On Sunday 11 March 2007 20:44, Douglas B. Jones wrote: > If there is anymore gdb commands I can do, please > let me know. Thanks! This might help: http://www.openldap.org/faq/index.cgi?_highlightWords=backtrace&file=59
> -----Original Message----- > From: Douglas B. Jones [mailto:[EMAIL PROTECTED] > Sent: Friday, March 09, 2007 3:15 PM > To: Howard Chu > Cc: [email protected]; Aaron Richton; Douglas B Jones > Subject: RE: slapd stopping with no error message > > > > Thanks, I did not think about them being stripped! I reran it with: > > > > and got: > %gdb ./servers/slapd/slapd > (gdb)r -d 1 -u ldap3 -g ldap3 -h ldap://:389/ -l local6 -F \ > /usr/local/openldap-2.3.34/etc/openldap > ( output skipped) > > >>> dnPrettyNormal: <> > > <<< dnPrettyNormal: <>, <> > do_bind: version=3 dn="" method=128 > send_ldap_result: conn=0 op=0 p=3 > send_ldap_response: msgid=1 tag=97 err=0 > ber_flush: 14 bytes to sd 34 > do_bind: v3 anonymous bind > connection_get(34): got connid=0 > connection_read(34): checking for input on id=0 > ber_get_next > > Program received signal SIGSEGV, Segmentation fault. > [Switching to Thread 635632560 (LWP 14158)] > ber_get_next (sb=0x25efbfe8, len=0x25e2c27c, ber=0x2452cfd4) at io.c:551 > 551 if (*ber->ber_ptr & 0x80) { /* multi-byte */ > (gdb) where > #0 ber_get_next (sb=0x25efbfe8, len=0x25e2c27c, ber=0x2452cfd4) at > io.c:551 #1 0x0805eed0 in connection_read (s=34) at connection.c:1528 > #2 0x0805baa2 in slapd_daemon_task (ptr=0x0) at daemon.c:2461 > #3 0x004e5371 in start_thread () from /lib/tls/libpthread.so.0 > #4 0x0036effe in clone () from /lib/tls/libc.so.6 > > If I can provide any more information, please let me know. Thanks! > Thanks again for all the help! > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf > Of Howard Chu > Sent: Friday, March 09, 2007 3:05 PM > To: Douglas B. Jones > Cc: [email protected]; Aaron Richton > Subject: Re: slapd stopping with no error message > > Douglas B. Jones wrote: > > Thank you for the help, I thought that might be the case. I re-compiled > > slapd (and all) with -g (I put those in the CFLAGS and exported it). I > > then ran gdb with: > > > > gdb \ > > -d /var/lib/ldap3/src/openldap-2.3.34/servers/slapd \ > > -d /var/lib/ldap3/src/openldap-2.3.34/servers/slapd/back-bdd \ > > -d /var/lib/ldap3/src/openldap-2.3.34/libraries/liblber \ > > -d /var/lib/ldap3/src/openldap-2.3.34/libraries/libldap \ > > -d /var/lib/ldap3/src/openldap-2.3.34/libraries/libldap_r\ > > -d /var/lib/ldap3/src/openldap-2.3.34/libraries/libunicode\ > > -d /var/lib/ldap3/src/openldap-2.3.34/libraries/libutil\ > > -d /var/lib/ldap3/src/openldap-2.3.34/libraries/librewrite\ > > None of those options are necessary. > > > /usr/local/openldap-2.3.34/libexec/slapd > > By default the installed executables are stripped. You could just debug > the original binary in the build tree. (Or you can redo the install in > the slapd directory with "make install STRIP=" ) > > > and run it with: > > > > (gdb) r -d 1 -u ldap3 -h ldap://:389/ -l LOCAL6 -f \ > > /usr/local/openldap-2.3.34/etc/openldap/slapd.conf -F \ > > /usr/local/openldap-2.3.34/etc/openldap -u ldap3 -g ldap3 > > Have you read the slapd(8) manpage? Why are you providing both -f and > -F? You have -u twice. > > > and when in the debugger it crashes on the first search and I type > > in where in gdb: > > > > (first part here last of output from -d 1 for slapd) > > > >>>> dnNormalize: <> > > > > <<< dnNormalize: <> > > > >>>> dnNormalize: <> > > > > <<< dnNormalize: <> > > <= str2entry(cn=Write,cn=Waiters,cn=Monitor) -> 0x25eaafd8 > > backend_startup_one: starting "o=gpc,c=us" > > slapd starting > > [New Thread 634641328 (LWP 14073)] > > [New Thread 630442928 (LWP 14074)] > > [New Thread 626244528 (LWP 14075)] > > [New Thread 622046128 (LWP 14076)] > > > >>>> slap_listener(ldap://:389/) > > > > connection_get(34): got connid=0 > > connection_read(34): checking for input on id=0 > > ber_get_next > > ber_get_next: tag 0x30 len 12 contents: > > ber_get_next > > do_bind > > ber_scanf fmt ({imt) ber: > > > > ber_scanf fmt (m}) ber: > >>>> dnPrettyNormal: <> > > > > <<< dnPrettyNormal: <>, <> > > do_bind: version=3 dn="" method=128 > > send_ldap_result: conn=0 op=0 p=3 > > send_ldap_response: msgid=1 tag=97 err=0 > > ber_flush: 14 bytes to sd 34 > > connection_get(34): got connid=0 > > connection_read(34): checking for input on id=0 > > ber_get_next > > > > Program received signal SIGSEGV, Segmentation fault. > > [Switching to Thread 634641328 (LWP 14073)] > > 0x0814c6bf in ?? () > > (gdb) where > > #0 0x0814c6bf in ?? () > > #1 0x00000001 in ?? () > > #2 0x0000002c in ?? () > > #3 0x25f1cfe7 in ?? () > > #4 0x25f1cfdc in ?? () > > #5 0x25f18f4c in ?? () > > #6 0x25d410e0 in ?? () > > #7 0x25d3a268 