In message <d10094d6-3896-ae0c-b05f-9739ea1ef...@willows7.myzen.co.uk>, russell writes: >While usb devices are being being detected, I am unable to access the >usb devices. > >Apr 25 16:22:29 tesla usba: [ID 912658 kern.info] USB 2.0 device >(usb781,5567) operating at hi speed (USB 2.x) on USB 2.0 external hub: >storage@3, scsa2usb1 at bus address 7 >Apr 25 16:22:29 tesla usba: [ID 349649 kern.info] SanDisk Cruzer Blade >4C530000140730116282 >Apr 25 16:22:29 tesla genunix: [ID 936769 kern.info] scsa2usb1 is >/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@3 >Apr 25 16:22:29 tesla genunix: [ID 408114 kern.info] >/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@3 (scsa2usb1) online >Apr 25 16:22:29 tesla scsi: [ID 583861 kern.info] sd11 at scsa2usb1: >target 0 lun 0 >Apr 25 16:22:29 tesla genunix: [ID 936769 kern.info] sd11 is >/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@3/disk@0,0 >Apr 25 16:22:29 tesla genunix: [ID 408114 kern.info] >/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@3/disk@0,0 (sd11) >online
Does it show up with format(1M) -e? I think it will because sd(7D) has attached. >Also when I try and access them from VirtualBox, the devices are recognised > >Apr 25 16:41:11 tesla vboxusbmon: [ID 695880 kern.notice] Capturing USB >Flash Disk >0x90c:0x1000:/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage >Bus=7 Port=3 > >However when I attempt to mount the USB drives the VM reports the following # cfgadm -lv| grep -A1 SanDisk My WAG is that USB passthru requires the device not to be configured by the host. John groenv...@acm.org _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss