discuss@openindiana.org > http://openindiana.org/mailman/listinfo/openindiana-discuss > _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss