Cannot reproduce, at least not with FTDI. If the reset line is tied low,
exactly this will happen. Bad wiring?
---
** [tickets:#83] "reset halt" fails with a blank STM32F1 when
connect_assert_srst is used**
**Status:** new
**Milestone:** 0.9.0
**Created:** Mon Dec 01, 2014 08:20 PM UTC by Paul Fertser
**Last Updated:** Mon Dec 01, 2014 08:20 PM UTC
**Owner:** nobody
TheSeven reports:
Open On-Chip Debugger 0.8.0 (2014-04-28-08:39)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
User : 13 3 command.c:546 command_print(): debug_level: 3
Debug: 14 7 options.c:98 add_default_dirs(): bindir=bin
Debug: 15 10 options.c:99 add_default_dirs(): pkgdatadir=
Debug: 16 13 options.c:100 add_default_dirs():
run_prefix=E:/tmp/_flexperiment/tools/
Debug: 17 17 configuration.c:44 add_script_search_dir(): adding
C:\Users\theseven\AppData\Roaming/OpenOCD
Debug: 18 22 configuration.c:44 add_script_search_dir(): adding
E:/tmp/_flexperiment/tools//site
Debug: 19 30 configuration.c:44 add_script_search_dir(): adding
E:/tmp/_flexperiment/tools//scripts
Debug: 20 37 configuration.c:84 find_file(): found
E:/tmp/_flexperiment/tools//scripts/interface/stlink-v2.cfg
Debug: 21 44 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_interface hla
Debug: 22 50 command.c:145 script_debug(): command - interface ocd_interface hla
Debug: 24 55 command.c:366 register_command_handler(): registering
'ocd_hla_device_desc'...
Debug: 25 61 command.c:366 register_command_handler(): registering
'ocd_hla_serial'...
Debug: 26 68 command.c:366 register_command_handler(): registering
'ocd_hla_layout'...
Debug: 27 73 command.c:366 register_command_handler(): registering
'ocd_hla_vid_pid'...
Debug: 28 79 command.c:366 register_command_handler(): registering
'ocd_trace'...
Debug: 29 84 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_hla_layout stlink
Debug: 30 91 command.c:145 script_debug(): command - hla_layout ocd_hla_layout
stlink
Debug: 32 95 hla_interface.c:176 hl_interface_handle_layout_command():
hl_interface_handle_layout_command
Debug: 33 101 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_hla_device_desc ST-LINK/V2
Debug: 34 107 command.c:145 script_debug(): command - hla_device_desc
ocd_hla_device_desc ST-LINK/V2
Debug: 36 114 hla_interface.c:150 hl_interface_handle_device_desc_command():
hl_interface_handle_device_desc_command
Debug: 37 122 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_hla_vid_pid 0x0483 0x3748
Debug: 38 129 command.c:145 script_debug(): command - hla_vid_pid
ocd_hla_vid_pid 0x0483 0x3748
Debug: 40 134 hla_interface.c:204 hl_interface_handle_vid_pid_command():
hl_interface_handle_vid_pid_command
Debug: 41 140 configuration.c:84 find_file(): found
E:/tmp/_flexperiment/tools//scripts/target/stm32f1x_stlink.cfg
Debug: 42 147 configuration.c:84 find_file(): found
E:/tmp/_flexperiment/tools//scripts/target/stm32_stlink.cfg
Debug: 43 154 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_transport select hla_swd
Debug: 44 162 command.c:145 script_debug(): command - ocd_transport
ocd_transport select hla_swd
Debug: 45 169 hla_transport.c:187 hl_transport_select(): hl_transport_select
Debug: 46 174 command.c:366 register_command_handler(): registering 'ocd_hla'...
Debug: 47 179 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 48 183 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 49 187 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 50 191 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 51 195 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 52 201 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 53 206 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 54 211 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 55 216 command.c:366 register_command_handler(): registering
'ocd_jtag'...
