Not that I know much about XP 64, but is this specific to the 64-bit
version? Cause on regular XP, this is not a problem. (And indeed it
seems strange.)
Also, a fullscreen opengl-window is just a big window covering the
entire screen. It's quite different from DirectX's fullscreen mode, if
that's what you've read.
Does that make sense with what you've read, or am I talking nonsense? :)
Regards,
/Marcus
[EMAIL PROTECTED] wrote:
Hello,
I just found another problem on Windows XP 64. From what I found on the
Internet (and in practice) it seems to support the "fullscreen-mode"
only on the default screen.
Am I wrong? (I hope so).
So far it seems that I can only use one of the graphics boards, by
rendering stereo and switching the NVidia driver to clone mode ...... I
think I need to try out Linux!
Kind regards,
Bjoern
----- Ursprüngliche Nachricht -----
Von: Chuck Bueche
Datum: Donnerstag, April 27, 2006 7:21 pm
Betreff: RE: [Opensg-users] Cluster multicast (& Unicast)
An: [email protected]
> You're not alone regarding multiple video cards. That's another
> thing that I'm going to have to deal with. I just haven't gotten
> there yet.
>
> I've used the -v option for multiple viewports(2, that is) and
> it works fine, but I have a bad feeling I'm going to have problems
> when I try to move to a third viewport rendered on a second
> video card.
>
> Chuck
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of [EMAIL PROTECTED]
> Sent: Thursday, April 27, 2006 3:11 AM
> To: [email protected]
> Subject: RE: [Opensg-users] Cluster multicast (& Unicast)
>
> Hello all,
> I experienced the same problems with starting two multicast
> servers on one machine but it works fine with using
> Unicast/WinSock (-p option in the 12/13 tutorials). However,
> if I start only one server on the machine with Multicast and
> with Unicast (Using the clusterwindow with only on window) I
> find that the Unicast version is much slower ......
>
> Is there a workaround or is this a constraint I have to
> accept. The reason why I want to start two servers on one
> machine is, that I have two graphics boards (and four
> processor cores).... but OK. If its not possible I have to
> accept it.
> Kind regards
> Bjoern Zehner
>
> ----- Ursprüngliche Nachricht -----
> Von: Chuck Bueche
> Datum: Donnerstag, April 27, 2006 5:09 am
> Betreff: RE: [Opensg-users] Cluster multicast
> An: [email protected]
>
> > For the most part I'm only doing the single-system tests
> for
> > just that purpose - testing. I don't have a multiple-system
> > setup yet,
> > but I will eventually. I'm designing what's essentially a
> cave,
> > with a reasonable dataset, so I don't think I need the sort-last
> > windows. In fact it looks like sort-first is the way to go
> for
> > this application(?). In the end the client won't render
> > anything -
> > It'll do the physics and distribute the scene graph to the
> > various servers to render.
> >
> > My hope is to be able to develop using the appropriate
> number of
> > processes, without regards to which system they're actually
> running > on. Barring full screen operation this shouldn't be
> a problem.
> > Then when it's time to roll things onto multiple platforms,
> do that
> > then. I guess it's not too bad to test using unicast and
> then
> > enable multicast when I'm closer to the shipping configuration.
> >
> > Also, as I think through it, it doesn't seem too far-
> fetched to
> > imagine that multiple processes reading from the same
> broadcast port
> > may not even be supported at the OS level.
> >
> > Thanks,
> > Chuck
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf
> > Of Alex Allen
> > Sent: Wednesday, April 26, 2006 5:19 PM
> > To: [email protected]
> > Subject: Re: [Opensg-users] Cluster multicast
> >
> > Hi Chuck,
> > In my experience with multicast I have found it to be more
> of
> > a pain
> > than anything. I try and use StreamSock wherever possible.
> > With that
> > being said, clustering is not made to run all on one
> > machine. The whole
> > idea is to be dividing the work load between multiple
> > systems. Things
> > can certainly get messy when you are running a client and
> > two servers on
> > the same machine. If you want to see the true power of
> > clustering load a
> > large model and have several servers running on separate
> > machines. Also,
> > try using the -LS or -LB options, which will run the test
> > using sort
> > last windows and image compositing. When doing this, parts
> > of the model
> > are divided up between the servers, rendered, and then sent
> > back to the
> > client to be displayed as a whole. Once again though this
> > wont work very
> > well if clusters and servers are all on the same machine.
> >
> > Alex Allen
> >
> > Chuck Bueche wrote:
> > > Thanks Andreas,
> > >
> > > I initially tried using two different systems, one with
> > the client and one with two servers. When that didn't work
> > I went to a
> > > single system. I figured that any network access,
> > including multicast, would get looped back and be
> > transparent, even if on the
> > > same machine. I've had the same results regardless of the
> > configuration. :-(
> > >
> > > Chuck
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED] On
> > Behalf
> > > Of Andreas Zieringer
> > > Sent: Wednesday, April 26, 2006 12:49 PM
> > > To: [email protected]
> > > Subject: Re: [Opensg-users] Cluster multicast
> > >
> > > Hi Chuck,
> > >
> > > did you start the clients and servers on one machine?
