We can get rid of quite a few backslashes since in modern C, consecutive strings are concatenated at compile time.
Signed-off-by: Werner Almesberger <[email protected]> --- diff --git a/src/cpu/s3c2410/gta01.c b/src/cpu/s3c2410/gta01.c index 15fc315..0371505 100644 --- a/src/cpu/s3c2410/gta01.c +++ b/src/cpu/s3c2410/gta01.c @@ -146,13 +146,13 @@ void port_init_gta01(void) *MPLLCON = ((0x7d << 12) + (0x1 << 4) + 0x1); /* Delay after update of PLL: Page 7-19, seven nops */ asm __volatile__ ( - "nop\n"\ - "nop\n"\ - "nop\n"\ - "nop\n"\ - "nop\n"\ - "nop\n"\ - "nop\n"\ + "nop\n" + "nop\n" + "nop\n" + "nop\n" + "nop\n" + "nop\n" + "nop\n" ); @@ -256,17 +256,17 @@ const struct board_api board_api_gta01 = { .get_ui_keys = get_ui_keys_gta01, .get_ui_debug = get_ui_debug_gta01, - .commandline_board = "mtdparts=" \ - "neo1973-nand:" \ - "0x00040000(qi)," \ - "0x00004000(u-boot_env)," \ - "0x00200000(kernel)," \ - "0x000a0000(splash)," \ - "0x03d1c000(rootfs) " \ - "loglevel=4 " \ - "console=tty0 "\ - "console=ttySAC0,115200 " \ - "init=/sbin/init "\ + .commandline_board = "mtdparts=" + "neo1973-nand:" + "0x00040000(qi)," + "0x00004000(u-boot_env)," + "0x00200000(kernel)," + "0x000a0000(splash)," + "0x03d1c000(rootfs) " + "loglevel=4 " + "console=tty0 " + "console=ttySAC0,115200 " + "init=/sbin/init " "ro ", .commandline_board_debug = " loglevel=8 ", .noboot = "boot/noboot-GTA01", @@ -305,7 +305,7 @@ const struct board_api board_api_gta01 = { .block_read = nand_read_ll, .offset_blocks512_if_no_partition = 0x44000 / 512, .filesystem = FS_RAW, - .commandline_append = "rootfstype=jffs2 " \ + .commandline_append = "rootfstype=jffs2 " "root=/dev/mtdblock4 ", }, }, diff --git a/src/cpu/s3c2442/gta02.c b/src/cpu/s3c2442/gta02.c index b2671b3..e9bc0a3 100644 --- a/src/cpu/s3c2442/gta02.c +++ b/src/cpu/s3c2442/gta02.c @@ -307,13 +307,13 @@ void port_init_gta02(void) *UPLLCON = ((88 << 12) + (4 << 4) + 2); /* Magic delay: Page 7-19, seven nops between UPLL and MPLL */ asm __volatile__ ( - "nop\n"\ - "nop\n"\ - "nop\n"\ - "nop\n"\ - "nop\n"\ - "nop\n"\ - "nop\n"\ + "nop\n" + "nop\n" + "nop\n" + "nop\n" + "nop\n" + "nop\n" + "nop\n" ); /* configure MPLL */ *MPLLCON = ((42 << 12) + (1 << 4) + 0); @@ -666,10 +666,10 @@ const struct board_api board_api_gta02 = { .get_ui_keys = get_ui_keys_gta02, .get_ui_debug = get_ui_debug_gta02, .set_ui_indication = set_ui_indication_gta02, - .commandline_board = "loglevel=4 " \ - "console=tty0 " \ - "console=ttySAC2,115200 " \ - "init=/sbin/init " \ + .commandline_board = "loglevel=4 " + "console=tty0 " + "console=ttySAC2,115200 " + "init=/sbin/init " "ro ", .commandline_board_debug = " loglevel=8", .noboot = "boot/noboot-GTA02", @@ -709,7 +709,7 @@ const struct board_api board_api_gta02 = { /* NOTE offset below is replaced at runtime */ .offset_blocks512_if_no_partition = 0x80000 / 512, .filesystem = FS_RAW, - .commandline_append = " rootfstype=jffs2 " \ + .commandline_append = " rootfstype=jffs2 " "root=/dev/mtdblock6 ", }, }, diff --git a/src/cpu/s3c6410/om_3d7k-steppingstone.c b/src/cpu/s3c6410/om_3d7k-steppingstone.c index e181441..71c57f9 100644 --- a/src/cpu/s3c6410/om_3d7k-steppingstone.c +++ b/src/cpu/s3c6410/om_3d7k-steppingstone.c @@ -85,11 +85,11 @@ const struct board_api board_api_om_3d7k = { .noboot = "boot/noboot-OM_3D7K", .append = "boot/append-OM_3D7K", .get_ui_keys = get_ui_keys_om_3d7k, - .commandline_board = "console=tty0 " \ - "console=ttySAC3,115200 " \ - "init=/sbin/init " \ - "loglevel=8 " \ - "rootdelay=1 no_console_suspend " \ + .commandline_board = "console=tty0 " + "console=ttySAC3,115200 " + "init=/sbin/init " + "loglevel=8 " + "rootdelay=1 no_console_suspend " "ro ", .commandline_board_debug = " loglevel=8", .kernel_source = { diff --git a/src/cpu/s3c6410/smdk6410-steppingstone.c b/src/cpu/s3c6410/smdk6410-steppingstone.c index 5bc05f0..c1d991f 100644 --- a/src/cpu/s3c6410/smdk6410-steppingstone.c +++ b/src/cpu/s3c6410/smdk6410-steppingstone.c @@ -45,8 +45,8 @@ const struct board_api board_api_smdk6410 = { .get_board_variant = get_board_variant_smdk6410, .is_this_board = is_this_board_smdk6410, .putc = putc_smdk6410, - .commandline_board = "console=ttySAC0,115200 " \ - "loglevel=3 " \ + .commandline_board = "console=ttySAC0,115200 " + "loglevel=3 " "init=/bin/sh ", .commandline_board_debug = " loglevel=8", .noboot = "boot/noboot-SDMK6410",