Debug: 56 222 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_hla newtap stm32f1x cpu -expected
-id 0x1ba01477
Debug: 57 229 command.c:145 script_debug(): command - ocd_hla ocd_hla newtap
stm32f1x cpu -expected-id 0x1ba01477
Debug: 58 235 hla_tcl.c:104 jim_hl_newtap_cmd(): Creating New Tap, Chip:
stm32f1x, Tap: cpu, Dotted: stm32f1x.cpu, 2 par
ams
Debug: 59 242 hla_tcl.c:114 jim_hl_newtap_cmd(): Processing option: -expected-id
Debug: 60 249 core.c:1319 jtag_tap_init(): Created Tap: stm32f1x.cpu @ abs
position 0, irlen 0, capture: 0x0 mask: 0x0
Debug: 61 257 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_target create stm32f1x.cpu hla_ta
rget -chain-position stm32f1x.cpu
Debug: 62 267 command.c:145 script_debug(): command - ocd_target ocd_target
create stm32f1x.cpu hla_target -chain-positi
on stm32f1x.cpu
Debug: 63 275 target.c:1722 target_free_all_working_areas_restore(): freeing
all working areas
Debug: 64 280 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 65 284 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 66 289 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 67 294 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 68 298 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 69 302 command.c:366 register_command_handler(): registering 'ocd_arm'...
Debug: 70 306 hla_target.c:367 adapter_target_create(): adapter_target_create
Debug: 71 312 hla_target.c:338 adapter_init_arch_info(): adapter_init_arch_info
Debug: 72 317 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 73 322 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 74 327 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 75 333 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 76 337 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 77 342 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 78 347 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 79 352 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 80 357 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 81 365 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 82 371 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 83 375 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 84 380 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 85 385 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 86 390 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 87 395 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 88 400 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 89 405 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 90 411 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 91 416 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 92 421 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 93 426 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 94 431 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 95 435 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 96 440 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 97 445 command.c:366 register_command_handler(): registering
'ocd_stm32f1x.cpu'...
Debug: 98 450 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu configure -work-area
-phys 0x20000000 -work-area-size 0x1000 -work-area-backup 0
Debug: 99 460 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu configure -work-area-phys 0x2000
0000 -work-area-size 0x1000 -work-area-backup 0
Debug: 100 473 target.c:1722 target_free_all_working_areas_restore(): freeing
all working areas
Debug: 101 478 target.c:1722 target_free_all_working_areas_restore(): freeing
all working areas
Debug: 102 484 target.c:1722 target_free_all_working_areas_restore(): freeing
all working areas
Debug: 103 489 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_flash bank stm32f1x.flash stm32f
1x 0 0 0 0 stm32f1x.cpu
Debug: 104 497 command.c:145 script_debug(): command - ocd_flash ocd_flash bank
stm32f1x.flash stm32f1x 0 0 0 0 stm32f1x
.cpu
Debug: 107 504 command.c:366 register_command_handler(): registering
'ocd_stm32f1x'...
Debug: 108 508 command.c:366 register_command_handler(): registering
'ocd_stm32f1x'...
Debug: 109 513 command.c:366 register_command_handler(): registering
'ocd_stm32f1x'...
Debug: 110 517 command.c:366 register_command_handler(): registering
'ocd_stm32f1x'...
Debug: 111 521 command.c:366 register_command_handler(): registering
'ocd_stm32f1x'...
Debug: 112 527 tcl.c:804 handle_flash_bank_command(): 'stm32f1x' driver usage
field missing
Debug: 113 535 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_reset_config srst_only srst_noga
te connect_assert_srst
Debug: 114 546 command.c:145 script_debug(): command - reset_config
ocd_reset_config srst_only srst_nogate connect_asser
t_srst
User : 116 556 command.c:546 command_print(): srst_only separate srst_nogate
srst_open_drain connect_assert_srst
Debug: 117 565 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_init
Debug: 118 571 command.c:145 script_debug(): command - init ocd_init
Debug: 120 575 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_target init
Debug: 121 580 command.c:145 script_debug(): command - ocd_target ocd_target
init
Debug: 123 585 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_target names
Debug: 124 589 command.c:145 script_debug(): command - ocd_target ocd_target
names
Debug: 125 594 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu cget -event gdb-fla
sh-erase-start
Debug: 126 602 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu cget -event gdb-flash-erase-sta
rt
Debug: 127 609 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu configure -event gd
b-flash-erase-start reset init
Debug: 128 617 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu configure -event gdb-flash-eras
e-start reset init
Debug: 129 625 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu cget -event gdb-fla
sh-write-end
Debug: 130 632 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu cget -event gdb-flash-write-end
Debug: 131 641 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu configure -event gd
b-flash-write-end reset halt
Debug: 132 650 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu configure -event gdb-flash-writ
e-end reset halt
Debug: 133 661 target.c:1285 handle_target_init_command(): Initializing
targets...
