Haven't used send/recv to speak of but experimenting today I wonder if there is some tricky way to set mountpoint of the recvd filesystem in some better way that what I've been getting:
Here I see seems sort of wrong: (First let me establish some basics) ,---- | On recv host: | | zfs list -r p0: | | NAME USED AVAIL REFER MOUNTPOINT | p0 412K 386G 24K /p0 | p0/git 24K 386G 24K /usr/local/src/git | p0/spool 24K 386G 24K /spool `---- Now running send / recv zfs send p0/projects@201017|ssh RH zfs recv p0/projects OK .. no errors ,---- | So, looking on recv host again: | | p0 98.3M 385G 24K /p0 | p0/git 24K 385G 24K /usr/local/src/git | p0/projects 97.9M 385G 97.9M /p0/projects | p0/spool 24K 385G 24K /spool `---- Notice the mountpoint is /p0/projects So now I have to login to recv host and set mountpoint to what I want. So it seems then that unless there is a better way I might as well had logged in on recv host ran: zfs create -o mountpoint=/projects p0/projects then rsynced the data into it. Seems like the mount of work and time would be about the same (unless since my data sample is small, I'm seeing a skewed test in the event rsync is much slower than send recv) Hopefully some of you will see my errors and clear this up for me. _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
