AFAIK the patch below uses libusb, which is available on Windows too. He
just referred in the command's help to the lsusb tool.
Instead of running lsusb -t on Windows you could use the Device manager
-> View -> Devices by connection to see the physical topology of the USB
devices.
Kind regards,
Miklos Marton
2016-02-23 17:01 keltezéssel, Kent Brinkley írta:
> How does this work in the Windows world? lsubs is Linux command.
>
> +@deffn {Config Command} {ftdi_location} <bus>:<port>[,<port>]...
> +Specifies the physical USB port of the adapter to use. The path roots
> +at @var{bus} and walks down the physical ports, with each @var{port}
> +option specifying a deeper level in the bus topology, the last
> +@var{port} denoting where the target adapter is actually plugged.
> +The USB bus topology can be queried with the command @emph{lsusb -t}.
> +@end deffn
> +
> -----Original Message-----
> From: gerrit [mailto:ger...@openocd.org]
> Sent: Tuesday, February 23, 2016 5:44 AM
> To: openocd-devel@lists.sourceforge.net
> Subject: [OpenOCD-devel] [PATCH]: df78257 ftdi: allow selecting device by usb
> bus location
>
> This is an automated email from Gerrit.
>
> Matthias Welwarsky (matth...@welwarsky.de) just uploaded a new patch set to
> Gerrit, which you can find at http://openocd.zylin.com/3351
>
> -- gerrit
>
> commit df782577cf5b5a1da89481ddcbf2a8eda2f949a5
> Author: Matthias Welwarsky <matthias.welwar...@sysgo.com>
> Date: Tue Feb 2 17:03:08 2016 +0100
>
> ftdi: allow selecting device by usb bus location
>
> This patch adds a 'ftdi_location' command to select an adapter by usb
> bus number and port path.
>
> This is helpful if you have a rack full of adapters in a testing or
> manufacturing setup where the only constant is the physical usb bus
> location of the adapter you want to address. Vid:Pid are not unique,
> serial number _may_ be unique (and maybe not with embedded adapters) but
> will change when a new target is plugged.
>
> Specifying a location allows to understand instantly which board failed
> bringup or testing.
>
> Change-Id: I403c7c6c8e34fe42041b3f967db80f3160a4f1a3
> Signed-off-by: Matthias Welwarsky <matthias.welwar...@sysgo.com>
>
> diff --git a/doc/openocd.texi b/doc/openocd.texi index d1f7855..0ab741e 100644
> --- a/doc/openocd.texi
> +++ b/doc/openocd.texi
> @@ -2558,6 +2558,14 @@ If not specified, serial numbers are not considered.
> and are not restricted to containing only decimal digits.) @end deffn
>
> +@deffn {Config Command} {ftdi_location} <bus>:<port>[,<port>]...
> +Specifies the physical USB port of the adapter to use. The path roots
> +at @var{bus} and walks down the physical ports, with each @var{port}
> +option specifying a deeper level in the bus topology, the last
> +@var{port} denoting where the target adapter is actually plugged.
> +The USB bus topology can be queried with the command @emph{lsusb -t}.
> +@end deffn
> +
> @deffn {Config Command} {ftdi_channel} channel Selects the channel of the
> FTDI device to use for MPSSE operations. Most adapters use the default,
> channel 0, but there are exceptions.
> diff --git a/src/jtag/drivers/ftdi.c b/src/jtag/drivers/ftdi.c index
> 7f11391..b32fa6c 100644
> --- a/src/jtag/drivers/ftdi.c
> +++ b/src/jtag/drivers/ftdi.c
> @@ -91,6 +91,7 @@
>
> static char *ftdi_device_desc;
> static char *ftdi_serial;
> +static char *ftdi_location;
> static uint8_t ftdi_channel;
> static uint8_t ftdi_jtag_mode = JTAG_MODE;
>
> @@ -631,7 +632,7 @@ static int ftdi_initialize(void)
>
> for (int i = 0; ftdi_vid[i] || ftdi_pid[i]; i++) {
> mpsse_ctx = mpsse_open(&ftdi_vid[i], &ftdi_pid[i],
> ftdi_device_desc,
> - ftdi_serial, ftdi_channel);
> + ftdi_serial, ftdi_location, ftdi_channel);
> if (mpsse_ctx)
> break;
> }
> @@ -698,6 +699,19 @@ COMMAND_HANDLER(ftdi_handle_serial_command)
> return ERROR_OK;
> }
>
> +COMMAND_HANDLER(ftdi_handle_location_command)
> +{
> + if (CMD_ARGC == 1) {
> + if (ftdi_location)
> + free(ftdi_location);
> + ftdi_location = strdup(CMD_ARGV[0]);
> + } else {
> + return ERROR_COMMAND_SYNTAX_ERROR;
> + }
> +
> + return ERROR_OK;
> +}
> +
> COMMAND_HANDLER(ftdi_handle_channel_command)
> {
> if (CMD_ARGC == 1)
> @@ -876,6 +890,13 @@ static const struct command_registration
> ftdi_command_handlers[] = {
> .usage = "serial_string",
> },
> {
> + .name = "ftdi_location",
> + .handler = &ftdi_handle_location_command,
> + .mode = COMMAND_CONFIG,
> + .help = "set the USB bus location of the FTDI device",
