host->irq_works is always true, so, the IRQ polling function in glamo-mci.c 
never gets called.
Furthermore, according to Lars, it was only here for very early prototypes of 
the glamo chip.
So, there should be no issue in dropping it.
---
 drivers/mfd/glamo/glamo-mci.c |   43 -----------------------------------------
 1 files changed, 0 insertions(+), 43 deletions(-)

diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
index 74e784e..1d3f9af 100644
--- a/drivers/mfd/glamo/glamo-mci.c
+++ b/drivers/mfd/glamo/glamo-mci.c
@@ -578,43 +578,6 @@ static int glamo_mci_prepare_pio(struct glamo_mci_host 
*host,
        return 0;
 }
 
-static int glamo_mci_irq_poll(struct glamo_mci_host *host,
-                               struct mmc_command *cmd)
-{
-       int timeout = 1000000;
-       uint16_t status;
-       /*
-        * if the glamo INT# line isn't wired (*cough* it can happen)
-        * I'm afraid we have to spin on the IRQ status bit and "be
-        * our own INT# line"
-        */
-       /*
-        * we have faith we will get an "interrupt"...
-        * but something insane like suspend problems can mean
-        * we spin here forever, so we timeout after a LONG time
-        */
-       do {
-               status = glamo_reg_read(host, GLAMO_REG_IRQ_STATUS);
-       } while ((--timeout) && !(status & GLAMO_IRQ_MMC));
-
-       if (timeout <= 0) {
-               if (cmd->data->error)
-                       cmd->data->error = -ETIMEDOUT;
-               dev_err(&host->pdev->dev, "Payload timeout\n");
-               return -ETIMEDOUT;
-       }
-       /* ack this interrupt source */
-       writew(GLAMO_IRQ_MMC, host->core->base +
-                  GLAMO_REG_IRQ_CLEAR);
-
-       /* yay we are an interrupt controller! -- call the ISR
-        * it will stop clock to card
-        */
-       glamo_mci_irq(host->irq, host);
-
-       return 0;
-}
-
 static void glamo_mci_send_request(struct mmc_host *mmc,
                                        struct mmc_request *mrq)
 {
@@ -644,12 +607,6 @@ static void glamo_mci_send_request(struct mmc_host *mmc,
        if (!cmd->data || cmd->error)
                goto done;
 
-
-       if (!host->core->irq_works) {
-               if (glamo_mci_irq_poll(host, mrq->cmd))
-                       goto done;
-       }
-
        /*
         * Otherwise can can use the interrupt as async completion --
         * if there is read data coming, or we wait for write data to complete,
-- 
1.7.1


Reply via email to