> > This
> > > doesn't work
> > > with multicast also makes not much sense. To do
> > multicast you need
> > > several computers in a network.
> > >
> > > Andreas
> > >
> > > > Has anyone had recent experience using multicast with
> > a
> > > cluster? I'm slogging through the emails and seeing
> > lots of positive
> > > > comments about clustering performance, but I'm not
> > seeing
> > > it on my system.
> > > >
> > > > I'm running on Windows XP Pro with the latest OpenSG
> > > sources, built with Studio 2005 (argh!), and just trying
> > to
> > > run the cluster
> > > > test programs. Running 1 testClusterClient and 2
> > > testClusterServer's, things seem to work fine using the
> > > default connection
> > > > (StreamSock). When I enable multicast all around, I
> > can
> > > move the default torus for about 2 seconds before the
> > system
> > > locks up.
> > > >
> > > > In different DOS consoles, I'm executing:
> > > > testClusterClient -m -M -g640,240,320,600 Server1 Server2
> > > > testClusterServer -m -e -w -g640,480,0,0 Server1
> > > > testClusterServer -m -e -w -g640,480,640,0 Server2
> > > >
> > > > I've seen comments that once sync is lost with the
> > data
> > > stream, hope is lost for the cluster. Has this been
> > > addressed and I'm
> > > > missing it somehow?
> > > >
> > > > Dirk posted a link to some comments on the cluster
> > tests
> > > way back in 2002 on geocities, but it's now dead. If
> > > there's someone out
> > > > there who's knowledgeable about the project and would
> > like
> > > to work this through, I'm available to help. I'm not
> > familiar enough
> > > > with the innards of the system to do it on my own,
> > though
> > > (...yet ;-) ).
> > > >
> > > > Also, is there an explanation for
> > testClusterASyncServer somewhere?
> > > >
> > > > Thanks,
> > > > Chuck Bueche
> > > >
> > > >
> > > >
> > > > -------------------------------------------------------
> > > > Using Tomcat but need to do more? Need to support web
> > > services, security?
> > > > Get stuff done quickly with pre-integrated technology
> > to
> > > make your job easier
> > > > Download IBM WebSphere Application Server v.1.0.1
> > based on
> > > Apache Geronimo
> > > >
> > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057
> > > &dat=121642
> > > > _______________________________________________
> > > > Opensg-users mailing list
> > > > [email protected]
> > > > https://lists.sourceforge.net/lists/listinfo/opensg-users
> > > >
> > > >
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > Using Tomcat but need to do more? Need to support web
> > > services, security?
> > > Get stuff done quickly with pre-integrated technology to
> > > make your job easier
> > > Download IBM WebSphere Application Server v.1.0.1 based
> > on
> > > Apache Geronimo
> > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057
> > > &dat=121642
> > > _______________________________________________
> > > Opensg-users mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/opensg-users
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > Using Tomcat but need to do more? Need to support web
> > services, security?
> > > Get stuff done quickly with pre-integrated technology to
> > make your job easier
> > > Download IBM WebSphere Application Server v.1.0.1 based
> on
> > Apache Geronimo
> > >
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057
> > &dat=121642
> > > _______________________________________________
> > > Opensg-users mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/opensg-users
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > -------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web
> > services, security?
> > Get stuff done quickly with pre-integrated technology to
> > make your job easier
> > Download IBM WebSphere Application Server v.1.0.1 based on
> > Apache Geronimo
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057
> > &dat=121642
> > _______________________________________________
> > Opensg-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/opensg-users
> >
> >
> >
> > -------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web
> services,
> > security?Get stuff done quickly with pre-integrated
> technology
> > to make your job easier
> > Download IBM WebSphere Application Server v.1.0.1 based on
> > Apache Geronimo
> > http://sel.as-
> >
> us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642___
> ____________________________________________
> > Opensg-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/opensg-users
> >
>
>
> -------------------------------------------------------------
> ------------
> Dr. Bjoern Zehner
> UFZ Centre for Environmental Research Leipzig-Halle
> Permoserstrasse 15
> 04318 Leipzig
> Germany
> Tel: ++49 (341) 235 3979
> Fax: ++49 (341) 235 3939
>
>
>
>
> -------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
> security?Get stuff done quickly with pre-integrated technology
> to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on
> Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmdgk&kid0709&bid&3057&dat1642
> _______________________________________________
> Opensg-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/opensg-users
>
-------------------------------------------------------------------------
Dr. Bjoern Zehner
UFZ Centre for Environmental Research Leipzig-Halle
Permoserstrasse 15
04318 Leipzig
Germany
Tel: ++49 (341) 235 3979
Fax: ++49 (341) 235 3939
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642
_______________________________________________
Opensg-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/opensg-users
