Kenneth Carrera wrote:
Hello all:
I am trying to configure my MAC to accept a PIV Card.
I have installed OpenSC (SCA for MAC) and can now read
my smart card ATR. My keychain can recognize when the
card is inserted.
However, I cannot seem to access the data or the
certificates on the card. I made sure to configure my
Opensc.config file to work with the new PIV card (
Oberthur ). Is there anything else I can do to try to
get the card to work with MAC? Thank you in advance
for any help offered!
How are you trying to access the data on the card?
I am assuming the card has at least a certificate and
key, either a test one from Oberthur, or issued by
whomever gave you the card.
You can start by using the /Library/OpenSC/opensc-tool
-l and -a options is a terminal window.
Then ./pkcs15-tool -c should show that you have a certificate.
(It may not really be there.)
./pkcs15-tool -r 1
should read the certificate and show it in PEM format.
If you bring up the Keychain utility and hit the "show Keychains"
button in the lower left, its should show all your keychains.
The PIV card would be listed as PIV_II, and the main window should
show you have an Auth key, and a certifcate. (You may have
other certs and keys as well There can be 4. In my tests I only
write out the auth cert to the card.
The one other issue is if the certificate is compressed.
Code has been sent to the devel list to handle this, but is
has not been added to the distribution. I don't have a card
with a compressed cert, so can not test it. If you suspect
that the cert is compressed, we can talk about that too.
Safari should be able to use this to some web site, if the
site trusts the CA that signed your certifcate.
Ken
____________________________________________________________________________________
Need a quick answer? Get one in minutes from people who know.
Ask your question on www.Answers.yahoo.com
_______________________________________________
opensc-devel mailing list
opensc-devel@lists.opensc-project.org
http://www.opensc-project.org/mailman/listinfo/opensc-devel
--
Douglas E. Engert <[EMAIL PROTECTED]>
Argonne National Laboratory
9700 South Cass Avenue
Argonne, Illinois 60439
(630) 252-5444
_______________________________________________
opensc-devel mailing list
opensc-devel@lists.opensc-project.org
http://www.opensc-project.org/mailman/listinfo/opensc-devel
