i tried several versions of openocd, incl. latest from git. serveral machines (x86 & amd64), as well as different usb cables ..
I am out of ideas and any hint ist appreciated:
sudo ./src/openocd -f /usr/local/share/openocd/scripts/board/openrd.cfg
-s /usr/local/share/openocd/scripts/ -c init -c openrd_reflash_uboot
the "nand probe 0" is always getting an uknown NAND flash device ..
if more debug output is neccessary let me know!
kind regards,
phaidros
Open On-Chip Debugger 0.4.0-dev-00465-g9b1f981 (2009-11-19-13:25)
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
3000 kHz
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
jtag_nsrst_delay: 200
jtag_ntrst_delay: 200
dcc downloads are enabled
Warn : use 'feroceon.cpu' as target identifier, not '0'
Info : clock speed 3000 kHz
Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3 (mfg: 0x1e9,
part: 0x0a02, ver: 0x2)
Info : Embedded ICE version 0
target state: halted
target halted in ARM state due to debug-request, current mode: Undefined
cpsr: 0x2000009b pc: 0xffffec6c
MMU: disabled, D-Cache: disabled, I-Cache: disabled
0 0 1 0: 00052078
Error: unknown NAND flash device found, manufacturer id: 0x00 device id:
0x00
probing failed for NAND flash device
Floating point exception
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