Debug: 134 666 hla_target.c:357 adapter_init_target(): adapter_init_target
Debug: 135 670 command.c:366 register_command_handler(): registering
'ocd_target_request'...
Debug: 136 676 command.c:401 register_command(): command 'trace' is already
registered in '<global>' context
Debug: 137 682 command.c:366 register_command_handler(): registering
'ocd_trace'...
Debug: 138 687 command.c:366 register_command_handler(): registering
'ocd_trace'...
Debug: 139 696 command.c:366 register_command_handler(): registering
'ocd_fast_load_image'...
Debug: 140 704 command.c:366 register_command_handler(): registering
'ocd_fast_load'...
Debug: 141 710 command.c:366 register_command_handler(): registering
'ocd_profile'...
Debug: 142 734 command.c:366 register_command_handler(): registering
'ocd_virt2phys'...
Debug: 143 756 command.c:366 register_command_handler(): registering
'ocd_reg'...
Debug: 144 787 command.c:366 register_command_handler(): registering
'ocd_poll'...
Debug: 145 793 command.c:366 register_command_handler(): registering
'ocd_wait_halt'...
Debug: 146 800 command.c:366 register_command_handler(): registering
'ocd_halt'...
Debug: 147 805 command.c:366 register_command_handler(): registering
'ocd_resume'...
Debug: 148 809 command.c:366 register_command_handler(): registering
'ocd_reset'...
Debug: 149 815 command.c:366 register_command_handler(): registering
'ocd_soft_reset_halt'...
Debug: 150 819 command.c:366 register_command_handler(): registering
'ocd_step'...
Debug: 151 823 command.c:366 register_command_handler(): registering
'ocd_mdw'...
Debug: 152 828 command.c:366 register_command_handler(): registering
'ocd_mdh'...
Debug: 153 832 command.c:366 register_command_handler(): registering
'ocd_mdb'...
Debug: 154 837 command.c:366 register_command_handler(): registering
'ocd_mww'...
Debug: 155 841 command.c:366 register_command_handler(): registering
'ocd_mwh'...
Debug: 156 844 command.c:366 register_command_handler(): registering
'ocd_mwb'...
Debug: 157 849 command.c:366 register_command_handler(): registering 'ocd_bp'...
Debug: 158 853 command.c:366 register_command_handler(): registering
'ocd_rbp'...
Debug: 159 860 command.c:366 register_command_handler(): registering 'ocd_wp'...
Debug: 160 867 command.c:366 register_command_handler(): registering
'ocd_rwp'...
Debug: 161 872 command.c:366 register_command_handler(): registering
'ocd_load_image'...
Debug: 162 877 command.c:366 register_command_handler(): registering
'ocd_dump_image'...
Debug: 163 883 command.c:366 register_command_handler(): registering
'ocd_verify_image'...
Debug: 164 889 command.c:366 register_command_handler(): registering
'ocd_test_image'...
Debug: 165 895 command.c:366 register_command_handler(): registering
'ocd_reset_nag'...
Debug: 166 900 command.c:366 register_command_handler(): registering 'ocd_ps'...
Debug: 167 904 command.c:366 register_command_handler(): registering
'ocd_test_mem_access'...
