you can also try to run some of the ffmpeg commands openmeetings does standalone. That way you can verify its functionality without need for recording yet another session. The error-log that pops-up in the RecorderUI in openmeetings will give you some example commands.
Sebastian 2010/10/1 Sandhy Hasan <kazh...@gmail.com> > i'm sure installing single ffmpeg package installed, every step wrong, i'm > try with another fresh centos installed, so i'm sure 100% no package > duplicated... > > On Fri, Oct 1, 2010 at 4:48 PM, seba.wag...@gmail.com < > seba.wag...@gmail.com> wrote: > >> maybe you have multiple ffmpeg installations on your box?! >> >> Sebastian >> >> 2010/10/1 Sandhy Hasan <kazh...@gmail.com> >> >>> hello sebastian >>> >>> here the command when installing ffmpeg & sox >>> >>> >>> ffmpeg : >>> >>> ~:# svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg >>> >>> ~:# cd ffmpeg >>> >>> ~:# ./configure --prefix=/usr/local --enable-gpl --enable-postproc >>> --enable-nonfree --enable-avfilter --enable-pthreads --enable-libxvid >>> --enable-libx264 --enable-libmp3lame --enable-libfaac --enable-shared >>> --enable-libogg --enable-libvorbis >>> >>> >>> sox : >>> >>> ~:# wget -c >>> http://nchc.dl.sourceforge.net/project/sox/sox/14.3.1/sox-14.3.1.tar.gz >>> >>> ~:# ./configure --enable-libmp3lame --enable-gpl --enable-postproc >>> --enable-pthreads --enable-shared --enable-swscale --enable-vdpau >>> --enable-version3 >>> >>> ~:# tar zxvf sox-14.3.1.tar.gz >>> >>> ~:# cd sox-14.3.1 >>> >>> ~:# ./configure --prefix=/usr/local --enable-libmp3lame --enable-gpl >>> --enable-postproc --enable-pthreads --enable-shared --enable-swscale >>> --enable-vdpau --enable-version3 >>> >>> ~:# make -s && make install >>> >>> >>> this output ldconfig & ffmpeg -i command : >>> >>> >>> ~:# ldconfig -v | grep libmp3lame >>> >>> libmp3lame.so.0 -> libmp3lame.so.0.0.0 >>> ~:# ldconfig -v | libsox >>> libsox.so.1 -> libsox.so.1.0.0 >>> ~:# ffmpeg >>> built on Sep 28 2010 20:58:30 with gcc 4.1.2 20080704 (Red Hat >>> 4.1.2-48) >>> configuration: --enable-gpl --enable-postproc --enable-nonfree >>> --enable-avfilter --enable-pthreads --enable-libxvid --enable-libx264 >>> --enable-libmp3lame --enable-libfaac --enable-shared --enable-libvorbis >>> libavutil 50.31. 0 / 50.31. 0 >>> libavcore 0. 9. 0 / 0. 9. 0 >>> libavcodec 52.91. 1 / 52.91. 1 >>> libavformat 52.78. 5 / 52.78. 5 >>> libavdevice 52. 2. 2 / 52. 2. 2 >>> libavfilter 1.47. 1 / 1.47. 1 >>> libswscale 0.11. 0 / 0.11. 0 >>> libpostproc 51. 2. 0 / 51. 2. 0 >>> Hyper fast Audio and Video encoder >>> usage: ffmpeg [options] [[infile options] -i infile]... {[outfile >>> options] outfile}... >>> >>> Use -h to get full help or, even better, run 'man ffmpeg' >>> ~:# >>> >>> any idea to solve this problem ? >>> >>> >>> On Fri, Oct 1, 2010 at 2:35 PM, Sebastian Wagner >>> <seba.wag...@gmail.com>wrote: >>> >>>> error-Cannot run program "sox": java.io.IOException: error=2, No such >>>> file or directory >>>> >>>> that sounds very much like SoX is not executable. >>>> >>>> Could not find codec parameters (Video: [0][0][0][0] / 0x0000)[flv @ >>>> 0x8f62470] Could not find codec parameters >>>> >>>> that sounds very much like libmp3lame is not enabled or FFMPEG is too >>>> old. >>>> >>>> >>>> Sebastian >>>> >>>> On 1 Okt., 09:15, Zhen <kazh...@gmail.com> wrote: >>>> > i don't know this is bug with ffmpeg or OM, but when i try installing >>>> > OM 1.5 with debian, the problem dissapear. but with CentOS still >>>> > problem. i'll try to OpenSuSE later... >>>> > >>>> > @ Jien : you run OM with centos too ? >>>> > >>>> > On Oct 1, 8:49 am, Jien <chinj...@gmail.com> wrote: >>>> > >>>> > > I'm facing the same problem too. Everything was installed >>>> accordingly. >>>> > > Same as what Zhen had mentioned. Still this problem arise. Really >>>> > > appreciate it if there's someone who can help. :) >>>> > >>>> > > On Sep 29, 9:22 am, Zhen <kazh...