No response on openmoko-kernel, forwarding to devel ML (with correct address).
Regards, Dmitry ---------- Forwarded message ---------- From: Dmitry Kurochkin <[email protected]> Date: Sat, Mar 7, 2009 at 1:17 PM Subject: [Qi] bad magic when booting from NAND To: [email protected] Hello. Qi fails to boot from NAND. Qi booting from SD goes fine. Booting NAND from NOR works as well. Here is jtag console output: Qi Bootloader s3c2442 octopus master-hist_3b8513d8b3d9615e Tue Mar 3 13:06:33 GMT 2009 Copyright (C) 2008 Openmoko, Inc. Detected: Freerunner / GTA02, A6 PCB Battery condition reasonable Trying kernel: SD Card EXT2 P1 Kernel Card Type: SD 2.0 SDHC / Mfr: 0x03, OEM "SD" / SU08G", rev 8.0 / s/n: 1882195497 / date: 7/2008 SDHC size: 7790 MiB Partition: 1 start +16 512-byte blocks, size 7790 MiB ** skipping Failed to mount ext2 filesystem... Unable to mount ext2 filesystem Trying kernel: SD Card EXT2 P2 Kernel Partition: 2 start +0 512-byte blocks, size 0 MiB ** ext2fs_devread() read outside partition sector 2 Failed to mount ext2 filesystem... Unable to mount ext2 filesystem Trying kernel: SD Card EXT2 P3 Kernel Partition: 3 start +0 512-byte blocks, size 0 MiB ** ext2fs_devread() read outside partition sector 2 Failed to mount ext2 filesystem... Unable to mount ext2 filesystem Trying kernel: NAND Kernel RAW open: +1024 512-byte blocks Found: "openmoko/2.6.28-oe1+gitr34240a1c" Size: 1933 KiB RAW open: +1024 512-byte blocks Bad kernel header bad magic 6f6b6f6d No usable kernel image found Memory Testing 0x30000000 length 128 MB Regards, Dmitry