in ?? () > > #8 0x00000000 in ?? () > > (gdb) > > > > Unfortunately, I am not getting any reference to the C source files. > > What am I do wrong? Eventually, hopefully, I will know linux better. > > Thanks for any help.... > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf > > Of Aaron Richton > > Sent: Friday, March 09, 2007 12:37 PM > > To: Douglas B. Jones > > Cc: Howard Chu; [email protected] > > Subject: RE: slapd stopping with no error message > > > > > > Try "where". Make sure that you have line numbers from the -g compile > > (e.g. "init.c:354"); otherwise the trace is near impossible to use. > > > > On Fri, 9 Mar 2007, Douglas B. Jones wrote: > >> I apologize, but I am not familiar with gdb. I attached to the process, > >> it crashed with a seg fault. What should I be typing in now? Thanks! > >> > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] Behalf > >> Of Douglas B. Jones > >> Sent: Friday, March 09, 2007 8:34 AM > >> To: Howard Chu > >> Cc: Douglas B Jones; [email protected] > >> Subject: RE: slapd stopping with no error message > >> > >> > >> > >> Thanks. I am compiling with efence library right now. I am not too > >> worried about the speed, it is not prod. I would like to run it under > >> gdb, and I will try that, the problem is that if I loose my connection > >> the only thing I can think of is to kill the other gdb, then re-attach. > >> I guess that would not cause a problem. I was hoping with the cd and > >> ulimit that the core would be generated and then gdb on that. Thanks! > >> > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] Behalf > >> Of Howard Chu > >> Sent: Friday, March 09, 2007 12:55 AM > >> To: Douglas B. Jones > >> Cc: [email protected] > >> Subject: Re: slapd stopping with no error message > >> > >> Douglas B. Jones wrote: > >>> The .34 failed. I set ulimit -c 100000 and found no core on the system. > >>> I am running it again in case I made a mistake. It is compiled with > >>> debug. More later. Thanks! > >> > >> Still better to run under gdb. But given the fact that you're getting > >> heap corruption, you're really going to need something like efence in > >> addition. Unfortunately that's going to make things run very slowly, but > >> that's the only sure way to identify the root cause of the problem. > >> > >>> -----Original Message----- > >>> From: [EMAIL PROTECTED] > >>> [mailto:[EMAIL PROTECTED] On > >>> Behalf Of Douglas B. Jones > >>> Sent: Friday, February 23, 2007 3:30 PM > >>> To: [email protected] > >>> Cc: Douglas B. Jones > >>> Subject: RE: slapd stopping with no error message > >>> > >>> > >>> I attached a gdb to the new process plus the -d 7 output (you know, > >>> that neat thing that unix has called redirection). Hopefully, the > >>> connection I have to the computer will not be lost and I will be > >>> able to get the trace if it fails. Also, not the results below are > >>> just the last part of the output. Let me know if I need more. For > >>> what it is worth, I did the 'he' search shown at the bottom below > >>> and it did not fail.... Thanks! > >>> > >>> -----Original Message----- > >>> From: [EMAIL PROTECTED] > >>> [mailto:[EMAIL PROTECTED] > >>> Behalf Of Douglas B. Jones > >>> Sent: Friday, February 23, 2007 2:22 PM > >>> To: [email protected] > >>> Cc: [EMAIL PROTECTED] > >>> Subject: RE: slapd stopping with no error message > >>> > >>> > >>> > >>> Finally failed, I did not have a gdb on it, but did have -d 7. Below > >>> are the results. Thanks! > >>> > >>> do_search > >>> ldap_read: want=8 error=Resource temporarily unavailable > >>> > >>> ber_scanf fmt ({miiiib) ber: > >>>>>> dnPrettyNormal: <o=gpc,c=us> > >>> > >>> => ldap_bv2dn(o=gpc,c=us,0) > >>> <= ldap_bv2dn(o=gpc,c=us)=0 > >>> => ldap_dn2bv(272) > >>> <= ldap_dn2bv(o=gpc,c=us)=0 > >>> => ldap_dn2bv(272) > >>> <= ldap_dn2bv(o=gpc,c=us)=0 > >>> <<< dnPrettyNormal: <o=gpc,c=us>, <o=gpc,c=us> > >>> SRCH "o=gpc,c=us" 2 0 100 3600 0 > >>> ber_scanf fmt ({m) ber: > >>> ber_scanf fmt (m) ber: > >>> ber_scanf fmt ({m) ber: > >>> ber_scanf fmt (m) ber: > >>> ber_scanf fmt ({m) ber: > >>> ber_scanf fmt (m) ber: > >>> filter: (|(cn=he*)(mail=he*)(sn=he*)) > >>> ber_scanf fmt ({M}}) ber: > >>> attrs: cn mail > >>> *** glibc detected *** corrupted double-linked list: 0x29400048 *** > >>> /etc/init.d/gpcldap-33: line 51: 11051 Aborted ${slapd} > >>> -d 7 -u $user -h "ldap://:$P/" $OPTIONS $SLAPD_OPTIONS > >> > >> -- > >> -- Howard Chu > >> Chief Architect, Symas Corp. http://www.symas.com > >> Director, Highland Sun http://highlandsun.com/hyc > >> Chief Architect, OpenLDAP http://www.openldap.org/project/ -- Ralf Haferkamp SUSE LINUX Products GmbH, Maxfeldstrasse 5, D-90409 Nuernberg T: +49-911-74053-0 F: +49-911-74053575 - [EMAIL PROTECTED]