Debug: 168 909 hla_interface.c:108 hl_interface_init(): hl_interface_init
Debug: 169 913 hla_layout.c:85 hl_layout_init(): hl_layout_init
Info : 170 917 core.c:1371 adapter_init(): This adapter doesn't support
configurable speed
Debug: 171 922 openocd.c:132 handle_init_command(): Debug Adapter init complete
Debug: 172 926 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_transport init
Debug: 173 932 command.c:145 script_debug(): command - ocd_transport
ocd_transport init
Debug: 175 936 transport.c:240 handle_transport_init(): handle_transport_init
Debug: 176 940 hla_transport.c:148 hl_transport_init(): hl_transport_init
Debug: 177 944 hla_transport.c:165 hl_transport_init(): current transport
hla_swd
Debug: 178 948 hla_interface.c:44 hl_interface_open(): hl_interface_open
Debug: 179 952 hla_layout.c:42 hl_layout_open(): hl_layout_open
Debug: 180 956 stlink_usb.c:1573 stlink_usb_open(): stlink_usb_open
Debug: 181 961 stlink_usb.c:1588 stlink_usb_open(): transport: 1 vid: 0x0483
pid: 0x3748
Info : 182 989 stlink_usb.c:468 stlink_usb_version(): STLINK v2 JTAG v17 API v2
SWIM v4 VID 0x0483 PID 0x3748
Info : 183 998 stlink_usb.c:1699 stlink_usb_open(): using stlink api v2
Debug: 184 1003 stlink_usb.c:636 stlink_usb_init_mode(): MODE: 0x02
Info : 185 1008 stlink_usb.c:500 stlink_usb_check_voltage(): Target voltage:
3.197889
Debug: 186 1012 stlink_usb.c:691 stlink_usb_init_mode(): MODE: 0x01
Debug: 187 1017 stlink_usb.c:730 stlink_usb_init_mode(): MODE: 0x02
Debug: 188 1022 stlink_usb.c:1738 stlink_usb_open(): Using TAR autoincrement:
4096
Debug: 189 1027 hla_interface.c:129 hl_interface_execute_queue():
hl_interface_execute_queue: ignored
Debug: 190 1032 core.c:713 jtag_add_reset(): SRST line asserted
Debug: 191 1038 core.c:741 jtag_add_reset(): TRST line released
Debug: 192 1042 core.c:321 jtag_call_event_callbacks(): jtag event: TAP reset
Debug: 193 1046 hla_interface.c:69 hl_interface_init_target():
hl_interface_init_target
Debug: 194 1052 stlink_usb.c:755 stlink_usb_idcode(): IDCODE: 0x1BA01477
Debug: 195 1055 openocd.c:145 handle_init_command(): Examining targets...
Debug: 196 1059 target.c:1401 target_call_event_callbacks(): target event 21
(examine-start)
Debug: 197 1068 hla_target.c:766 adapter_read_memory(): adapter_read_memory
0xe000ed00 4 1
Debug: 198 1074 target.c:2064 target_read_u32(): address: 0xe000ed00, value:
0x411fc231
Debug: 199 1078 cortex_m.c:1804 cortex_m_examine(): Cortex-M3 r1p1 processor
detected
Debug: 200 1083 cortex_m.c:1805 cortex_m_examine(): cpuid: 0x411fc231
Debug: 201 1087 hla_target.c:766 adapter_read_memory(): adapter_read_memory
0xe0002000 4 1
Debug: 202 1093 target.c:2064 target_read_u32(): address: 0xe0002000, value:
0x00000260
Debug: 203 1097 target.c:2152 target_write_u32(): address: 0xe0002008, value:
0x00000000
Debug: 204 1102 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0002008 4 1
Debug: 205 1108 target.c:2152 target_write_u32(): address: 0xe000200c, value:
0x00000000
Debug: 206 1112 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe000200c 4 1
Debug: 207 1119 target.c:2152 target_write_u32(): address: 0xe0002010, value:
0x00000000
Debug: 208 1123 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0002010 4 1
Debug: 209 1128 target.c:2152 target_write_u32(): address: 0xe0002014, value:
0x00000000
Debug: 210 1133 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0002014 4 1
Debug: 211 1138 target.c:2152 target_write_u32(): address: 0xe0002018, value:
0x00000000
Debug: 212 1142 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0002018 4 1