@gmail.com> wrote: >>>> > >>>> > > > sox-14.3.1 >>>> > > > ffmpeg from svn configured with lib-mp3lame >>>> > >>>> > > > every recording process have different error, sometimes error says >>>> > > > - error-Cannot run program "sox": java.io.IOException: error=2, No >>>> > > > such file or directory >>>> > > > - Could not find codec parameters (Video: [0][0][0][0] / >>>> 0x0000)[flv @ >>>> > > > 0x8f62470] Could not find codec parameters >>>> > >>>> > > > i've tried to re-install openmeeting and operating system (centos >>>> > > > 5.5). re-install centos 5.5 x86_64 change to centos 5.4 i386 and >>>> still >>>> > > > error. >>>> > > > please help... >>>> > >>>> > > > On Sep 28, 3:36 pm, Sebastian Wagner <seba.wag...@gmail.com> >>>> wrote: >>>> > >>>> > > > > Hi Zhen, >>>> > >>>> > > > > did you also install SoX? >>>> > >>>> > > > > *error-Cannot run program "sox": java.io.IOException: error=2, >>>> No such >>>> > > > > file or directory * >>>> > >>>> > > > > Sebastian >>>> > >>>> > > > > On Sep 27, 7:46 pm, Zhen <kazh...@gmail.com> wrote: >>>> > >>>> > > > > > Please help me to solve this problem. >>>> > > > > > OpenMeeting installed with CentOS 5.4, i'm try to recompile >>>> ffmpeg, >>>> > > > > > sox, with the latest version, but openmeeting still show error >>>> like >>>> > > > > > this : >>>> > >>>> > > > > > Log:28.09.2010 07:44:05 >>>> > > > > > generateFFMPEG >>>> > > > > > process-mergeWave >>>> > > > > > error-Cannot run program "sox": java.io.IOException: error=2, >>>> No such >>>> > > > > > file or directory >>>> > > > > > command-[sox, >>>> /usr/lib/openmeetings/red5/webapps/openmeetings/streams/ >>>> > > > > > hibernate/one_second.wav, /usr/lib/openmeetings/red5/webapps/ >>>> > > > > > openmeetings/streams/4/ >>>> > > > > > >>>> rec_9_stream_de3db890f0a281779bfecb4492130788_28_09_2010_07_43_44_FINAL_WAV >>>> E.wav, >>>> > > > > > pad, 0, 20.0] >>>> > > > > > exitValue--1 >>>> > >>>> > > > > > Log:28.09.2010 07:44:05 >>>> > > > > > generateFFMPEG >>>> > > > > > process-generateFullFLV >>>> > > > > > error-FFmpeg version 0.6, Copyright (c) 2000-2010 the FFmpeg >>>> > > > > > developers built on Sep 28 2010 07:39:37 with gcc 4.1.2 >>>> 20080704 (Red >>>> > > > > > Hat 4.1.2-48) configuration: --enable-libmp3lame --enable-gpl >>>> -- >>>> > > > > > enable-postproc --enable-pthreads --enable-shared >>>> --enable-swscale -- >>>> > > > > > enable-vdpau --enable-version3 --enable-x11grab --disable-yasm >>>> -- >>>> > > > > > disable-stripping libavutil 50.15. 1 / 50.15. 1 >>>> libavcodec >>>> > > > > > 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 >>>> libavdevice >>>> > > > > > 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 >>>> libpostproc >>>> > > > > > 51. 2. 0 / 51. 2. 0[flv @ 0x9080420]Could not find codec >>>> parameters >>>> > > > > > (Video: 0x0000)[flv @ 0x9080420]Could not find codec >>>> parameters >>>> > > > > > (Audio: 0x0000, 0 channels)[flv @ 0x9080420]Estimating >>>> duration from >>>> > > > > > bitrate, this may be >>>> inaccurate/usr/lib/openmeetings/red5/webapps/ >>>> > > > > > openmeetings/streams/4/ >>>> > > > > > >>>> rec_9_stream_de3db890f0a281779bfecb4492130788_28_09_2010_07_43_44.flv: >>>> > > > > > could not find codec parameters >>>> > > > > > command-[ffmpeg, -i, >>>> /usr/lib/openmeetings/red5/webapps/openmeetings/ >>>> > > > > > streams/4/ >>>> > > > > > >>>> rec_9_stream_de3db890f0a281779bfecb4492130788_28_09_2010_07_43_44.flv, >>>> > > > > > -i, /usr/lib/openmeetings/red5/webapps/openmeetings/streams/4/ >>>> > > > > > >>>> rec_9_stream_de3db890f0a281779bfecb4492130788_28_09_2010_07_43_44_FINAL_WAV >>>> E.wav, >>>> > > > > > -ar, 22050, -acodec, libmp3lame, -ab, 32k, -s, 416x256, >>>> -vcodec, >>>> > > > > > flashsv, -map, 0.0, -map, 1.0, >>>> /usr/lib/openmeetings/red5/webapps/ >>>> > > > > > openmeetings/streams/hibernate/flvRecording_9.flv] >>>> > > > > > exitValue-1 >>>> > >>>> > > > > > Log:28.09.2010 07:44:05 >>>> > > > > > generateFFMPEG >>>> > > > > > process-generateFullFLV >>>> > > > > > error-FFmpeg version 0.6, Copyright (c) 2000-2010 the FFmpeg >>>> > > > > > developers built on Sep 28 2010 07:39:37 with gcc 4.1.2 >>>> 20080704 (Red >>>> > > > > > Hat 4.1.2-48) configuration: --enable-libmp3lame --enable-gpl >>>> -- >>>> > > > > > enable-postproc --enable-pthreads --enable-shared >>>> --enable-swscale -- >>>> > > > > > enable-vdpau --enable-version3 --enable-x11grab --disable-yasm >>>> -- >>>> > > > > > disable-stripping libavutil 50.15. 