Edgar Grimberg wrote: > Hi, > > The information presented by flash info about the protection status > points to something faulty. My target is a HITEX STR710 evalboard. > I am using v0.4.0-rc1-154-g3172be8 . The configuration script is the > default one from target/str710.cfg > This is the test case: > >> flash protect_check 0 > successfully checked protect state >> flash info 0 > #0 : str7x at 0x40000000, size 0x00040000, buswidth 0, chipwidth 0 > # 0: 0x00000000 (0x2000 8kB) protected > # 1: 0x00002000 (0x2000 8kB) protected > # 2: 0x00004000 (0x2000 8kB) protected > # 3: 0x00006000 (0x2000 8kB) protected > # 4: 0x00008000 (0x8000 32kB) protected > # 5: 0x00010000 (0x10000 64kB) protected > # 6: 0x00020000 (0x10000 64kB) protected > # 7: 0x00030000 (0x10000 64kB) protected > str7x flash driver info >> flash protect 0 0 last off > cleared protection for sectors 0 through 7 on flash bank 0 >> flash protect_check 0 > successfully checked protect state >> flash info 0 > #0 : str7x at 0x40000000, size 0x00040000, buswidth 0, chipwidth 0 > # 0: 0x00000000 (0x2000 8kB) protected > # 1: 0x00002000 (0x2000 8kB) protected > # 2: 0x00004000 (0x2000 8kB) protected > # 3: 0x00006000 (0x2000 8kB) protected > # 4: 0x00008000 (0x8000 32kB) protected > # 5: 0x00010000 (0x10000 64kB) protected > # 6: 0x00020000 (0x10000 64kB) protected > # 7: 0x00030000 (0x10000 64kB) protected > str7x flash driver info > > At the last flash info 0 command I would have expected to get > "unprotected" for all the sectors.
Could you provide a full debug log? I have done a check here and its working for me. Cheers Spen _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development