After updating to GDB 7.3 from 7.2, I can no longer connect to openocd
(git version from couple of days ago). The target is a Cortex-M3
STM32F207, and I start openocd using:
openocd -f interface/jlink.cfg -f target/stm32f2x.cfg
The output from GDB looks like this:
arm-none-eabi-gdb -n bootflasher.elf
GNU gdb (GDB) 7.3
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "--host=x86_64-unknown-linux-gnu
--target=arm-none-eabi".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from prog.elf...done.
(gdb) target remote localhost:3333
Remote debugging using localhost:3333
Remote 'g' packet reply is too long:
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
/Tobias
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
