Spen - you seem to be the guy who can fix any cortex problem I've had, I
do thank you.
Perhaps you can help explain this.
I have 2 boards - as I said earlier.
#1 has stm32f103vbt6 z 22 dav 93 mlt 22 746 - 128K flash part.
board stm32f10x-128k-eval
#2 has stm32f103zet6 22089vc mlt 3r816 - 512k flash part.
board stm3210e-eval
If I "mon reset" #1 - all things seem correct, I end up @ the reset vector.
Same if I flash the board with "load" from gdb.
Board #2 is different.
Reset - does something - but - the CPU ends up in the wrong place.
To the best of my knowledge there is no jumper on the board that would
make it happen differently.
Exact same configuration - remove & replace the board - same config file,
same everything - board does not reset correctly (In fact I am using the
one you sent me)
I am using SVN version Revision: 819
-Duane.
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
