Matt Hsu <matt@...> writes: > > Hi all,I tried to use AM3517evm's config on AM3517 Craneboard. But it seems that no luck to get openOCD work.sudo openocd -f interface/flyswatter.cfg -f board/am3517evm.cfgOpen On-Chip Debugger 0.5.0 (2011-08-31-15:54) > Licensed under GNU GPL v2For bug reports, read http://openocd.berlios.de/doc/doxygen/bugs.htmlInfo : only one transport option; autoselect 'jtag' > 10 kHztrst_only separate trst_push_pullInfo : clock speed 10 kHzInfo : JTAG tap: am35x.jrc tap/device found: 0x0b86802f (mfg: 0x017, part: 0xb868, ver: 0x0)Warn : JTAG tap: am35x.jrc UNEXPECTED: 0x0b86802f (mfg: 0x017, part: 0xb868, ver: 0x0) > Error: JTAG tap: am35x.jrc expected 1 of 1: 0x0b7ae02f (mfg: 0x017, part: 0xb7ae, ver: 0x0)Error: Trying to use configured scan chain anyway...Warn : Bypassing JTAG setup events due to errors > I'm curious that anyone try to get openOCD work on craneboard?Thanks,-- - Matt
I have an embedded board which behaves similarly... also, Øyvind started out about the same way with an AM3517 board, see for example http://lists.berlios.de/pipermail/openocd-development/2010-June/015867.html > Info : JTAG tap: am3517.jrc tap/device found: 0x0b86802f (mfg: 0x017, part: 0xb868, ver: 0x0) But that ID doesn't exist in the cfg files later checked into openocd. I'm not quite sure how he got from point A to point B ... :) _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
