On 4/25/08, Chaskiel M Grundman <[EMAIL PROTECTED]> wrote: > On Fri, 25 Apr 2008, Alon Bar-Lev wrote: > > > > Thanks! > > I tried this... Does not seem to work. > > > > What's your device? What does ifdhandler log? > can you dump the usb descriptors and send them? >
Attached.
Look for @ALON.
1. plugin
2. pkcs15-tool --dump
I use:
Bus 002 Device 055: ID 0dc3:1004 Athena Smartcard Solutions, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0dc3 Athena Smartcard Solutions, Inc.
idProduct 0x1004
bcdDevice 5.05
iManufacturer 1 Athena
iProduct 2 ASEDrive CCID
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 6 ASE016
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4 ASEDrive CCID
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.10 (Warning: Only accurate for version 1.0)
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 4000
dwMaxiumumClock 4000
bNumClockSupported 0
dwDataRate 10752 bps
dwMaxDataRate 333333 bps
bNumDataRatesSupp. 0
dwMaxIFSD 252
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 00010330
Auto clock change
Auto baud rate change
CCID can set ICC in clock stop mode
NAD value other than 0x00 accpeted
TPDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 255
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
openct.log.gz
Description: GNU Zip compressed data
_______________________________________________ opensc-devel mailing list [email protected] http://www.opensc-project.org/mailman/listinfo/opensc-devel
