> I had exactly the same experience: I bought two 500GB > PATA drives to attach to my SunBlade 150 (Sparc > [EMAIL PROTECTED]); at first I tried to connect them through > FireWire with a USB2/FW box, but whenever the drives > are accessed simultaneously, one of them locks up, > and the system responds with: > > Sep 2 17:09:57 sunshine scsi: [ID 193665 kern.info] sd2 at scsa13941: target > 0 lun 0 > Sep 2 17:09:57 sunshine genunix: [ID 936769 kern.info] sd2 is /[EMAIL > PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 > Sep 2 17:09:57 sunshine scsi: [ID 193665 kern.info] sd3 at scsa13942: target > 0 lun 0 > Sep 2 17:09:57 sunshine genunix: [ID 936769 kern.info] sd3 is /[EMAIL > PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 > Sep 2 17:12:59 sunshine scsi: [ID 107833 kern.warning] WARNING: /[EMAIL > PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 > (sd3): > ep 2 17:12:59 sunshine SCSI transport failed: > reason 'reset': retrying command > > When I connect just one, everything works fine, I can > see the drive through 'rmformat', and I can format > and use them as I do right now.
Which opensolaris release are you running? Maybe this is one of the following two firewire issues: http://www.opensolaris.org/jive/thread.jspa?messageID=41741 http://www.opensolaris.org/jive/thread.jspa?threadID=10796 This message posted from opensolaris.org _______________________________________________ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
