Hello Gerrit,
Gerrit Voß wrote:
> On Tue, 2009-05-05 at 07:28 +0200, Christoph Schäfer wrote:
>> recently I ran into a problem after compiling OpenSG2 for the x64
>> plattform. I get a debug assertion in
>> OSGDrawable_d.dll!OSG::exactinit() line 730 when I try to run any
>> example drawing anything. The examples not drawing anything work fine...
>> Any ideas? I used x64 dependencies for the build, so this should not be
>> the problem.
>
> looks like we run into the following (from msdn):
>
> On the x64 architecture, changing the floating point precision is not
> supported. If the precision control mask is used on that platform, an
> assertion and the invalid parameter handler is invoked, as described in
> Parameter Validation.
>
> I'll see that I can make sure it is not used for x64.
I've tried this in r1884, but if you have a nicer solution I'm happy to
back it out again ?
Cheers,
Carsten
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Opensg-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/opensg-users