Debug: 213 1148 target.c:2152 target_write_u32(): address: 0xe000201c, value:
0x00000000
Debug: 214 1152 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe000201c 4 1
Debug: 215 1157 target.c:2152 target_write_u32(): address: 0xe0002020, value:
0x00000000
Debug: 216 1166 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0002020 4 1
Debug: 217 1173 target.c:2152 target_write_u32(): address: 0xe0002024, value:
0x00000000
Debug: 218 1177 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0002024 4 1
Debug: 219 1183 cortex_m.c:1850 cortex_m_examine(): FPB fpcr 0x260, numcode 6,
numlit 2
Debug: 220 1186 hla_target.c:766 adapter_read_memory(): adapter_read_memory
0xe0001000 4 1
Debug: 221 1192 target.c:2064 target_read_u32(): address: 0xe0001000, value:
0x40000000
Debug: 222 1197 target.c:2152 target_write_u32(): address: 0xe0001028, value:
0x00000000
Debug: 223 1201 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0001028 4 1
Debug: 224 1207 target.c:2152 target_write_u32(): address: 0xe0001038, value:
0x00000000
Debug: 225 1212 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0001038 4 1
Debug: 226 1219 target.c:2152 target_write_u32(): address: 0xe0001048, value:
0x00000000
Debug: 227 1223 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0001048 4 1
Debug: 228 1229 target.c:2152 target_write_u32(): address: 0xe0001058, value:
0x00000000
Debug: 229 1233 hla_target.c:780 adapter_write_memory(): adapter_write_memory
0xe0001058 4 1
Debug: 230 1239 cortex_m.c:1761 cortex_m_dwt_setup(): DWT dwtcr 0x40000000,
comp 4, watch/trigger
Info : 231 1244 cortex_m.c:1859 cortex_m_examine(): stm32f1x.cpu: hardware has
6 breakpoints, 4 watchpoints
Debug: 232 1249 target.c:1401 target_call_event_callbacks(): target event 22
(examine-end)
Debug: 233 1254 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_flash init
Debug: 234 1261 command.c:145 script_debug(): command - ocd_flash ocd_flash init
Debug: 237 1268 tcl.c:870 handle_flash_init_command(): Initializing flash
devices...
Debug: 238 1272 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 239 1276 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 240 1281 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 241 1285 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 242 1290 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 243 1294 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 244 1299 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 245 1303 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 246 1307 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 247 1312 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 248 1316 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 249 1321 command.c:366 register_command_handler(): registering
'ocd_flash'...
Debug: 250 1325 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_mflash init
Debug: 251 1330 command.c:145 script_debug(): command - ocd_mflash ocd_mflash
init
Debug: 253 1335 mflash.c:1379 handle_mflash_init_command(): Initializing mflash
devices...
Debug: 254 1340 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_nand init
Debug: 255 1345 command.c:145 script_debug(): command - ocd_nand ocd_nand init
Debug: 257 1350 tcl.c:497 handle_nand_init_command(): Initializing NAND
devices...
Debug: 258 1354 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_pld init
Debug: 259 1359 command.c:145 script_debug(): command - ocd_pld ocd_pld init
Debug: 261 1366 pld.c:207 handle_pld_init_command(): Initializing PLDs...
