Biswajit, If you are uinsg TIPC , Ignore all our comments releated to Firewall & Broadcast .
-AVM On 7/16/2013 1:43 PM, Biswajit Panigrahi wrote: > Hi Surya, > Thanks a lot for your input. > > Regards, > Biswajit Panigrahi > Department : Product Engg. > 9/7 Hosur Road,bangalore-560029, INDIA > / Office: +918040243000|extn:3418 > Mobile: + 91 9916674401 > Email: [email protected] > > > Connect with us: > > www.techmahindra.com > > > > -----Original Message----- > From: Suryanarayana Garlapati [mailto:[email protected]] > Sent: Tuesday, July 16, 2013 1:24 PM > To: Biswajit Panigrahi > Cc: [email protected]; [email protected]; > [email protected] > Subject: Re: [users] Problem with Active standby > > If you are using TIPC, then it is a requirement to have both the nodes > in the same subnet, infact all the cluster nodes should be in the same > subnet. > > On Tuesday 16 July 2013 01:07 PM, Biswajit Panigrahi wrote: >> Hi; >> I have disabled the Firewall and tried. But still both the controllers >> are in ACTIVE state. >> Currently I am using TIPC Protocol. So if both the pcs are in different >> subnet then is there any configuration for that. >> OR making the controllers to same subnet is only the way ? >> IP FOR CONTROLLER1-10.19.137.110 >> IP FOR CONTROLLER2-10.19.135.159 >> >> Regards, >> Biswajit >> >> >> >> -----Original Message----- >> From: Suryanarayana Garlapati >> [mailto:[email protected]] >> Sent: Tuesday, July 16, 2013 12:36 PM >> To: Biswajit Panigrahi >> Cc: [email protected] >> Subject: Re: [users] Problem with Active standby >> >> Comments inline. >> >> On Tuesday 16 July 2013 12:30 PM, Biswajit Panigrahi wrote: >>> Hi , >>> >>> Currently I am using opensaf-4.2.0.I am facing with making >>> Active-standby setup. >>> >>> Currently I have installed opensaf as controller in two pcs. Both the >>> PCs are reachable but gateway IP for both are different. >> [Surya] If you are using the TCP mode of MDS transport, then you need to >> >> set the multicast address in dtmd.conf. >> If you are using TIPC as MDS transport, then both of them should be in >> >> the same subnet. >>> I have made the cluster of 2 controller and created the imm.xml with >> the >>> hostname for both provided in nodes.cfg. >>> >>> I have provided the same chassis_id and different slot_id to both the >>> controller. >>> >>> When I am trying to start opensaf in both the pcs ,both the opensaf >>> started separately in ACTIVE mode. >>> >>> Can any one help me out what could be the reason. >>> >>> >>> >>> Regards, >>> >>> Biswajit Panigrahi >>> >>> Department : Product Engg. >>> >>> 9/7 Hosur Road,bangalore-560029, INDIA >>> >>> ( Office: +918040243000|extn:3418 >>> >>> Mobile: + 91 9916674401 >>> >>> Email: [email protected] >> <mailto:[email protected]> >>> >>> >>> <http://www.techmahindra.com/> >>> Connect with us: >>> <http://www.facebook.com/TechMahindra> >>> <http://twitter.com/Tech_Mahindra> >>> <http://www.linkedin.com/company/tech-mahindra> >>> <http://www.youtube.com/user/techmahindra09> >>> >>> www.techmahindra.com <http://www.techmahindra.com/> >>> >>> >>> >>> >>> >>> >>> >> ======================================================================== >> ==================================================== >>> Disclaimer: This message and the information contained herein is >> proprietary and confidential and subject to the >>> Tech Mahindra policy statement, you may review the policy at <a >> href="http://www.techmahindra.com/Disclaimer.html";>http://www.techmahind >> ra.com/Disclaimer.html</a> >>> externally and <a >> href="http://tim.techmahindra.com/tim/disclaimer.html";>http://tim.techma >> hindra.com/tim/disclaimer.html</a> internally within Tech Mahindra. >> ======================================================================== >> ==================================================== >>> >>> >> ------------------------------------------------------------------------ >> ------ >>> See everything from the browser to the database with AppDynamics >>> Get end-to-end visibility with application monitoring from AppDynamics >>> Isolate bottlenecks and diagnose root cause in seconds. >>> Start your free trial of AppDynamics Pro today! >>> >> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clk >> trk >>> _______________________________________________ >>> Opensaf-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/opensaf-users >> ------------------------------------------------------------------------ >> ------ >> See everything from the browser to the database with AppDynamics >> Get end-to-end visibility with application monitoring from AppDynamics >> Isolate bottlenecks and diagnose root cause in seconds. >> Start your free trial of AppDynamics Pro today! >> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clk >> trk >> _______________________________________________ >> Opensaf-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/opensaf-users >> >> ============================================================================================================================ >> Disclaimer: This message and the information contained herein is >> proprietary and confidential and subject to the >> Tech Mahindra policy statement, you may review the policy at <a >> href="http://www.techmahindra.com/Disclaimer.html";>http://www.techmahindra.com/Disclaimer.html</a> >> externally and <a >> href="http://tim.techmahindra.com/tim/disclaimer.html";>http://tim.techmahindra.com/tim/disclaimer.html</a> >> internally within Tech Mahindra. >> ============================================================================================================================ > > ============================================================================================================================ > Disclaimer: This message and the information contained herein is proprietary > and confidential and subject to the > Tech Mahindra policy statement, you may review the policy at <a > href="http://www.techmahindra.com/Disclaimer.html";>http://www.techmahindra.com/Disclaimer.html</a> > externally and <a > href="http://tim.techmahindra.com/tim/disclaimer.html";>http://tim.techmahindra.com/tim/disclaimer.html</a> > internally within Tech Mahindra. > ============================================================================================================================ ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Opensaf-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/opensaf-users
