Viktor TARASOV a écrit :
> JP Szikora wrote:
>> Viktor TARASOV a écrit :
>>>
>>> I would try to prepare patch, but actually I have no CardOS card 
>>> recognized by OpenSC .
>>> The card CardOS that I have is:
>>> 3b:fb:18:00:02:c1:0a:31:fe:58:56:44:53:43:34:c8:08:00:00:00:01:4a
>>> Info : CardOS V4.3B (C) Siemens AG 1994-2004
>>> Chip type: 124
>>>
>>> Any help would be greatly appreciated.
>>>
>> Hi Viktor,
>>
>> You have a strange CardOS card ;-) The ATR is not the usual CardOS 
>> 4.3B (but that can be changed) and the chip type is usually 123. Can 
>> you send a complete output of the cardos-info command?
> Hi Jean-Pierre,
>
> here it is:
>
> 3b:fb:18:00:02:c1:0a:31:fe:58:56:44:53:43:34:c8:08:00:00:00:01:4a
> Info : CardOS V4.3B (C) Siemens AG 1994-2004
> Chip type: 124
> Serial number: 27 20 ab 15 2a 12
> Full prom dump:
> 33 66 00 1B 5B 5B 5B 5B 7C FF 27 20 AB 15 2A 12 3f..[[[[|.' ..*.
> 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
> OS Version: 200.8 (that's CardOS M4.3B)
> Current life cycle: 16 (operational)
> Security Status of current DF:
> Free memory : 818
> ATR Status: 0x128 unknown
> Packages installed:
> E1 09 01 04 13 02 C8 08 8F 01 01 ...........
> Ram size: 4, Eeprom size: 64, cpu type: 66, chip config: 63
> Free eeprom memory: 41116
> System keys: PackageLoadKey (version 0x00, retries 10)
> System keys: StartKey (version 0xff, retries 10)
> Path to current DF:
>
>
> This card has been formated with Vasco tools, it contains some PKCS#15 
> system.
> I know the values of PIN, SOPIN(PUK ?) but I could not verify any of 
> the PINs referenced in it's EF.AOD .
Hi Viktor,

You have a 64k Cardos 4.3B card. The StartKey is still the default one 
(0xFF), but probably the erase command is protected or blocked at the 
ACL level. Need a deeper analysis. I'm not sure you can do too much with 
OpenSC and this externally formatted card. With opensc-explorer, you can 
always try to look and to understand the structure of your card.

Maybe the best is to find an clean CardOS 4.3B to play with it.

Cheers,

Jean-Pierre


_______________________________________________
opensc-devel mailing list
opensc-devel@lists.opensc-project.org
http://www.opensc-project.org/mailman/listinfo/opensc-devel

Reply via email to