Hi Jörg. Thanks for the pointer. :) I'll check out the patch, probably tomorrow (it's too late for me to start a build right now).
Love Jens On Mon, 24 Feb 2014 17:35:50 +0100, Jörg Fischer wrote: > Hi, > Am 24.02.2014 08:15, schrieb Jens Bauer: >> The LPC812 datasheet does not mention a TAP ID for the LPC8xx devices. >> So I asked NXP for the TAP ID, and they replied that 0x0BC11477 >> should work. >> But I have not been able to communicate with my device using >> JTAG-lock-pick Tiny 2 or any of my Olimex adapters. > > According to the datasheet, JTAG only works as boundary scan when Reset > is held *low*, > that means the chip is held in reset state. > > You need to use SWD for debugging. > > Note that there is a new SWD pacth in gerrit for SWD with FTDI adapters. > > -- Jörg Fischer > > > > ------------------------------------------------------------------------------ > Flow-based real-time traffic analytics software. Cisco certified tool. > Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer > Customize your own dashboards, set traffic alerts and generate reports. > Network behavioral analysis & security monitoring. All-in-one tool. > http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk > _______________________________________________ > OpenOCD-devel mailing list > OpenOCD-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openocd-devel ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel