On Mon, Apr 4, 2011 at 2:51 PM, Drasko DRASKOVIC <drasko.drasko...@gmail.com> wrote: > Hi all, > here is a set of patched (separeted by the logical changes they > introduce) that : > 1) Correct endianess for big endian targets > 2) Correct while(1) loop waiting for PrAcc to be "1" > 3) Change FASTDATA operation, forcing the shift out to prevent "ft2232 > buffer size reached" errors > 4) Add optimizations similar to ones introduced by Øyvind recently > > With these patches I was able to obtain decent performances and > correct functioning for my big endian MIPS-M14Kc based target. > > I see no more problems with libftdi of type : > Error: couldn't read enough bytes from FT2232 device (0 < 5) > Current stable version of libftdi can be used, no need for closed D2XX > files nor for development branches of libusb-1.0 > > I also have no more problems with GDB synchronisation - ELF can be > correctly downloaded and executed from GDB. > > Best regards, > Drasko >
Hi Drasko, I reverted the patches I used previously and applied your 4 patches but load_image is now much slower: Debug: 132 223732 command.c:151 script_debug(): command - ocd_command ocd_command type ocd_halt Debug: 133 223732 command.c:151 script_debug(): command - halt ocd_halt Debug: 135 223738 target.c:2196 handle_halt_command(): - Debug: 136 223738 mips_m4k.c:182 mips_m4k_halt(): target->state: running Debug: 137 223746 mips_ejtag.c:239 mips_ejtag_enter_debug(): ejtag_ctrl: 0x4004c008 Debug: 141 225374 mips_m4k.c:109 mips_m4k_debug_entry(): entered debug state at PC 0x83fe4128, target->state: halted Debug: 142 225374 target.c:1053 target_call_event_callbacks(): target event 2 (gdb-halt) Debug: 143 225374 target.c:1053 target_call_event_callbacks(): target event 3 (halted) User : 144 225374 target.c:1330 target_arch_state(): target state: halted User : 145 225374 mips32.c:259 mips32_arch_state(): target halted in MIPS32 mode due to debug-request, pc: 0x83fe4128 Debug: 146 227896 command.c:151 script_debug(): command - ocd_command ocd_command type ocd_load_image u-boot.bin.new 0xa0400000 Debug: 147 227897 command.c:151 script_debug(): command - load_image ocd_load_image u-boot.bin.new 0xa0400000 Debug: 149 227903 configuration.c:87 find_file(): found u-boot.bin.new Debug: 150 227903 configuration.c:87 find_file(): found u-boot.bin.new Debug: 151 227904 target.c:1346 target_write_buffer(): writing buffer of 109628 byte at 0xa0400000 Debug: 152 227904 mips_m4k.c:1037 mips_m4k_bulk_write_memory(): address: 0xa0400000, count: 0x00006b0f Debug: 153 227904 target.c:1157 target_alloc_working_area_try(): MMU disabled, using physical address for working memory 0xa0010000 Debug: 154 227904 target.c:1217 target_alloc_working_area_try(): allocated new working area at address 0xa0010000 Debug: 158 229698 mips32_pracc.c:1018 mips32_pracc_fastdata_xfer(): mips32_pracc_fastdata_xfer using 0xa0010000 for write handler Debug: 159 284584 log.c:437 keep_alive(): keep_alive() was not invoked in the 1000ms timelimit (55226). This may cause trouble with GDB connections. User : 161 284588 command.c:557 command_print(): 109628 bytes written at address 0xa0400000 User : 162 284588 command.c:557 command_print(): downloaded 109628 bytes in 56.685356s (1.889 KiB/s) Compared to the version I was using previously which just had the two patches for endianness: Debug: 100 50064 command.c:151 script_debug(): command - ocd_command ocd_command type ocd_halt Debug: 101 50065 command.c:151 script_debug(): command - halt ocd_halt Debug: 103 50071 target.c:2196 handle_halt_command(): - Debug: 104 50071 mips_m4k.c:178 mips_m4k_halt(): target->state: running Debug: 105 50079 mips_ejtag.c:218 mips_ejtag_enter_debug(): ejtag_ctrl: 0x4004c008 Debug: 111 52855 mips_m4k.c:109 mips_m4k_debug_entry(): entered debug state at PC 0x83fe4128, target->state: halted Debug: 112 52855 target.c:1053 target_call_event_callbacks(): target event 2 (gdb-halt) Debug: 113 52855 target.c:1053 target_call_event_callbacks(): target event 3 (halted) User : 114 52855 target.c:1330 target_arch_state(): target state: halted User : 115 52855 mips32.c:259 mips32_arch_state(): target halted in MIPS32 mode due to debug-request, pc: 0x83fe4128 Debug: 116 54993 command.c:151 script_debug(): command - ocd_command ocd_command type ocd_load_image u-boot.bin.new 0xa0400000 Debug: 117 54993 command.c:151 script_debug(): command - load_image ocd_load_image u-boot.bin.new 0xa0400000 Debug: 119 54999 configuration.c:87 find_file(): found u-boot.bin.new Debug: 120 54999 configuration.c:87 find_file(): found u-boot.bin.new Debug: 121 55000 target.c:1346 target_write_buffer(): writing buffer of 109628 byte at 0xa0400000 Debug: 122 55000 mips_m4k.c:1016 mips_m4k_bulk_write_memory(): address: 0xa0400000, count: 0x00006b0f Debug: 123 55000 target.c:1157 target_alloc_working_area_try(): MMU disabled, using physical address for working memory 0xa0010000 Debug: 124 55000 target.c:1217 target_alloc_working_area_try(): allocated new working area at address 0xa0010000 Debug: 131 58210 mips32_pracc.c:995 mips32_pracc_fastdata_xfer(): mips32_pracc_fastdata_xfer using 0xa0010000 for write handler Debug: 133 58513 ft2232.c:1959 ft2232_execute_scan(): ft2232 buffer size reached, sending queued commands (first_unsent: 0xb74db008, cmd: 0xb73e1fe8) Debug: 134 58781 ft2232.c:1959 ft2232_execute_scan(): ft2232 buffer size reached, sending queued commands (first_unsent: 0xb73e1fe8, cmd: 0xb72e8fac) Debug: 135 59049 ft2232.c:1959 ft2232_execute_scan(): ft2232 buffer size reached, sending queued commands (first_unsent: 0xb72e8fac, cmd: 0xb71eff28) User : 137 59354 command.c:557 command_print(): 109628 bytes written at address 0xa0400000 User : 138 59354 command.c:557 command_print(): downloaded 109628 bytes in 4.355341s (24.581 KiB/s) Andy _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