1 / 50.15. 1 >>>> libavcodec >>>> > > > > > 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 >>>> libavdevice >>>> > > > > > 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 >>>> libpostproc >>>> > > > > > 51. 2. 0 / 51. 2. >>>> 0/usr/lib/openmeetings/red5/webapps/openmeetings/ >>>> > > > > > streams/hibernate/flvRecording_9.flv: No such file or >>>> directory >>>> > > > > > command-[ffmpeg, -i, >>>> /usr/lib/openmeetings/red5/webapps/openmeetings/ >>>> > > > > > streams/hibernate/flvRecording_9.flv, -vcodec, mjpeg, >>>> -vframes, 1, - >>>> > > > > > an, -f, rawvideo, -s, 416x256, >>>> /usr/lib/openmeetings/red5/webapps/ >>>> > > > > > openmeetings/streams/hibernate/flvRecording_9.jpg] >>>> > > > > > exitValue-1 >>>> > >>>> > > > > > Log:28.09.2010 07:44:05 >>>> > > > > > generateFFMPEG >>>> > > > > > process-alternateDownload >>>> > > > > > error-FFmpeg version 0.6, Copyright (c) 2000-2010 the FFmpeg >>>> > > > > > developers built on Sep 28 2010 07:39:37 with gcc 4.1.2 >>>> 20080704 (Red >>>> > > > > > Hat 4.1.2-48) configuration: --enable-libmp3lame --enable-gpl >>>> -- >>>> > > > > > enable-postproc --enable-pthreads --enable-shared >>>> --enable-swscale -- >>>> > > > > > enable-vdpau --enable-version3 --enable-x11grab --disable-yasm >>>> -- >>>> > > > > > disable-stripping libavutil 50.15. 1 / 50.15. 1 >>>> libavcodec >>>> > > > > > 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 >>>> libavdevice >>>> > > > > > 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 >>>> libpostproc >>>> > > > > > 51. 2. 0 / 51. 2. >>>> 0/usr/lib/openmeetings/red5/webapps/openmeetings/ >>>> > > > > > streams/hibernate/flvRecording_9.flv: No such file or >>>> directory >>>> > > > > > command-[ffmpeg, -i, >>>> /usr/lib/openmeetings/red5/webapps/openmeetings/ >>>> > > > > > streams/hibernate/flvRecording_9.flv, >>>> /usr/lib/openmeetings/red5/ >>>> > > > > > webapps/openmeetings/streams/hibernate/flvRecording_9.avi] >>>> > > > > > exitValue-1 >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "OpenMeetings User" group. >>>> To post to this group, send email to openmeetings-user@googlegroups.com >>>> . >>>> To unsubscribe from this group, send email to >>>> openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> >>>> . >>>> For more options, visit this group at >>>> http://groups.google.com/group/openmeetings-user?hl=en. >>>> >>>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "OpenMeetings User" group. >>> To post to this group, send email to openmeetings-u...@googlegroups.com. >>> To unsubscribe from this group, send email to >>> openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> >>> . >>> For more options, visit this group at >>> http://groups.google.com/group/openmeetings-user?hl=en. >>> >> >> >> >> -- >> Sebastian Wagner >> http://www.webbase-design.de >> http://openmeetings.googlecode.com >> http://www.wagner-sebastian.com >> seba.wag...@gmail.com >> >> -- >> You received this message because you are subscribed to the Google Groups >> "OpenMeetings User" group. >> To post to this group, send email to openmeetings-u...@googlegroups.com. >> To unsubscribe from this group, send email to >> openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> >> . >> For more options, visit this group at >> http://groups.google.com/group/openmeetings-user?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "OpenMeetings User" group. > To post to this group, send email to openmeetings-u...@googlegroups.com. > To unsubscribe from this group, send email to > openmeetings-user+unsubscr...@googlegroups.com<openmeetings-user%2bunsubscr...@googlegroups.com> > . > For more options, visit this group at > http://groups.google.com/group/openmeetings-user?hl=en. > -- Sebastian Wagner http://www.webbase-design.de http://openmeetings.googlecode.com http://www.wagner-sebastian.com seba.wag...@gmail.com -- You received this message because you are subscribed to the Google Groups "OpenMeetings User" group. To post to this group, send email to openmeetings-u...@googlegroups.com. To unsubscribe from this group, send email to openmeetings-user+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/openmeetings-user?hl=en.