Hi,
I've been working on Rodrigo on adding support to flash Freescale dsp56800e
devices and have been looking at the dsp563xx code. I think the define for the
JTAG CLAMP instruction in dsp563xx_once.c is incorrect. It should be 0x05
according the Freescale AN2074 (and is also 0x05 in the dsp568xx according to
AN1935). It won't actually change anything in OpenOCD since this define is not
used anywhere (as far as I can tell).
The patch below fixes this.
Phil
---
src/target/dsp563xx_once.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/target/dsp563xx_once.c b/src/target/dsp563xx_once.c
index b7443fa..1d04e89 100644
--- a/src/target/dsp563xx_once.c
+++ b/src/target/dsp563xx_once.c
@@ -37,8 +37,8 @@
#define JTAG_INSTR_EXTEST 0x00
#define JTAG_INSTR_SAMPLE_PRELOAD 0x01
#define JTAG_INSTR_IDCODE 0x02
-#define JTAG_INSTR_CLAMP 0x03
#define JTAG_INSTR_HIZ 0x04
+#define JTAG_INSTR_CLAMP 0x05
#define JTAG_INSTR_ENABLE_ONCE 0x06
#define JTAG_INSTR_DEBUG_REQUEST 0x07
#define JTAG_INSTR_BYPASS 0x0F
--
1.7.0.4
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
