> On 2. Jan 2023, at 18:11, Marc Lobelle <marc.lobe...@uclouvain.be> wrote: > > Hi Toomas, > > Format says this What should I change ? > > Total disk size is 58369 cylinders > Cylinder size is 16065 (512 byte) blocks > > Cylinders > Partition Status Type Start End Length % > ===== ==== == ==== ==== ==== === > 1 EFI 0 58368 58369 100 >
this one is all good. What does format -> verify report? rgds, toomas > > On 1/2/23 12:49, Toomas Soome via openindiana-discuss wrote: >> Since you are using MBR+VTOC, make sure your new disk has Solaris2 partition >> (100%). You can check by running format, select the disk, then enter ‘fdisk'. >> >> rgds, >> toomas >> >>> On 2. Jan 2023, at 13:45, Marc Lobelle <marc.lobe...@uclouvain.be> wrote: >>> >>> Hello, >>> >>> First, Best wished for 2023 to everybody ! >>> >>> I tried to add a second 480Gb disk to my rpool (different manufacturer and >>> slightly larger) >>> >>> Below is what I did, but apparently there is a problem and the case (adding >>> a mirror disk) is not discussed in https://illumos.org/msg/ZFS-8000-4J/ >>> >>> Anybody has an idea on how to solve this issue ? I did not yet installgrub >>> on the new disk because I fear it would make things worse. >>> >>> Thanks >>> >>> Marc >>> >>> ml@spitfire:/home/ml# zpool status rpool >>> pool: rpool >>> state: ONLINE >>> scan: scrub repaired 0 in 0 days 00:05:41 with 0 errors on Wed Dec 28 >>> 16:43:12 2022 >>> config: >>> >>> NAME STATE READ WRITE CKSUM >>> rpool ONLINE 0 0 0 >>> c7d0s0 ONLINE 0 0 0 >>> >>> errors: No known data errors >>> ml@spitfire:/home/ml# format >>> Searching for disks...done >>> >>> >>> AVAILABLE DISK SELECTIONS: >>> 0. c5d0 <Samsung SSD 870 QVO >>> 4TB=S5STNF0T406608A-S5STNF0T406608A-0001-3.64TB> >>> /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0 >>> 1. c6d0 <Samsung SSD 870 QVO >>> 4TB=S5STNF0T406604J-S5STNF0T406604J-0001-3.64TB> >>> /pci@0,0/pci-ide@1f,2/ide@1/cmdk@0,0 >>> 2. c7d0 <Unknown-Unknown-0001 cyl 58366 alt 2 hd 255 sec 63> >>> /pci@0,0/pci-ide@1f,5/ide@0/cmdk@0,0 >>> 3. c8d0 <Unknown-Unknown-0001 cyl 58367 alt 2 hd 255 sec 63> >>> /pci@0,0/pci-ide@1f,5/ide@1/cmdk@0,0 >>> Specify disk (enter its number): ^C >>> ml@spitfire:/home/ml# prtvtoc /dev/rdsk/c7d0s0 >>> * /dev/rdsk/c7d0s0 partition map >>> * >>> * Dimensions: >>> * 512 bytes/sector >>> * 63 sectors/track >>> * 255 tracks/cylinder >>> * 16065 sectors/cylinder >>> * 58368 cylinders >>> * 58366 accessible cylinders >>> * 937681920 sectors >>> * 937649790 accessible sectors >>> * >>> * Flags: >>> * 1: unmountable >>> * 10: read-only >>> * >>> * Unallocated space: >>> * First Sector Last >>> * Sector Count Sector >>> * 0 16065 16064 >>> * >>> * First Sector Last >>> * Partition Tag Flags Sector Count Sector Mount Directory >>> 0 2 00 16065 937633725 937649789 >>> 2 5 01 0 937649790 937649789 >>> 8 1 01 0 16065 16064 >>> ml@spitfire:/home/ml# prtvtoc /dev/rdsk/c7d0s0|fmthard -s - /dev/rdsk/c8d0s0 >>> fmthard: Partition 2 specifies the full disk and is not equal >>> full size of disk. The full disk capacity is 937665855 sectors. >>> fmthard: New volume table of contents now in place. >>> ml@spitfire:/home/ml# zpool attach -f rpool c7d0s0 c8d0s0 >>> Make sure to wait until resilver is done before rebooting. >>> ml@spitfire:/home/ml# zpool status rpool >>> pool: rpool >>> state: ONLINE >>> status: One or more devices is currently being resilvered. The pool will >>> continue to function, possibly in a degraded state. >>> action: Wait for the resilver to complete. >>> scan: resilver in progress since Mon Jan 2 11:59:05 2023 >>> 56,4G scanned at 2,56G/s, 909M issued at 41,3M/s, 56,4G total >>> 910M resilvered, 1,57% done, 0 days 00:22:55 to go >>> config: >>> >>> NAME STATE READ WRITE CKSUM >>> rpool ONLINE 0 0 0 >>> mirror-0 ONLINE 0 0 0 >>> c7d0s0 ONLINE 0 0 0 >>> c8d0s0 ONLINE 0 0 0 (resilvering) >>> >>> errors: No known data errors >>> ml@spitfire:/home/ml# zpool status rpool >>> pool: rpool >>> state: DEGRADED >>> status: One or more devices could not be used because the label is missing >>> or >>> invalid. Sufficient replicas exist for the pool to continue >>> functioning in a degraded state. >>> action: Replace the device using 'zpool replace'. >>> see: http://illumos.org/msg/ZFS-8000-4J >>> scan: resilvered 34,6G in 0 days 00:06:23 with 0 errors on Mon Jan 2 >>> 12:05:28 2023 >>> config: >>> >>> NAME STATE READ WRITE CKSUM >>> rpool DEGRADED 0 0 0 >>> mirror-0 DEGRADED 0 0 0 >>> c7d0s0 ONLINE 0 0 0 >>> c8d0s0 UNAVAIL 0 57,4K 0 corrupted data >>> >>> errors: No known data errors >>> ml@spitfire:/home/ml# >>> >>> >>> _______________________________________________ >>> openindiana-discuss mailing list >>> openindiana-discuss@openindiana.org >>> https://openindiana.org/mailman/listinfo/openindiana-discuss >> >> _______________________________________________ >> openindiana-discuss mailing list >> openindiana-discuss@openindiana.org >> https://openindiana.org/mailman/listinfo/openindiana-discuss > > _______________________________________________ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss