openocd-devel  

Messages by Thread

• • Re: OpenOCD remote_bitbang protocol issue: SWD and sleep commands are incompatible Jeremy Herbert
  • Re: OpenOCD remote_bitbang protocol issue: SWD and sleep commands are incompatible Jeremy Herbert
• [PATCH]: d76194647d zynq_7000.cfg: Fix issue 'Error: can't read "zynq_pl": no such variable' gerrit
• [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support gerrit
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Rolf | Onethinx
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Paul Fertser
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Paul Fertser
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Rolf | Onethinx
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Rolf | Onethinx
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Paul Fertser
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Rolf | Onethinx
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Paul Fertser
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Rolf | Onethinx
  • Re: [PATCH]: 7f1e8bd108 flash: nor: lpc55xx support Paul Fertser
• [PATCH]: 4fb7bd5a7c checkpatch: allow indentation of 2 TAB in if block gerrit
• [PATCH]: 7032ff8457 jtag: linuxgpiod: drop extra parenthesis gerrit
• [PATCH]: 5c2c91df5d jtag: linuxgpiod: fix detection for line request bias gerrit
• [PATCH]: 51640bb1c2 configure: prevent build of linuxgpiod with libgpiod v2 gerrit
• [PATCH]: ed966dbafb drivers/linuxgpiod: restore duplicated linuxgpiod.c gerrit
• [PATCH]: bc823e6f2c drivers/linuxgpiod: create a copy for libgpiod v2 API gerrit
• [PATCH]: acd26894d3 drivers/linuxgpiodv2: introduce new driver for libgpiod v2 API gerrit
• [PATCH]: 7ef45d3104 target/breakpoints: do not use `*->number` field gerrit
• [PATCH]: 773dde0dfa src/rtos/rtos_nuttx_stackings.c: Fix stack alignment for cortex-m targets gerrit
• [PATCH]: 3222396c74 target/mips32: fix clang sbuild check fail gerrit
• [PATCH]: 93aa83f47d ipdbg: fix double free of virtual-ir data gerrit
• [PATCH]: 432aa59211 target/cortex_m: drop check on defer_examine gerrit
• [PATCH]: 894dae1b54 target: do not reset targets with -defer-examine flag gerrit
• [PATCH]: bc8e001da3 target/hla_target: drop check on defer_examine gerrit
• [openocd:tickets] #428 Query on OpenOCD support for MIMXRT595 board shaheeda shaik
• [PATCH]: 2d038796aa tcl/board: Add support for Terasic DE1-SoC tcl/target: Add support for connecting via the FPGA JTAG chain gerrit
• [openocd:tickets] #427 st-link mini v3 failure, fixed config included Rory Prendergast
• Problem trying to upload code to a ch32v003 board using the arduino IDE Mike How
  • Re: Problem trying to upload code to a ch32v003 board using the arduino IDE Paul Fertser
• [PATCH]: 6e42ed4cb4 flash/nor/nrf5: drop useless for cycle condition gerrit
• [PATCH]: 7fc2abf391 helper/list: include the correct header file gerrit
• [PATCH]: b1c5338d25 helper/list: Replace Linux code with FreeBSD one gerrit
• [openocd:tickets] #426 Wrong flash size for NXP LPC11E68 Andreas Müller
• [openocd:tickets] #425 bug with J-Link debug Hamidou Diallo
• [PATCH]: 83a229f509 helper: add bitfield helper macros gerrit
• [PATCH]: 28089bca20 openocd: dump full command line in the debug log gerrit
• [PATCH]: 2ac367037f target: aarch64: add support for 32 bit MON mode gerrit
• [PATCH]: 921f92a60e src/flash/nor: add support for Nuvoton M0, M23, M4 series. gerrit
• [PATCH]: 7db9332334 target: add warning if memory read/write fail on a non-halted target gerrit
• [PATCH]: 40c8db64e1 gdb_server: add async-notif keep-alive during memory read/write gerrit
• [PATCH]: 114123ab42 gdb_server: drop useless check in gdb_keep_client_alive() gerrit
• [PATCH]: 7d45150a08 gdb_server: fix segfault with GDB command 'flash-erase' gerrit
• [PATCH]: b157c9bb0e mem_ap: fix GDB connections gerrit
• [PATCH]: c25bbdf895 target/esp_xtensa_smp: don't use coreid as an SMP index gerrit
• [PATCH]: f3ce3845d3 pld/intel: small documentation fix. gerrit
• [PATCH]: 6a654e5049 pld/intel: remove idcodes from intel.c gerrit
• [PATCH]: 5504f110e6 pld/intel remove duplicated code gerrit
• [PATCH]: cc5dd46ad8 jtag/drivers/imx_gpio: imx srst/trst on JTAG gerrit
• [PATCH]: 3849b5de59 jtag/drivers/imx_gpio: imx configurable gpio address space size gerrit
• [PATCH]: fc222f639c jtag/drivers/imx_gpio: imx configurable gpio address space size gerrit
• [PATCH]: 46b25ae876 jtag/drivers/imx_gpio: imx configurable gpio address space size gerrit
• [PATCH] helper/log: Fix build warnings using _DEBUG_FREE_SPACE_ Steven J. Hill
• SAM RH707 Support Benoit LIETAER
  • Re: SAM RH707 Support Tommy Murphy
• [PATCH]: d0765fd04e target/arm_adi_v5: do not invalidate DAP cache before dp_init gerrit
• [PATCH]: e7a1fa37bc target/adi_v5_swd: fix DP registers banking gerrit
• [PATCH]: f273214b8a target/adi_v5_swd: make SWD connect DP lockup proof gerrit
• [PATCH]: 4906e59957 target/adi_v5_swd: move setting of do_reconnect one level up gerrit
• [PATCH]: 3f109df2e3 helper/log: add LOG_CUSTOM_LEVEL() macro gerrit
• [PATCH]: f0e8220098 jtag/drivers/bitbang: limit SWD WAIT retries by timeout gerrit
• [PATCH]: 887d47f1fa jtag/drivers/bitbang: use LOG_CUSTOM_LEVEL() macro for SWD gerrit
• [PATCH]: 340915a8f2 armv8: disable reading pauth_dmask/pauth_cmask gerrit
• [PATCH]: 6073d0a54d target/aarch64: enable/disable mmu new commands gerrit
• [PATCH]: 5ff05134ce armv8: do not read ESR_EL3 in AArch32 state gerrit
• Moving riscv-openocd Rafael Sene
• [PATCH]: ce54f02c4f flash/nor/lpc313x-spi: add external SPI NOR flashloader gerrit
• [PATCH]: 8a37d31734 jtag/drivers/imx_gpio: Add srst, trst on imx via the adapter interface. Fix style/format error gerrit
• [PATCH]: e20ba49476 jtag/drivers/imx_gpio: Add srst, trst on imx via the adapter interface. gerrit
• [PATCH]: bec5f63590 jtag/drivers/imx_gpio: add configurable gpio address space size to accommodate other imx chips. Add parenthesis to all macro parameters gerrit
• [PATCH]: 60f201d6f7 jtag/drivers/imx_gpio: add configurable gpio address space size to accommodate other imx chips. Use macros to have consistency with https://review.openocd.org/c/openocd/+/7732 gerrit
• [PATCH]: 3ec7f9fede jtag/drivers/imx_gpio: add configurable gpio address space size to accommodate other imx chips. Fix style/formatting errors gerrit
• [PATCH]: 64bfabe0a7 jtag/drivers/imx_gpio: add configurable gpio address space size to accommodate other imx chips. Instead of checking each GPIO usage for range, only check on init. Using offsets via defines instead of struct to address individual registers gerrit
• [PATCH]: b657229eb9 jtag/drivers/imx_gpio: add configurable gpio address space size to accommodate other imx chips. Fix style/formatting errors gerrit
• [PATCH]: c77a436bea jtag/drivers/imx_gpio: add configurable gpio address space size to accommodate other imx chips. Fix style/formatting errors gerrit
• [PATCH]: cd5456eba2 target/arm_adi_v5: introduce adiv5_jim_configure_ext() gerrit
• [PATCH]: 38061a19aa drivers/cmsis_dap, kitprog: use helper to derive err code from ack gerrit
• [PATCH]: cf79d8ba6d flash/nor/eneispif: support ENE KB1200 ispi flash gerrit
• [PATCH]: a19c12d314 jtag/drivers/imx_gpio: add configurable gpio adddress space size to accommodate other imx chips. Add reset gpio on jtag config gerrit
• [PATCH]: 0dacd1f297 src/jtag/drivers/mpsse: Add support for new FTDI chip types. gerrit
• [openocd:tickets] #424 No support for IPv6 Andre Z.
  • [openocd:tickets] #424 No support for IPv6 Andre Z.
• [PATCH]: 795988ff3f Added configuration for stm8af626 chip gerrit
• [PATCH]: 1182addaa8 tcl/target: Add helpers for booting Xilinx ZynqMP from JTAG gerrit
• [PATCH]: f655343430 jep106: update to revision JEP106BI January 2024 gerrit
• [openocd:tickets] #423 Update for JEP106BI Véronique Allard
  • [openocd:tickets] #423 Update for JEP106BI Antonio Borneo
  • [openocd:tickets] #423 Update for JEP106BI Antonio Borneo
• [PATCH]: a8063107c5 src/target/riscv: add cpuinfo command gerrit
• [openocd:tickets] #422 Modify the FPGA flash status register KooLee
  • [openocd:tickets] #422 Modify the FPGA flash status register Andreas Bolsch
  • [openocd:tickets] Re: #422 Modify the FPGA flash status register KooLee
  • [openocd:tickets] #422 Modify the FPGA flash status register Andreas Bolsch
• [PATCH]: 542254c575 src/helper/options.c: Extend IS_DARWIN guard gerrit
• [PATCH]: de9e12bc3d doc: document 'target create' flags '-dbgbase' and '-coreid' gerrit
• [PATCH]: 55f41b7d8e flash: psoc6: drop incorrect use of 'coreid' gerrit
• [PATCH]: 468204e5e0 helper/log: report target's state in logs gerrit
• [PATCH]: 6802bde3fb jtag/commands: fixed buffer overflow gerrit
• [PATCH]: 6b769dfacc jtag: fix jtag configure command containing events gerrit
• [PATCH]: 241364315c target/xtensa: avoid IHI for writes to non-executable memory gerrit
• Fwd: [libusb] Announcing libusb v1.0.27 Xiaofan Chen
• [PATCH]: 206326e2fa jtag/adapter: retype adapter_gpio_config.{gpio, chip}_num gerrit
• [openocd:tickets] #421 OpenOCD v12 - STLink-v3Minie & STM32 f334 Not Working Taylor Lineman
  • Re: [openocd:tickets] #421 OpenOCD v12 - STLink-v3Minie & STM32 f334 Not Working Tommy Murphy
  • [openocd:tickets] Re: #421 OpenOCD v12 - STLink-v3Minie & STM32 f334 Not Working Tommy Murphy
  • [openocd:tickets] #421 OpenOCD v12 - STLink-v3Minie & STM32 f334 Not Working Collin Kreutzer
  • [openocd:tickets] #421 OpenOCD v12 - STLink-v3Minie & STM32 f334 Not Working KAiSV
  • [openocd:tickets] #421 OpenOCD v12 - STLink-v3Minie & STM32 f334 Not Working KAiSV
  • [openocd:tickets] #421 OpenOCD v12 - STLink-v3Minie & STM32 f334 Not Working Adam Bozanich
• [PATCH]: 42d6e1b964 src/flash/nor/xcf.c: Prefix hexadecimal numbers gerrit
• How to support ADI (Arm Debug Interface) v5 in riscv? 李昊宇
  • Re: How to support ADI (Arm Debug Interface) v5 in riscv? Tommy Murphy
• [PATCH]: 6686f696a7 drivers: jtag_vpi: separate host data from socket buffer gerrit
• [PATCH]: 4545cc2cdb jtag/drivers: fix reset logic handling in OpenJTAG gerrit
• OpenOCD now running on ESP32 with ESP-IDF Erhan Kurubas
• [PATCH]: fb8ea6c4a3 src/target/riscv: Help older compilers gerrit
• [PATCH]: 5fd1d8dd0b target/adi_v5_swd: introduce swd_check_dpidr() gerrit
• [PATCH]: 6d73704848 Revert "break from long loops on shutdown request" gerrit
• [PATCH]: 8ff251367b target/arc: implement basic SMP support gerrit
• [PATCH]: 4ef7715d09 jtag/drivers/jlink: make jlink quiet polling target in -d 3 gerrit
• [PATCH]: fac14c7a94 flash/nor/nrf5: drop nrf5_get_probed_chip_if_halted() gerrit
• [PATCH]: 0afbc7982a flash/nor/nrf5: add basic nRF53 and nRF91 support gerrit
• [PATCH]: 63ff7d49e8 tcl/target: add nRF53 config file gerrit
• [PATCH]: c403cb0d8c flash/nor/nrf5: make flash erase little faster gerrit
• [PATCH]: 1a3e07d7d9 flash/nor/nrf5: handle ERROR_WAIT during nRF53/91 flash erase gerrit
• [PATCH]: 4da7f24d52 flash/nor/nrf5: drop unused part of HWIDs table gerrit
• [PATCH]: b545eb5193 flash/nor/nrf5: drop nrf5 info command gerrit
• [PATCH]: 8782530f30 flash/nor/nrf5: show proper SoC type on newer nRF91 devices gerrit
• [PATCH]: 4b4377390c flash/nor/nrf5: introduce address maps gerrit
• [PATCH]: 8e4c61bf2b flash/nor/nrf5, target/nrf51: deprecate nrf51 flash driver gerrit
• [PATCH]: 030e447358 flash/nor/nrf5: use BIT() instead of << operator gerrit
• [PATCH]: d8050f07a6 flash/nor/nrf5: add missing package codes gerrit
• [PATCH]: 396627db92 target/nrf51: use PAN #16 workaround in reset-init only gerrit
• [PATCH]: ba94380b96 flash/nor/nrf5: add missing device types gerrit
• [PATCH]: d6f4af61b6 jtag/drivers: OpenJTAG standard variant perf improvement gerrit
• [PATCH]: 4ea322005f jtag/drivers: Add vid_pid command to OpenJTAG gerrit
• [PATCH]: e51bd964ee target/cortex_m: prevent asserting reset if examine is deferred gerrit
• [PATCH]: f247f81057 target/cortex_m: fix couple of comments gerrit
• [PATCH]: c0cb3d306a target/cortex_m: drop useless target_halt() call gerrit
• [PATCH]: ea3bdaa392 src/flash/nor:add custom flash gerrit
• [PATCH]: 4910de7389 server/gdb-server:fix type error. gerrit
• [PATCH]: 2530c12b7e jtag/drivers: Correct ANGIE driver and GPIO Extender configuration gerrit
• 回复：Re: erase/write flash error when flash-addr-width > 32bit on windows Aceluffy
• erase/write flash error when flash-addr-width > 32bit on windows Aceluffy
  • Re: erase/write flash error when flash-addr-width > 32bit on windows Antonio Borneo
• [PATCH]: fef7f85385 target/esirisc: free memory at OpenOCD exit gerrit
• [PATCH]: 1d11122e89 target: get_gdb_arch() accepts target via const pointer gerrit
• [PATCH]: d3e17e3013 target: pass target to observers via const pointer gerrit
• [PATCH]: 42c299afad helper/log: report the file in `log_output` command gerrit
• [PATCH]: 4cf97e51cc target: Introduce flush_reg_cache command gerrit
• [PATCH]: 355d64394d drivers/jtag_vpi: Use "packed" struct for jtag_vpi packets gerrit
• Character conflict in the remote-bitbnag protocol Marek Vrbka
  • Re: Character conflict in the remote-bitbnag protocol Tommy Murphy
  • Re: Character conflict in the remote-bitbnag protocol Antonio Borneo
  • Re: Character conflict in the remote-bitbnag protocol Tommy Murphy
  • Re: Character conflict in the remote-bitbnag protocol Antonio Borneo
  • Re: Character conflict in the remote-bitbnag protocol Tommy Murphy
• [openocd:tickets] #418 Reading ROMTABLEs with "dap info" seems to irrecoverably hang the DAP Bill Paul
  • [openocd:tickets] #418 Reading ROMTABLEs with "dap info" seems to irrecoverably hang the DAP Antonio Borneo
  • [openocd:tickets] #418 Reading ROMTABLEs with "dap info" seems to irrecoverably hang the DAP Bill Paul
  • [openocd:tickets] #418 Reading ROMTABLEs with "dap info" seems to irrecoverably hang the DAP Alex
  • [openocd:tickets] #418 Reading ROMTABLEs with "dap info" seems to irrecoverably hang the DAP Antonio Borneo
  • [openocd:tickets] #418 Reading ROMTABLEs with "dap info" seems to irrecoverably hang the DAP Bill Paul
  • [openocd:tickets] #418 Reading ROMTABLEs with "dap info" seems to irrecoverably hang the DAP Alex
• [PATCH]: 545ace3a30 target/adi_v5_jtag: debug register access gerrit
• [PATCH]: 2237c7da1c jtag/vdebug: add support for DAP6 gerrit
• [PATCH]: 6d8135a81e jtag/vdebug: fix socket options on CYGWIN gerrit
• [PATCH]: 8da8e478ae target/mips32: fix false positive from clang gerrit
• [PATCH]: 30117f1c3e LICENSES: drop SPDX tag 'GPL-2.0' and use 'GPL-2.0-only' gerrit
• [PATCH]: 64181d37c8 target/xtensa: add dual-core support gerrit
• [PATCH]: 07e8dba36c target/xtensa: add dual-core support gerrit
• [PATCH]: f70ff37c27 target/xtensa: update COMMAND_HELPER output to use command_print() API gerrit
• [PATCH]: 7f9fc0ee9c target/xtensa: enable xtensa algo support gerrit
• [PATCH]: 55152034d4 flash: nor: add support for Nordic nRF9160 gerrit
• [PATCH]: 6491bb86bd flash: nor: add support for Nordic nRF9160 gerrit
• [openocd:tickets] #215 Add Xilinx XVC support to OpenOCD Antonio Borneo
  • [openocd:tickets] #215 Add Xilinx XVC support to OpenOCD Antonio Borneo
• [PATCH]: db588d06dc doc: `address` is optional in `*_image` commands gerrit
• [PATCH]: e1e8b7ed86 flash/nor/fsl_flexspi: Support arbitrary flash cmd gerrit
• [PATCH]: cc273477de contrib/firmware: Change USB interruption handling for JTAG/I2C communications gerrit
• [PATCH]: f90bcc0e50 drivers/libusb_helper: introduce oocd_libusb_dev_mem_alloc() helper gerrit
• [PATCH]: b5fbaadf15 src/jtag: implemented SRST toggle gerrit
• Ingenic T31 Andrew Walsh
  • Re: Ingenic T31 Oleksij Rempel
  • Re: Ingenic T31 Daniel Glöckner
  • Re: Ingenic T31 Andrew Walsh
• [PATCH]: df1f5d00c6 jtag/drivers: Add GPIO extender configuration function to ANGIE driver gerrit
• [PATCH]: 69e6b4511a jtag/drivers: correct the angie_reset function gerrit
• [PATCH]: f532e04bf6 contrib/firmware: Add direction control for 'SCL' i2c signal gerrit
• [PATCH]: 264bbd7c52 jtag/drivers: send bitstream size to firmware via libusb gerrit
• [PATCH]: 44eceebd81 jtag/drivers: give ANGIE a new VID after renumeration gerrit
• OpenOCD review process? Henrik Nordström
  • Re: OpenOCD review process? Tommy Murphy
  • Sv: OpenOCD review process? Henrik Nordström
• [PATCH]: 49a14e06ac src/flash/nor/psoc6.c update changes gerrit
• [PATCH]: e39ee7f0e7 helper/command: simplify script_command_args_alloc() gerrit
• [PATCH]: b310a99240 helper/command: pass command arguments also as Jim_Obj gerrit

• Earlier messages
• Later messages