Now that I'm able to easily build with libftdi and libftd2xx, I tried libftd2xx (libftd2xx0.4.16.tar.gz), too.
While libftdi works fine, with libftd2xx I get: -- cut -- ... Debug: 58 3 ft2232.c:1412 ft2232_init_ftd2xx(): 'ft2232' interface using FTD2XX with 'flyswatter' layout (0403:6010) Error: 59 4 ft2232.c:1455 ft2232_init_ftd2xx(): unable to open ftdi device: 2 Error: 60 11 ft2232.c:1470 ft2232_init_ftd2xx(): ListDevices: 0 -- cut -- Any idea what might be wrong here? Just in case somebody has a better idea than "use open source an no binary driver" ;) Thanks Dirk P.S.: This is with recent SVN 1293. Working libftdi output: Debug: 58 3 ft2232.c:1537 ft2232_init_libftdi(): 'ft2232' interface using libftdi with 'flyswatter' layout (0403:6010) Debug: 59 23 ft2232.c:1579 ft2232_init_libftdi(): current latency timer: 2 Debug: 60 24 ft2232.c:1981 flyswatter_init(): 80 18 fb Debug: 61 25 ft2232.c:2004 flyswatter_init(): 82 08 0c Debug: 62 26 ft2232.c:259 ft2232_speed(): 86 01 00 Debug: 63 30 openocd.c:158 handle_init_command(): jtag interface init complete _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development