On 8/6/21 12:59 PM, Michelle wrote: > Ah, if you're moving a live rpool, that's a bit more complex. > > I'd have destroyed the mirror, moved the drive and then re-mirrored... > but only if I'd put another boot on the other drive. > > After all, if you've mirrored your rpool, but there's no boot on the > mirror drive, then it will still not boot the mirror drive. > > > > On Fri, 2021-08-06 at 12:54 +0200, Stephan Althaus wrote: >> On 8/6/21 12:47 PM, Michelle wrote: >>> Did you export the zpool before moving the drives and then import >>> again >>> after? >>> >>> If I don't export before I move things, then I wouldn't expect ZFS >>> to >>> be able to track it automatically. >>> >>> >>> >>> On Fri, 2021-08-06 at 11:19 +0200, Stephan Althaus wrote: >>>> Hello! >>>> >>>> i just added a new disk to my system, which i put into the slot >>>> where >>>> a >>>> mirror disk of my rpool resided. >>>> >>>> The mirror disk of my rpool went to a other slot, so the device >>>> name >>>> was >>>> changed c27t1d0 -> c27t0d0 >>>> >>>> Booting into my OI system, the zpool was found as the first >>>> mirror >>>> disk >>>> was there, >>>> but the second partition was not found. >>>> >>>> >>>> Is there a chance that the rpool mount procedure could try harder >>>> to >>>> find the mirrors, even when moved ?? >>>> >>>> >>>> Yes i know this may be a rare case :-/ >>>> >>>> >>>> Greetings, >>>> >>>> Stephan >>>> >>>> >>>> _______________________________________________ >>>> openindiana-discuss mailing list >>>> [email protected] >>>> https://openindiana.org/mailman/listinfo/openindiana-discuss >>> _______________________________________________ >>> openindiana-discuss mailing list >>> [email protected] >>> https://openindiana.org/mailman/listinfo/openindiana-discuss >> Hi! >> >> This is my root pool, is it exported on shutdown? i would think so.. >> >> I think, if i move the mirror drive to a different slot and leave the >> origin-slot empty, it could work.. >> >> I should have imported and exported the pool with a illumos-live- >> USB, >> _before_ trying to boot the installed system with the change. >> >> i had no live-medium at hand so i just gave it a try.. >> >> Stephan >> >> BTW, the mirrored pool is up and working: >> >> $ zpool status rpool >> pool: rpool >> state: ONLINE >> scan: resilvered 194G in 0 days 00:50:39 with 0 errors on Fri Aug >> 6 >> 12:04:20 2021 >> config: >> >> NAME STATE READ WRITE CKSUM >> rpool ONLINE 0 0 0 >> mirror-0 ONLINE 0 0 0 >> c9t002538B471B9EFD3d0s8 ONLINE 0 0 0 >> c27t0d0s0 ONLINE 0 0 0 >> >> >> >> _______________________________________________ >> openindiana-discuss mailing list >> [email protected] >> https://openindiana.org/mailman/listinfo/openindiana-discuss > > _______________________________________________ > openindiana-discuss mailing list > [email protected] > https://openindiana.org/mailman/listinfo/openindiana-discuss
Yes, Michelle, you're right. The intention of my thread was to enhance the automagically discovered changes. There have been efforts to re-import pools that have been im- and exported on linux and changed the device names. My case is just another one that (maybe) could be handled automagically, without user intervention. ... Stephan _______________________________________________ openindiana-discuss mailing list [email protected] https://openindiana.org/mailman/listinfo/openindiana-discuss
