- **status**: unassigned --> wontfix
- **Comment**:
No configuration is needed in SMF. The NBC behaviour is trigged when AMF sends
a state change notification with SA_AMF_MAINTENANCE_CAMPAIGN_DN set in
additional info. This togeteher with not doing a repair on a failing unit is a
NBC behaviour in AMF. A fix is done in AMF adding a new configuration that has
to be set to activate the behaviour according to [#2144]. For more information
about the AMF fix see [#2435]
---
** [tickets:#2419] smf: when fixing ticket #2145 a NBC problem was introduced**
**Status:** wontfix
**Milestone:** 5.2.0
**Created:** Mon Apr 10, 2017 11:11 AM UTC by elunlen
**Last Updated:** Thu Apr 13, 2017 08:41 AM UTC
**Owner:** nobody
Previous behavior:
The behavior was to ignore a fail to activate a component unless any secondary
fault happened. This means that it was for example possible to complete a
campaign even if a component failed to start and fix this problem after
committing. No action to resume the campaign was needed.
After [#2145]:
The campaign will always suspend in case of component fail and a resume must be
requested for the campaign to continue.
NBC:
The behavior has changed in such a way that it must be seen as a NBC. The #2145
ticket corrects SMF behavior regarding AIS but is still NBC since the previous
behavior is the legacy behavior in previous releases.
Proposal 1; Fix if not needed to change setting in runtime e.g. during an
upgrade
Add a new configuration attribute to the SMF configuration class that makes it
possible to select whether the behavior after #2145 shall be used or not. The
default setting must be the previous behavior.
The setting must have the following properties:
- If the attribute does not exist (old model) legacy behavior
- If the attribute value is not changed from default legacy behavior
- If the attribute value is <empty> or invalid legacy behavior
- If the attribute value is a valid “ON” setting new behavior
- A request to change the attribute in runtime shall always be rejected
Proposal 2; Fix if change has to be made during upgrade:
Add a new configuration attribute to the SMF configuration class that makes it
possible to select whether the behavior after #2145 shall be used or not. The
default setting must be the previous behavior.
The setting must have the following properties:
- If the attribute does not exist (old model) legacy behavior
- If the attribute value is not changed from default legacy behavior
- If the attribute value is <empty> or invalid legacy behavior
- If the attribute value is a valid “ON” setting new behavior
- Attribute value must be possible to change in runtime in “idle” state (no
campaign is executing)
- Attribute value must be possible to change in runtime in campaign init state.
Note that if changed here
the new setting must be used in the rest of the campaign
---
Sent from sourceforge.net because opensaf-tickets@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/opensaf/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/opensaf/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Opensaf-tickets mailing list
Opensaf-tickets@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/opensaf-tickets