Debug: 262 1371 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_reset halt
Debug: 263 1376 command.c:145 script_debug(): command - reset ocd_reset halt
Debug: 265 1380 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_target names
Debug: 266 1385 command.c:145 script_debug(): command - ocd_target ocd_target
names
Debug: 267 1390 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu invoke-event reset
-start
Debug: 268 1397 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu invoke-event reset-start
Debug: 269 1403 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_jtag arp_init-reset
Debug: 270 1408 command.c:145 script_debug(): command - ocd_jtag ocd_jtag
arp_init-reset
Debug: 272 1414 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu cget -chain-positi
on
Debug: 273 1421 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu cget -chain-position
Debug: 274 1427 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_jtag tapisenabled stm32f1x.cpu
Debug: 275 1434 command.c:145 script_debug(): command - ocd_jtag ocd_jtag
tapisenabled stm32f1x.cpu
Debug: 276 1439 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu invoke-event exami
ne-start
Debug: 277 1446 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu invoke-event examine-start
Debug: 278 1452 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu arp_examine
Debug: 279 1459 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu arp_examine
Debug: 280 1468 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu invoke-event exami
ne-end
Debug: 281 1476 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu invoke-event examine-end
Debug: 282 1484 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu invoke-event reset
-assert-pre
Debug: 283 1492 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu invoke-event reset-assert-pre
Debug: 284 1499 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu cget -chain-positi
on
Debug: 285 1505 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu cget -chain-position
Debug: 286 1511 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_jtag tapisenabled stm32f1x.cpu
Debug: 287 1519 command.c:145 script_debug(): command - ocd_jtag ocd_jtag
tapisenabled stm32f1x.cpu
Debug: 288 1524 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu arp_reset assert 1
Debug: 289 1530 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu arp_reset assert 1
Debug: 290 1536 target.c:1722 target_free_all_working_areas_restore(): freeing
all working areas
Debug: 291 1543 hla_target.c:499 adapter_assert_reset(): adapter_assert_reset
Debug: 292 1550 stlink_usb.c:923 stlink_usb_reset(): RESET: 0x00000080
Debug: 293 1553 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu invoke-event reset
-assert-post
Debug: 294 1565 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu invoke-event reset-assert-post
Debug: 295 1573 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu invoke-event reset
-deassert-pre
Debug: 296 1583 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu invoke-event reset-deassert-pr
e
Debug: 297 1593 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu cget -chain-positi
on
Debug: 298 1603 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu cget -chain-position
Debug: 299 1609 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_jtag tapisenabled stm32f1x.cpu
Debug: 300 1616 command.c:145 script_debug(): command - ocd_jtag ocd_jtag
tapisenabled stm32f1x.cpu
Debug: 301 1621 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu arp_reset deassert
1
Debug: 302 1628 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu arp_reset deassert 1
Debug: 303 1634 target.c:1722 target_free_all_working_areas_restore(): freeing
all working areas
Debug: 304 1639 hla_target.c:562 adapter_deassert_reset():
adapter_deassert_reset
Debug: 305 1644 hla_interface.c:129 hl_interface_execute_queue():
hl_interface_execute_queue: ignored
Debug: 306 1650 core.c:717 jtag_add_reset(): SRST line released
Debug: 307 1654 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu invoke-event reset
-deassert-post
Debug: 308 1664 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu invoke-event reset-deassert-po
st
Debug: 309 1673 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu cget -chain-positi
on
Debug: 310 1680 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu cget -chain-position
Debug: 311 1685 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_jtag tapisenabled stm32f1x.cpu
Debug: 312 1692 command.c:145 script_debug(): command - ocd_jtag ocd_jtag
tapisenabled stm32f1x.cpu
Debug: 313 1697 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu arp_waitstate halt
ed 1000
Debug: 314 1704 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu arp_waitstate halted 1000
Debug: 315 1711 target.c:2618 target_wait_state(): waiting for target halted...
Error: 317 2712 target.c:2626 target_wait_state(): timed out while waiting for
target halted
Debug: 318 2718 command.c:145 script_debug(): command - ocd_command ocd_command
type ocd_stm32f1x.cpu curstate
Debug: 319 2724 command.c:145 script_debug(): command - ocd_stm32f1x.cpu
ocd_stm32f1x.cpu curstate
User : 320 2730 command.c:546 command_print(): TARGET: stm32f1x.cpu - Not halted
Debug: 321 2734 command.c:628 run_command(): Command failed with error code -4
User : 322 2738 command.c:666 command_run_line(): in procedure 'reset'
Debug: 323 2742 hla_interface.c:116 hl_interface_quit(): hl_interface_quit
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
