General cleanups. Now we pass checkpatch.pl. Signed-off-by: Nelson Castillo <[email protected]> ---
drivers/input/touchscreen/s3c2410_ts.c | 192 ++++++++++++++++---------------- 1 files changed, 94 insertions(+), 98 deletions(-) diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 760b13c..d78f466 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -19,7 +19,7 @@ * ChangeLog * * 2004-09-05: Herbert Pötzl <[email protected]> - * - added clock (de-)allocation code + * - Added clock (de-)allocation code * * 2005-03-06: Arnaud Patard <[email protected]> * - h1940_ -> s3c2410 (this driver is now also used on the n30 @@ -38,11 +38,15 @@ * - Add proper support for S32440 * * 2008-06-23: Andy Green <[email protected]> - * - removed averaging system - * - added generic Touchscreen filter stuff + * - Removed averaging system + * - Added generic Touchscreen filter stuff * * 2008-11-27: Nelson Castillo <[email protected]> - * - improve interrupt handling + * - Improve interrupt handling + * + * 2009-04-09: Nelson Castillo <[email protected]> + * - Use s3c-adc API (Vasily Khoruzhick <[email protected]> provided + * a working example for a simpler version of this driver). */ #include <linux/errno.h> @@ -57,7 +61,7 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/clk.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/irq.h> #include <mach/regs-gpio.h> @@ -71,15 +75,20 @@ /* For ts.dev.id.version */ #define S3C2410TSVERSION 0x0101 -#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) +#define WAIT4INT(x) (((x)<<8) | \ + S3C2410_ADCTSC_YM_SEN | \ + S3C2410_ADCTSC_YP_SEN | \ + S3C2410_ADCTSC_XP_SEN | \ + S3C2410_ADCTSC_XY_PST(3)) -#define WAIT4INT(x) (((x)<<8) | \ - S3C2410_ADCTSC_YM_SEN | \ - S3C2410_ADCTSC_YP_SEN | \ - S3C2410_ADCTSC_XP_SEN | \ - S3C2410_ADCTSC_XY_PST(3)) +#define TSPRINTK(fmt, args...) \ + printk(KERN_DEBUG "%s: " fmt, __func__ , ## args) +#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG +# define DPRINTK TSPRINTK +#else +# define DPRINTK(fmt, args...) +#endif -#define DEBUG_LVL KERN_DEBUG MODULE_AUTHOR("Arnaud Patard <[email protected]>"); MODULE_DESCRIPTION("s3c2410 touchscreen driver"); @@ -92,24 +101,22 @@ MODULE_LICENSE("GPL"); static char *s3c2410ts_name = "s3c2410 TouchScreen"; #define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */ -#define TS_EVENT_FIFO_SIZE (2 << 6) /* must be a power of 2 */ - -#define TS_STATE_STANDBY 0 /* initial state */ -#define TS_STATE_PRESSED 1 -#define TS_STATE_RELEASE_PENDING 2 -#define TS_STATE_RELEASE 3 +#define TS_EVENT_FIFO_SIZE (2 << 6) /* Must be a power of 2. */ /* * Per-touchscreen data. */ +enum ts_state {TS_STATE_STANDBY, TS_STATE_PRESSED, TS_STATE_RELEASE_PENDING, + TS_STATE_RELEASE}; + struct s3c2410ts { struct input_dev *dev; - struct s3c_adc_client *adc_client; struct ts_filter_chain *chain; + enum ts_state state; int is_down; - int state; struct kfifo *event_fifo; + struct s3c_adc_client *adc_client; unsigned adc_selected; }; @@ -129,6 +136,10 @@ static inline void s3c2410_ts_connect(void) s3c2410_gpio_cfgpin(S3C2410_GPG15, S3C2410_GPG15_nYPON); } +/* + * Code that starts ADC conversions. + */ + static void ts_adc_timer_f(unsigned long data); static struct timer_list ts_adc_timer = TIMER_INITIALIZER(ts_adc_timer_f, 0, 0); @@ -138,11 +149,6 @@ static void ts_adc_timer_f(unsigned long data) mod_timer(&ts_adc_timer, jiffies + 1); } -void adc_selected_f(unsigned selected) -{ - ts.adc_selected = selected; -} - static void s3c2410_ts_start_adc_conversion(void) { if (ts.adc_selected) @@ -151,6 +157,12 @@ static void s3c2410_ts_start_adc_conversion(void) ts_adc_timer_f(0); } +/* Callback for the s3c-adc API. */ +void adc_selected_f(unsigned selected) +{ + ts.adc_selected = selected; +} + /* * Just send the input