If it doesn't work it's either because (1) the home region isn't set; or (2) the departing sim's http port is behind a firewall, therefore the receiving sim is not able to verify the session; or (3) the user information in the DB is wrong; or (4) miscellaneous configuration bugs.
Hence the reason for me to make the diva distro: 3 and 4 are eliminated. Paul Fishwick wrote: > On the work unix machine, there are no blocked ports. On the home pc > machine, the usual > incoming ports are open (9000 through 9010, 8000 through 8010) and both > work and home > opensims can be accessed via the SL viewer using the FQDN fine when not > using the > HG architecture (i.e., when using regular standalone). Is there a > particular port or port range > that HG uses, not used in standalone? Perhaps I have not opened up > everything I need to > for HG. > -p > > [email protected] wrote: >> Ports blocked on firewall. >> >> Paul Fishwick wrote: >>> [email protected] wrote: >>>> Paul Fishwick wrote: >>>> >>>>> It has public access ("Allow Public Access" is set in >>>>> Region/Estate). However, it also has the >>>>> defaultpermissionsmodule, so does one need to disable permissions >>>>> (username, password) to >>>>> get hypergrid TPs to work? >>>>> >>>> >>>> No. I though you were saying you have an access list in that sim. >>>> Permissions work exactly the same way in HG and non-HG. >>>> >>>> I don't know in which way you are failing to TP. It may be that you >>>> don't have your home region set. You cannot HG TP around without a >>>> home region. For setting a home region, you need to set it, logout, >>>> and then login again, or the viewer's cache will get in the way. >>>> >>> I went back temporarily to the regular standalone architecture for >>> the two opensim installations - we'll call them HOME and WORK. I >>> verified in each that >>> a home was set, since I could do "Teleport Home" in each, an it >>> worked fine. I also, >>> in each, set "accounts_authenticate = false" since this would appear >>> to be necessary for >>> HG? In any case, I can login as anyone and yet the permissions module >>> is enabled so only >>> the master user can edit/create on the land. So far, so good. >>> >>> Now, that I know that accounts_authenticate is turned off and that >>> each opensim >>> has a home region set, I turned back on the hypergrid setting under >>> [Architecture] for both >>> HOME and WORK. >>> >>> At HOME, I did link-region 1000 1000 <WORK IP> 9000 local >>> >>> this fails to get the map image, but correctly links in the WORK >>> opensim at 1000, 1000. >>> I can see the grey square at the 1000,1000 location in the map. >>> With the hypergrid, back on, I am unable to "Teleport Home" let alone >>> teleport to 'local' >>> by clicking on the grey square and trying to teleport there. When I >>> try "Teleport Home", it >>> is attempting to teleport to WORK's home since I can see this in >>> WORK's opensim log, when >>> it should be trying to teleport to HOME's home. >>> >>> In any event, I get [Hgrid]: Access denied to foreign user on the >>> WORK log screen. >>> >>> I realize I must be missing another essential step or setting. Thoughts? >>> >>> -p >>> >>> >>> >>> >>>> _______________________________________________ >>>> Opensim-users mailing list >>>> [email protected] >>>> https://lists.berlios.de/mailman/listinfo/opensim-users >>>> >>>> >>> >>> >> > > _______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
