On 20:30 Tue 10 May , Rogan Dawes wrote: > Hi folks, > > I have a clone JLink adapter, that was working fine with OpenOCD (apart > from my not being able to access the flash at the time). > > I decided to try it with the JLink software, and it upgraded the > firmware. Every since, I have been unable to use it with OpenOCD. > > My config file is available here: > > http://dawes.za.net/rogan/dns323.cfg > > I invoke it as: > > openocd -d3 -l jlink.log -f interface/jlink.cfg -f dns323.cfg -s "mdw > 0xffff0000 0x10; sleep 100; shutdown" > > (Just to get it to do something, then exit as soon as possible). > > The log is available at: > > http://dawes.za.net/rogan/jlink_201105102028.log > > The main problem appears to be these lines: > > Error: 294 300 jlink.c:1541 jlink_usb_message(): jlink_usb_message > failed with result=255) > Error: 295 300 jlink.c:1367 jlink_tap_execute(): jlink_tap_execute, > wrong result -107 (expected 1) which version of openocd do you use and which jlink version?
Best Regards, J. _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
