you might check Wirecast: http://www.telestream.net/wire-cast/overview.htm
Sebastian 2010/7/22 Richard Yo <wei.kar...@gmail.com> > Thanks for you time! > > However, being a serious and emergent issue, the FPS issue seems like a > must-be-done task to our team's goal-- > So we're working on some alternatives; > meanwhile, would you suggest any solutions or recommend other methods? > Like looking for other codec and replace the original? > > We'd consider hiring anyone-who-can-help a option. > Thanks again. > > Richard > > 2010/7/22 Sebastian Wagner <seba.wag...@gmail.com> > >> Hi Richard, >> >> that is almost impossible, you have to change the FPS rate in the screen >> sharing client to 50 ms. The bandwidth needed to transfer for example >> 1240x1024 pixels screen at 24fps ... you can calculate that the Bitrate >> (even with a screen codec that just sends the frames that have changed) is >> that huge that it will be impossible. >> >> Sebastian >> >> 2010/7/22 Richard Yo <wei.kar...@gmail.com> >> >>> Thanks a lot! >>> On the other hand, is it possible to have a recorded file of frame rates >>> about 20 frame/sec? >>> >>> Richard >>> >>> 2010/7/22 Sebastian Wagner <seba.wag...@gmail.com> >>> >>>> Hallo Richard, >>>> >>>> you can also try the latest nightly build, there is an option in the >>>> Quality settings "Very high". >>>> You could also integrate an even higher quality, but of course at some >>>> point that will affect the bandwidth needs. >>>> >>>> The RTP Sharer has no "record" modus. >>>> >>>> Sebastian >>>> >>>> 2010/7/22 Richard Yo <wei.kar...@gmail.com> >>>> >>>>> Dear all, >>>>> >>>>> We need a better performance of the recorded files, so I choose RTP >>>>> at first. >>>>> But while I'm trying to record to screen by screencast_rtp, it >>>>> didn't perfectly work. >>>>> The gui showed "streaming" but I can't find any recorded file on the >>>>> server. >>>>> What should I do? >>>>> >>>>> I tried the Screenshare (standard) by RTMP but the frame rate did >>>>> not satisfy our need. >>>>> >>>>> Any idea or advice? Thanks a lot! >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "OpenMeetings User" group. >>>>> To post to this group, send email to >>>>> openmeetings-u...@googlegroups.com. >>>>> To unsubscribe from this group, send email to >>>>> openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> >>>>> . >>>>> For more options, visit this group at >>>>> http://groups.google.com/group/openmeetings-user?hl=en. >>>>> >>>>> >>>> >>>> >>>> -- >>>> Sebastian Wagner >>>> http://www.webbase-design.de >>>> http://openmeetings.googlecode.com >>>> http://www.wagner-sebastian.com >>>> seba.wag...@gmail.com >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "OpenMeetings User" group. >>>> To post to this group, send email to openmeetings-user@googlegroups.com >>>> . >>>> To unsubscribe from this group, send email to >>>> openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> >>>> . >>>> For more options, visit this group at >>>> http://groups.google.com/group/openmeetings-user?hl=en. >>>> >>> >>> >>> >>> -- >>> Richard, Chun-Wei Yo 游鈞為 >>> wei.kar...@gmail.com >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "OpenMeetings User" group. >>> To post to this group, send email to openmeetings-u...@googlegroups.com. >>> To unsubscribe from this group, send email to >>> openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> >>> . >>> For more options, visit this group at >>> http://groups.google.com/group/openmeetings-user?hl=en. >>> >> >> >> >> -- >> Sebastian Wagner >> http://www.webbase-design.de >> http://openmeetings.googlecode.com >> http://www.wagner-sebastian.com >> seba.wag...@gmail.com >> >> -- >> You received this message because you are subscribed to the Google Groups >> "OpenMeetings User" group. >> To post to this group, send email to openmeetings-u...@googlegroups.com. >> To unsubscribe from this group, send email to >> openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> >> . >> For more options, visit this group at >> http://groups.google.com/group/openmeetings-user?hl=en. >> > > > > -- > Richard, Chun-Wei Yo 游鈞為 > wei.kar...@gmail.com > > -- > You received this message because you are subscribed to the Google Groups > "OpenMeetings User" group. > To post to this group, send email to openmeetings-u...@googlegroups.com. > To unsubscribe from this group, send email to > openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> > . > For more options, visit this group at > http://groups.google.com/group/openmeetings-user?hl=en. > -- Sebastian Wagner http://www.webbase-design.de http://openmeetings.googlecode.com http://www.wagner-sebastian.com seba.wag...@gmail.com -- You received this message because you are subscribed to the Google Groups "OpenMeetings User" group. To post to this group, send email to openmeetings-u...@googlegroups.com. To unsubscribe from this group, send email to openmeetings-user+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/openmeetings-user?hl=en.