I'm not working on virtual environements. Here is the complete log of the failed boot: http://pastebin.com/MRE1VQ70
and here a successfull boot: http://pastebin.com/KCxiaJRe Has anybody a idea why it stops after pool0 pseudo device? On failing it shows in 'last' always an immediate system down, but it remains pingable until reset is performed: reboot system down Sun Jul 27 10:33 reboot system boot Sun Jul 27 10:32 Many Thanks Carsten Am 25.07.14 schrieb "Heiko L." <[email protected]>: > > I have a boot problem on a SuperMicro MB X10SLM-F with oi_151a9. > > If I powerof the system with 'init 5' and then poweron again via the Power > > Button the boot hangs or stops anywhere. > > A boot with -v shows last line: > > > > pseudo-device: pool0 > > pool0 is /pseudo/pool@0 > > > > If I reset then via Button or Smash 'reset system1/pwrmgtsvc1' than the > > system boots without any problems. The next line after > > pool0 is than > > > > pseudo-device: fssnap0 > > fssnap0 is /pseudo/fssnap@0 > > > > Interesting is also last shows an immediate 'system down' after 'system > > boot' which is definitly earlier then I reset the > > system: > > > > reboot system down Thu Jul 24 08:00 > > reboot system boot Thu Jul 24 07:59 > > > > Has anybody an idea what is cause this behavior? > > _______________________________________________ > > possible different clocks > > 1. compare hwclock osclock/ntp TZ (read below) > 2. compare dmesg with syslog (post more lines) > 3. try: "halt", waitanyminutes, than boot > 4. check disk badblocks > > > > regards Heiko > > > If you system make a timejump read this memo: > ----------- > 120703.prob.sol.xvm.clock > > $ date > Tuesday, July 3, 2012 05:15:11 AM CEST > $ ntpq -p > remote refid st t when poll reach delay offset jitter > ============================================================================== > sirius 130.133.1.10 2 u 39 64 7 0.385 7201857 1313.35 > leo 193.174.73.85 3 u 36 64 7 0.288 7201859 1315.05 > $ rtc > Europe/Berlin > # date > Tuesday, July 3, 2012 05:45:53 AM CEST > # date 07030745 > Tuesday, July 3, 2012 07:45:00 AM CEST > # date > Tuesday, July 3, 2012 05:45:01 AM CEST > > -> timejump... > > - cfg: > $ grep ^zone /etc/rtc_config > zone_info=Europe/Berlin > zone_lag=-3600 > > - The solution: > Dom0's real time (hardware) clock has to be set to UTC! [1] > > ## script fix TZ > yourtimeserver="changeit" > rtc > f=/etc/rtc_config > cp -p $f $f.old > rtc -z UTC > svcadm disable ntp; ntpdate $yourtimeserver; sleep 3;svcadm enable ntp;sleep 3 > ntpq -p > > > ================================================================= > [1] http://southbrain.com/south/2009/09/rtc-sun-xvm-wrong-timezone-off.html > rtc! Sun xVM: Wrong timezone offset in PV DomU? > Dom0's real time (hardware) clock has to be set to UTC! > > [2] http://www.mail-archive.com/[email protected]/msg03175.html > Re: [xen-discuss] Is OpenSolaris dom0 passing local time as UTC to Linux > domU's? > > > > > _______________________________________________ > openindiana-discuss mailing list > [email protected] > http://openindiana.org/mailman/listinfo/openindiana-discuss > > _______________________________________________ openindiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
