Hi all, I'm new on this mailing list.
Yesturday, I tried to upgrade my GSM firmware. I strictly followed to wiki https://wiki.openmoko.org/wiki/GSM/Flashing After loadinf FLUID everything were fine ... I started again the module by typing 's3c24xx-gpio b7=1' as said in the wiki, and it started to flash the firmware. While it was flashing (I could see the progress ...) It failed by a 'Flash operation timeout'error Now, the GSM module seems to not respond anymore :'( If I retry, I get : [EMAIL PROTECTED]:/usr/sbin# FLUID_PORT=/dev/ttySAC0 FLUID_FLOWCONTROL=h fluid.exe \ > -oO -b 115200 \ > -f $HOME/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0 FLUID Revision 2.27, (23 Aug 2004). Copyright Texas Instruments, 2001-2004. Reading image file: '/home/root/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0' (2138kB) ok Bootloader: But nothing append even if I start the module by typing in another terminal 's3c24xx-gpio b7=1' Every [EMAIL PROTECTED]:~# cat /dev/ttySAC0 & [EMAIL PROTECTED]:~# echo -en 'AT\r' >/dev/ttySAC0 [EMAIL PROTECTED]:~# echo -en 'AT+CGMR\r' >/dev/ttySAC0 does not say anything ... Can somebody please help me ?
