Hi shay, Suncluster is not opensourced, so you better ask your local support to forward this query to Suncluster group. I will try to answer as much I can. 1. Once you carve out luns out of your new storage and expose them to Suncluster nodes, either run "devfsadm" followed by "scdidadm -r" or reboot your nodes with "reboot -- -r" command. 2. You will need to update HAStoragePlus FilesystemMountpoint property if you are creating filesystem on these luns.
Regards, -Atul On 4/28/07, shay <[EMAIL PROTECTED]> wrote:
I have SunCluster3.1(update3) of 3 nodes (V240,V440,V440) connected to D1000 old scsi sun storage. we use SDS as volume manager. The suncluster is a GDS(propraity application that we monitoring from the cluster) I am going to replace the D1000 to SAN storage (HDS, AMS500). that meen that I am going to use Luns on my suncluster. As I see it, I just need to : 1. configure luns to the nodes in the cluster 2. configure new disk set on the luns from the SDS, 3. makeing the filesystem on them & copy the data from the D1000 to the new luns 4. Change the quorum from the D1000 disks to the file systems on the new luns. 5. maybe changing the HAStoragePluss resource. There is anything else that I miss here? thanks This message posted from opensolaris.org _______________________________________________ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
-- Atul Vidwansa Cluster File Systems Inc. http://www.clusterfs.com _______________________________________________ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