events. */ @@ -172,18 +184,14 @@ static void ts_input_report(int event, int coords[]) input_report_key(ts.dev, BTN_TOUCH, 1); input_report_abs(ts.dev, ABS_PRESSURE, 1); -#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG - printk(DEBUG_LVL "T:%06d %6s (X:%03d, Y:%03d)\n", - (int)tv.tv_usec, s[event], coords[0], coords[1]); -#endif + DPRINTK("T:%06d %6s (X:%03d, Y:%03d)\n", + (int)tv.tv_usec, s[event], coords[0], coords[1]); } else { input_report_key(ts.dev, BTN_TOUCH, 0); input_report_abs(ts.dev, ABS_PRESSURE, 0); -#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG - printk(DEBUG_LVL "T:%06d %6s\n", - (int)tv.tv_usec, s[event]); -#endif + DPRINTK("T:%06d %6s\n", + (int)tv.tv_usec, s[event]); } input_sync(ts.dev); @@ -210,7 +218,7 @@ static void event_send_timer_f(unsigned long data) switch (event_type) { case 'D': if (ts.state == TS_STATE_RELEASE_PENDING) - /* Ignore short UP event */ + /* Ignore short UP event. */ ts.state = TS_STATE_PRESSED; break; @@ -219,21 +227,21 @@ static void event_send_timer_f(unsigned long data) break; case 'P': - if (ts.is_down) /* stylus_action needs a conversion */ + if (ts.is_down) /* Stylus_action needs a conversion. */ s3c2410_ts_start_adc_conversion(); if (unlikely(__kfifo_get(ts.event_fifo, (unsigned char *)buf, sizeof(int) * 2) - != sizeof(int) * 2)) - goto ts_exit_error; + != sizeof(int) * 2)) { + /* This will only happen if we have a bug. */ + TSPRINTK("Invalid packet\n"); + return; + } ts_input_report(IE_DOWN, buf); ts.state = TS_STATE_PRESSED; break; - - default: - goto ts_exit_error; } noop_counter = 0; @@ -254,11 +262,6 @@ static void event_send_timer_f(unsigned long data) } else { mod_timer(&event_send_timer, jiffies + TS_RELEASE_TIMEOUT); } - - return; - -ts_exit_error: /* should not happen unless we have a bug */ - printk(KERN_ERR __FILE__ ": event_send_timer_f failed\n"); } /* @@ -271,22 +274,23 @@ static irqreturn_t stylus_updown(int irq, void *dev_id) unsigned long data1; int event_type; - data0 = readl(base_addr+S3C2410_ADCDAT0); - data1 = readl(base_addr+S3C2410_ADCDAT1); + data0 = readl(base_addr + S3C2410_ADCDAT0); + data1 = readl(base_addr + S3C2410_ADCDAT1); - ts.is_down = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && - (!(data1 & S3C2410_ADCDAT0_UPDOWN)); + ts.is_down = !(data0 & S3C2410_ADCDAT0_UPDOWN) && + !(data1 & S3C2410_ADCDAT0_UPDOWN); event_type = ts.is_down ? 'D' : 'U'; if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)&event_type, - sizeof(int)) != sizeof(int))) /* should not happen */ - printk(KERN_ERR __FILE__": stylus_updown lost event!\n"); + sizeof(int)) != sizeof(int))) + /* Only happens if we have a bug. */ + TSPRINTK("FIFO full\n"); if (ts.is_down) s3c2410_ts_start_adc_conversion(); else - writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); + writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC); mod_timer(&event_send_timer, jiffies + 1); @@ -317,11 +321,9 @@ static void stylus_adc_action(unsigned p0, unsigned p1, unsigned *conv_left) buf[0] = 'P'; break; default: - printk(KERN_ERR __FILE__ - ":%d Invalid ts_filter_chain_feed return value.\n", - __LINE__); + TSPRINTK("invalid return value\n"); case -1: - /* Error. Ignore the event. */ + /* Too much noise. Ignore the event. */ ts_filter_chain_clear(ts.chain); writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC); return; @@ -329,7 +331,8 @@ static void stylus_adc_action(unsigned p0, unsigned p1, unsigned *conv_left) if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)buf, sizeof(int) * 3) != sizeof(int) * 3)) - printk(KERN_ERR __FILE__":stylus_action bug.