On Thursday 30 December 2010 08:41:12 Øyvind Harboe wrote: > >> oyv...@titan:~/workspace/openocd$ openocd -c "interface ZY1000; > >> zy1000_server 127.0.0.1;jtag_khz 50" -f board/am3517evm.cfg > >> Open On-Chip Debugger 0.5.0-dev-00682-g0136977 (2010-12-30-08:23) > >> Licensed under GNU GPL v2 > >> For bug reports, read > >> http://openocd.berlios.de/doc/doxygen/bugs.html > >> Warn : Adapter driver 'ZY1000' did not declare which transports it > >> allows; assuming legacy JTAG-only > >> Info : only one transport option; autoselect 'jtag' > >> 50 kHz > >> 10 kHz > >> trst_only separate trst_push_pull > >> jtag_speed 6000 => JTAG clk=10 kHz > >> Info : clock speed 10 kHz > >> Info : JTAG tap: am35x.jrc tap/device found: 0x0b7ae02f (mfg: 0x017, > >> part: 0xb7ae, ver: 0x0) > >> Info : JTAG tap: am35x.dap enabled > >> Info : am35x.cpu: hardware has 6 breakpoints, 2 watchpoints > >> Error: JTAG-DP STICKY ERROR > >> Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140 > >> Error: JTAG-DP STICKY ERROR > >> Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140 > >> Error: JTAG-DP STICKY ERROR > >> Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140 > >> Error: JTAG-DP STICKY ERROR > > > > These errors here, right ... need to investigate. Any pointers possibly ? > > Sorry no. > > Fire up the debugger on OpenOCD and see what turns up? > > Try an older version of OpenOCD to see if it is a regression?
This stuff was there ever since I believe. I might dig in later ... I hope it's still connected ? :) _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