> + .usage = "<bus>:port[,port]...",
> + },
> + {
> .name = "ftdi_channel",
> .handler = &ftdi_handle_channel_command,
> .mode = COMMAND_CONFIG,
> diff --git a/src/jtag/drivers/mpsse.c b/src/jtag/drivers/mpsse.c index
> d9f73a2..a3820a2 100644
> --- a/src/jtag/drivers/mpsse.c
> +++ b/src/jtag/drivers/mpsse.c
> @@ -104,12 +104,65 @@ static bool
> string_descriptor_equal(libusb_device_handle *device, uint8_t str_in
> return strncmp(string, desc_string, sizeof(desc_string)) == 0; }
>
> +static bool device_location_equal(libusb_device *device, const char
> +*location) {
> + char *loc = strdup(location);
> + uint8_t port_path[7];
> + int path_step, path_len;
> + uint8_t dev_bus = libusb_get_bus_number(device);
> + char *ptr;
> + bool result = false;
> +
> + path_len = libusb_get_port_numbers(device, port_path, 7);
> + if (path_len == LIBUSB_ERROR_OVERFLOW) {
> + LOG_ERROR("cannot determine path to usb device! (more than 7
> ports in path)");
> + goto done;
> + }
> +
> + LOG_DEBUG("device path has %i steps", path_len);
> +
> + ptr = strtok(loc, ":");
> + if (ptr == NULL) {
> + LOG_DEBUG("no ':' in path");
> + goto done;
> + }
> + if (atoi(ptr) != dev_bus) {
> + LOG_DEBUG("bus mismatch");
> + goto done;
> + }
> +
> + path_step = 0;
> + while (path_step < 7) {
> + ptr = strtok(NULL, ",");
> + if (ptr == NULL) {
> + LOG_DEBUG("no more tokens in path at step %i",
> path_step);
> + break;
> + }
> +
> + if (path_step < path_len
> + && atoi(ptr) != port_path[path_step]) {
> + LOG_DEBUG("path mismatch at step %i", path_step);
> + break;
> + }
> +
> + path_step++;
> + };
> +
> + /* walked the full path, all elements match */
> + if (path_step == path_len)
> + result = true;
> +
> + done:
> + free(loc);
> + return result;
> +}
> +
> /* Helper to open a libusb device that matches vid, pid, product string
> and/or serial string.
> * Set any field to 0 as a wildcard. If the device is found true is
> returned, with ctx containing
> * the already opened handle. ctx->interface must be set to the desired
> interface (channel) number
> * prior to calling this function. */
> static bool open_matching_device(struct mpsse_ctx *ctx, const uint16_t
> *vid, const uint16_t *pid,
> - const char *product, const char *serial)
> + const char *product, const char *serial, const char *location)
> {
> libusb_device **list;
> struct libusb_device_descriptor desc;
> @@ -141,6 +194,11 @@ static bool open_matching_device(struct mpsse_ctx *ctx,
> const uint16_t *vid, con
> continue;
> }
>
> + if (location && !device_location_equal(device, location)) {
> + libusb_close(ctx->usb_dev);
> + continue;
> + }
> +
> if (product && !string_descriptor_equal(ctx->usb_dev,
> desc.iProduct, product)) {
> libusb_close(ctx->usb_dev);
> continue;
> @@ -263,7 +321,7 @@ error:
> }
>
> struct mpsse_ctx *mpsse_open(const uint16_t *vid, const uint16_t *pid,
> const char *description,
> - const char *serial, int channel)
> + const char *serial, const char *location, int channel)
> {
> struct mpsse_ctx *ctx = calloc(1, sizeof(*ctx));
> int err;
> @@ -292,16 +350,17 @@ struct mpsse_ctx *mpsse_open(const uint16_t *vid, const
> uint16_t *pid, const cha
> goto error;
> }
>
> - if (!open_matching_device(ctx, vid, pid, description, serial)) {
> + if (!open_matching_device(ctx, vid, pid, description, serial,
> +location)) {
> /* Four hex digits plus terminating zero each */
> char vidstr[5];
> char pidstr[5];
> - LOG_ERROR("unable to open ftdi device with vid %s, pid %s,
> description '%s' and "
> - "serial '%s'",
> + LOG_ERROR("unable to open ftdi device with vid %s, pid %s,
> description '%s', "
> + "serial '%s' at bus location '%s'",
> vid ? sprintf(vidstr, "%04x", *vid), vidstr :
> "*",
> pid ? sprintf(pidstr, "%04x", *pid), pidstr :
> "*",
> description ? description : "*",
> - serial ? serial : "*");
> + serial ? serial : "*",
> + location ? location : "*");
> ctx->usb_dev = 0;
> goto error;
> }
> diff --git a/src/jtag/drivers/mpsse.h b/src/jtag/drivers/mpsse.h index
> 3e287f7..4c06bbd 100644
> --- a/src/jtag/drivers/mpsse.h
> +++ b/src/jtag/drivers/mpsse.h
> @@ -43,7 +43,7 @@ struct mpsse_ctx;
>
> /* Device handling */
> struct mpsse_ctx *mpsse_open(const uint16_t *vid, const uint16_t *pid,
> const char *description,
> - const char *serial, int channel);
> + const char *serial, const char *location, int channel);
> void mpsse_close(struct mpsse_ctx *ctx); bool mpsse_is_high_speed(struct
> mpsse_ctx *ctx);
>
>
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