\n"); + /* This will only happen if we have a bug. */ + TSPRINTK("FIFO full\n"); writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC); mod_timer(&event_send_timer, jiffies + 1); @@ -352,24 +355,18 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data; - if (!info) - { - dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n"); + if (!info) { + dev_err(&pdev->dev, "No platform data\n"); return -EINVAL; } -#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG - printk(DEBUG_LVL "Entering s3c2410ts_init\n"); -#endif - - base_addr = ioremap(S3C2410_PA_ADC,0x20); + base_addr = ioremap(S3C2410_PA_ADC, 0x20); if (base_addr == NULL) { dev_err(&pdev->dev, "Failed to remap register block\n"); ret = -ENOMEM; goto bail0; } - /* If we acutally are a S3C2410: Configure GPIOs */ if (!strcmp(pdev->name, "s3c2410-ts")) s3c2410_ts_connect(); @@ -416,7 +413,7 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) goto bail2; } - /* create the filter chain set up for the 2 coordinates we produce */ + /* Create the filter chain set up for the 2 coordinates we produce. */ ts.chain = ts_filter_chain_create(pdev, info->filter_config, 2); if (IS_ERR(ts.chain)) @@ -430,26 +427,26 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n"); iounmap(base_addr); ret = -EIO; - goto bail4; + goto bail3; } dev_info(&pdev->dev, "Successfully loaded\n"); - /* All went ok, so register to the input system */ + /* All went ok. Register to the input system. */ rc = input_register_device(ts.dev); if (rc) { dev_info(&pdev->dev, "Could not register input device\n"); ret = -EIO; - goto bail5; + goto bail4; } return 0; -bail5: +bail4: free_irq(IRQ_TC, ts.dev); iounmap(base_addr); disable_irq(IRQ_TC); -bail4: +bail3: ts_filter_chain_destroy(ts.chain); kfifo_free(ts.event_fifo); bail2: @@ -464,7 +461,7 @@ bail0: static int s3c2410ts_remove(struct platform_device *pdev) { disable_irq(IRQ_TC); - free_irq(IRQ_TC,ts.dev); + free_irq(IRQ_TC, ts.dev); s3c_adc_release(ts.adc_client); input_unregister_device(ts.dev); @@ -478,12 +475,15 @@ static int s3c2410ts_remove(struct platform_device *pdev) } #ifdef CONFIG_PM + +#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | \ + S3C2410_ADCTSC_XY_PST(0)) + static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state) { - writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC); - writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM, - base_addr+S3C2410_ADCCON); - + writel(TSC_SLEEP, base_addr + S3C2410_ADCTSC); + writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_STDBM, + base_addr + S3C2410_ADCCON); disable_irq(IRQ_TC); return 0; @@ -492,10 +492,8 @@ static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state) static int s3c2410ts_resume(struct platform_device *pdev) { ts_filter_chain_clear(ts.chain); - enable_irq(IRQ_TC); - - writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); + writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC); return 0; } @@ -506,27 +504,25 @@ static int s3c2410ts_resume(struct platform_device *pdev) #endif static struct platform_driver s3c2410ts_driver = { - .driver = { - .name = "s3c2410-ts", - .owner = THIS_MODULE, - }, - .probe = s3c2410ts_probe, - .remove = s3c2410ts_remove, - .suspend = s3c2410ts_suspend, - .resume = s3c2410ts_resume, - + .driver = { + .name = "s3c2410-ts", + .owner = THIS_MODULE, + }, + .probe = s3c2410ts_probe, + .remove = s3c2410ts_remove, + .suspend = s3c2410ts_suspend, + .resume = s3c2410ts_resume, }; static struct platform_driver s3c2440ts_driver = { - .driver = { - .name = "s3c2440-ts", - .owner = THIS_MODULE, - }, - .probe = s3c2410ts_probe, - .remove = s3c2410ts_remove, - .suspend = s3c2410ts_suspend, - .resume = s3c2410ts_resume, - + .driver = { + .name = "s3c2440-ts", + .owner = THIS_MODULE, + }, + .probe = s3c2410ts_probe, + .remove = s3c2410ts_remove, + .suspend = s3c2410ts_suspend, + .resume = s3c2410ts_resume, }; static int __init s3c2410ts_init(void)
