Rick Altherr wrote: > > On May 10, 2009, at 11:43 PM, Laurent Gauch wrote: > >> Hi all BeagleBoard + OpenOCD users, >> >> What is the setup for Emu0 Emu1 pin : >> - need both left open >> - need both EMU0 EMU1 pull-down resistors >> - need EMU0 pull-down resistors ... ... > My recollection of this was that due to a bug in the hardware, the > ICEPICK starts up with only itself in the chain. Thus, the positions of > EMUx don't really matter.
I'm not aware of this bug (what doesn't mean anything ;) ), but never really tried it. My understanding is that they should be both high (?). Maybe the following links can help you: http://elinux.org/OMAP3530_ICEPICK#ICEPICK_infos https://community.ti.com/forums/p/4739/17566.aspx Best regards Dirk _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
