yes and it works. And I even rebuild OpenPKG with a gcc 3.4.4 located in /usr/local
2005/7/13, Doug Summers <[EMAIL PROTECTED]>: > Henri Gomez wrote: > > got the same on AIX 5.2 (PASE). > > > > problem for me also > > > > 2005/7/12, Doug Summers <[EMAIL PROTECTED]>: > > > >>Doug Summers wrote: > >> > >>>Doug Summers wrote: > >>> > >>> > >>>>Doug Summers wrote: > >>>> > >>>> > >>>>>Got the same results using the 2.4.1 code... > >>>>> > >>>>>+ /tmp/rpm -bb openpkg.spec > >>>>>Executing(%prep): /bin/sh -e /tmp/rpm-tmp.8866 > >>>>>/tmp/rpm-tmp.8866[8]: LOGNAME: This variable is read only. > >>>>>error: Bad exit status from /tmp/rpm-tmp.8866 (%prep) > >>>>> > >>>>> > >>>>>RPM build errors: > >>>>> Bad exit status from /tmp/rpm-tmp.8866 (%prep) > >>>>>+ echo ++ overwriting RPM installation by installing via RPM itself > >>>>>++ overwriting RPM installation by installing via RPM itself > >>>>>+ /tmp/rpm --install --justdb --force --noscripts --notriggers > >>>>>--ignoresize /tmp/openpkg-20050706-root/openpkg/RPM/PKG/openpkg-*.rpm > >>>>>error: File not found by glob: > >>>>>/tmp/openpkg-20050706-root/openpkg/RPM/PKG/openpkg-*.rpm > >>>>> > >>>>>The bootstrap creates successfully but the rpm doesn't. When I > >>>>>install it the command "openpkg rpm -qa" is empty. > >>>>>______________________________________________________________________ > >>>>>The OpenPKG Project www.openpkg.org > >>>>>User Communication List openpkg-users@openpkg.org > >>>> > >>>> > >>>> > >>>>This is stopping my testing of 2.4 on AIX. Without the OpenPKG RPM > >>>>being created I can't make any new ones due to their dependency of > >>>>OpenPKG. I'm running my initial bootstrap as root - is this the > >>>>problem? None of this happened on the 2.3 sources after the > >>>>compilation problems of RPM were fixed. > >>>>______________________________________________________________________ > >>>>The OpenPKG Project www.openpkg.org > >>>>User Communication List openpkg-users@openpkg.org > >>> > >>> > >>>OK - got past this problem (commented out 'readonly LOGNAME' entry in > >>>/etc/profile). Got make, m4, & binutils to compile (using GCC from IBM > >>>AIX Toolbox). Now I'm stuck (again) compiling GCC: > >>> > >>>./xgcc -B./ -B/openpkg/powerpc-ibm-aix5.1.0.0/bin/ -isystem > >>>/openpkg/powerpc-ibm-aix5.1.0.0/include -isystem > >>>/openpkg/powerpc-ibm-aix5.1.0.0/sys-include > >>>-L/openpkg/RPM/TMP/gcc-3.4.4/obj/gcc/../ld -O2 -DIN_GCC -W -Wall > >>>-Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes > >>>-Wold-style-definition -isystem ./include -g -DHAVE_GTHR_DEFAULT > >>>-DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -I. -I. > >>>-I/openpkg/RPM/TMP/gcc-3.4.4/obj/../gcc > >>>-I/openpkg/RPM/TMP/gcc-3.4.4/obj/../gcc/. > >>>-I/openpkg/RPM/TMP/gcc-3.4.4/obj/../gcc/../include -mcpu=power > >>>-DL_divdi3 -c /openpkg/RPM/TMP/gcc-3.4.4/obj/../gcc/libgcc2.c > >>>-fexceptions -fnon-call-exceptions -o libgcc/power/_divdi3.o > >>>/openpkg/RPM/TMP/ccWC0LQ2.s: Assembler messages: > >>>/openpkg/RPM/TMP/ccWC0LQ2.s:845: Error: Unrecognized opcode: `mfcr' > >>>make[3]: *** [libgcc/power/_divdi3.o] Error 1 > >>> > >>>My next step is to uninstall binutils (OpenPKG version) and try again > >>>using '--define="with_binutils no"'. > >>>______________________________________________________________________ > >>>The OpenPKG Project www.openpkg.org > >>>User Communication List openpkg-users@openpkg.org > >> > >>After 3.5 hours my attempts to compile GCC have failed: > >> > >>+ subdir=pthread/power > >>+ '[' .pthread/power = .. ']' > >>+ mv '/openpkg/RPM/TMP/gcc-3.4.4-root/openpkg/lib/pthread/power/lib*.a' > >>/openpkg/RPM/TMP/gcc-3.4.4-root/openpkg/lib/gcc/powerpc-ibm-aix5.1.0.0/3.4.4/pthread/power/ > >>mv: cannot rename > >>/openpkg/RPM/TMP/gcc-3.4.4-root/openpkg/lib/pthread/power/lib*.a to > >>/openpkg/RPM/TMP/gcc-3.4.4-root/openpkg/lib/gcc/powerpc-ibm-aix5.1.0.0/3.4.4/pthread/power//lib*.a: > >> > >>No such file or directory > >>error: Bad exit status from /openpkg/RPM/TMP/rpm-tmp.14260 (%install) > >> > >>I got past the other errors by uninstalling binutils and using > >>--define="with_binutils no". Anyone have any other suggestions??? > >>______________________________________________________________________ > >>The OpenPKG Project www.openpkg.org > >>User Communication List openpkg-users@openpkg.org > >> > > > > ______________________________________________________________________ > > The OpenPKG Project www.openpkg.org > > User Communication List openpkg-users@openpkg.org > > I'm trying a straight compile of the GCC 3.4.4 source on AIX to see if > it dies in the same spot. So far so good (5 hours later, $^$% machine is > way too slow) - have you tried to compile GCC outside of OpenPKG? > ______________________________________________________________________ > The OpenPKG Project www.openpkg.org > User Communication List openpkg-users@openpkg.org > ______________________________________________________________________ The OpenPKG Project www.openpkg.org User Communication List openpkg-users@openpkg.org