That's what it should do but the messages in the install program are quite confusing.
It will actually let you do anything you want, but it is not easy to sort out how. In 34 years of doing admin work I have *never* had to spend more than a few hours to get a working system. The failure to reconfigure on the first boot took me 50 hours of effort to diagnose. And I really only succeeded because I did not give up. I normally take several days sorting out exactly how I want a new system configured, but that is rather different from it not booting when it obviously should. Reg On Saturday, May 1, 2021, 11:38:04 AM CDT, Michelle <miche...@msknight.com> wrote: I just followed the text install on the 2021.04 GUi live image, and it created a single Rpool for the whole disk. I'm not sure where I'm going to go from here. Need to have a sit and think. Thank you very much for all your efforts on this. I really do appreciate it. Michelle. On Sat, 2021-05-01 at 16:23 +0000, Reginald Beardsley via openindiana- discuss wrote: > I just installed the 2021.04.30 text ISO on my Z400 test system. The > disk had a pool in a single slice which I imported and destroyed. Had > I not done that it would have named the pool rpool1. I left the disk > label alone. This was from testing manually creating a single slice > and installing into that using the F5 option which doesn't create > dump and swap on the expectation they already exist. > > The installer still has the usual spurious messages about only using > 2 TB. I selected an EFI label and did the install. > > That created a 256 MB s0 slice beginning in sector 256 with the rest > of the disk in s1. > > "zfs list" shows the pool has 4.39 TB available which is correct for > having used the entire disk. > > If you're going to run a 2 disk mirror with the 6 TB drives I'd > install to a single pool using the text installer. Assuming it works > properly. When the 8 TB drive returns, copy the data and then create > a matching label and add the drive to the pool to create a mirror. > > Unfortunately we are a tad shy on current documentation. > > Reg > > On Saturday, May 1, 2021, 10:15:53 AM CDT, Michelle < > miche...@msknight.com> wrote: > > Actually, I was wrong. It was the 2021.04 text install USB that I > was > using. I was using the text install because it's just a file server. > I > don't need X. > > Well, the situation I find myself in is as follows... > > A pair of 6tb reds, one of which has data on that I can't get off > until > one of my 8tb has come back from RMA.... > > So I thought I'd use the other 6tb to get this sorted, and by the > time > the other 6tb is ready to be put in, I would be able to install it > and > add it in. > > Going via the GUI installer, I'm wondering whether I'll be able to do > that. > > This is why I was following your script, but when it came to step 4, > the solaris partition was only 2tb max. However, I've just noted that > I > wasn't using the -e at the end of the format command, so after I've > made dinner I'll read up on that switch in the hope that this is what > will enable me to create the larger Solaris partition. > > Michelle. > > > On Sat, 2021-05-01 at 14:04 +0000, Reginald Beardsley via > openindiana- > discuss wrote: > > Michelle, > > > > What disks are you trying to use? If they are different sizes the > > recipe gets a bit more complex, but it's quite possible to get any > > arrangement for which you have a sufficient number of disks. Having > > spent 50 hours over 5 days battling the 2021.04.05 install I've had > > *lots* of practice installing both 2021.04.05 and 2020.10. > > > > Incidentally the failure of 2021.04.05 to run the nVIDIA driver is > > because it installed the wrong driver for that system. > > > > Reg > > > > > > > > > > On Saturday, May 1, 2021, 08:16:07 AM CDT, Michelle < > > miche...@msknight.com> wrote: > > > > > > OK - I give in. > > > > I've tried various combinations and I just can't get this into a > > configuration where I can get things installed. > > > > I need a step by step guide please, because I'm lost. I don't know > > what > > options to choose in the installer to not avoid it wanting to wipe > > whatever combinations of partitions I've set. > > > > Michelle. > > > > > > > > _______________________________________________ > > openindiana-discuss mailing list > > openindiana-discuss@openindiana.org > > https://openindiana.org/mailman/listinfo/openindiana-discuss > > _______________________________________________ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss > > _______________________________________________ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss