On 9 August 2011 12:52, Vit Mares <mares....@gmail.com> wrote: > Attempt to build 0.5.0 with MinGW on Windows XP failed when running configure. > Release 0.4.0 configured and built without problems. > .... > config.status: creating src/pld/Makefile > config.status: creating doc/Makefile > config.status: creating config.h > config.status: config.h is unchanged > config.status: executing depfiles commands > config.status: executing libtool commands > === configuring in jimtcl (/home/maresv/openocd-0.5.0/jimtcl) > configure: running /bin/sh ./configure.gnu --disable-option-checking > '--prefix=/home/maresv/openocd_dist_050' '--enable > -parport' '--enable-parport-giveio' '--enable-ft2232_ftd2xx' > '--with-ftd2xx-win32-zipdir=/home/maresv/drivers_ftdi' --ca > che-file=/dev/null --srcdir=. > The system cannot find the path specified. > autosetup/system.tcl:150: Error: > in procedure 'use' called at file "auto.def", line 5 > in procedure 'use' called at file "autosetup/cc.tcl", line 29 > in procedure 'config_guess' called at file "autosetup/system.tcl", line 150 > Try: 'configure --debug' for a full stack trace > configure: error: ./configure.gnu failed for jimtcl > > Best regards > Vit Mares >
As far as i am aware jimtcl does not support building under msys. I have tested building win32/64 native binaries under cygwin and linux - both these are working. Cheers Spen _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development