Stephan, This is due to the bug in the Jlink driver I reported earlier! The stableclocks JTAG command is not implemented in the Jlink driver. This can be fixed by copy & pasting some code from another driver.
Nico Coesel -----Oorspronkelijk bericht----- Van: openocd-development-boun...@lists.berlios.de namens Stephan Winokur Verzonden: zo 8/9/09 00:44 Aan: openocd-development@lists.berlios.de Onderwerp: [Openocd-development] Jlink & MIPS CPU issue Hi there, I'm trying to use a v7 Jlink board with a MIPS based board. I'm seeing an error message when I try to halt it, as shown below. (The board does seem to halt, based on activity stopping on the serial port, but at that point openocd has already exited.) thanks! Debug: 106 9467 target.c:1955 handle_halt_command(): - Debug: 107 9467 mips_m4k.c:223 mips_m4k_halt(): target->state: running Debug: 108 9549 mips_ejtag.c:198 mips_ejtag_enter_debug(): ejtag_ctrl: 0x4004c008 Error: 109 9819 jlink.c:232 jlink_execute_command(): BUG: unknown JTAG command type encountered
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
