Hello, I'm currently trying to grow my rpool mirror by replacing old drives with new drives. To my surprise when I connected both new drives and booted just one showed in cfgadm. I've tested to unconfigure/disconnect/connect/configure the not-shown drive but nothing happen. I've tested the same with shown drive but viola to my surprise it does not show again after configure! When I've had a look into messages I've seen those strange errors:
Sep 3 11:09:55 silence genunix: [ID 408114 kern.info] /p...@0,0/pci1043,2...@1f,2/d...@2,0 (sd9) offline Sep 3 11:09:58 silence genunix: [ID 408114 kern.info] /p...@0,0/pci1043,2...@1f,2/d...@3,0 (sd0) offline ^ this is me puting drives in unconfigured state Sep 3 11:10:10 silence scsi: [ID 583861 kern.info] sd0 at ahci0: target 3 lun 0 Sep 3 11:10:10 silence genunix: [ID 936769 kern.info] sd0 is /p...@0,0/pci1043,2...@1f,2/d...@3,0 Sep 3 11:10:10 silence genunix: [ID 408114 kern.info] /p...@0,0/pci1043,2...@1f,2/d...@3,0 (sd0) online Sep 3 11:10:10 silence pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) instance 1 irq 0xf vector 0x46 ioapic 0x4 intin 0xf is bound to cpu 1 Sep 3 11:10:10 silence devfsadmd[88]: [ID 937045 daemon.error] failed to lookup dev name for /p...@0,0/pci1043,2...@1f,2/d...@3,0 Sep 3 11:10:12 silence scsi: [ID 583861 kern.info] sd9 at ahci0: target 2 lun 0 Sep 3 11:10:12 silence genunix: [ID 936769 kern.info] sd9 is /p...@0,0/pci1043,2...@1f,2/d...@2,0 Sep 3 11:10:12 silence genunix: [ID 408114 kern.info] /p...@0,0/pci1043,2...@1f,2/d...@2,0 (sd9) online Sep 3 11:10:12 silence pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) instance 1 irq 0xf vector 0x46 ioapic 0x4 intin 0xf is bound to cpu 2 Sep 3 11:10:12 silence devfsadmd[88]: [ID 937045 daemon.error] failed to lookup dev name for /p...@0,0/pci1043,2...@1f,2/d...@2,0 ^ and here I try to configure both drives again. None has come so far, ie. I see just: ka...@silence:~$ cfgadm Ap_Id Type Receptacle Occupant Condition sata0/0::dsk/c1t0d0 disk connected configured ok sata0/1::dsk/c1t1d0 disk connected configured ok sata0/2 disk connected configured ok sata0/3 disk connected configured ok and the drives are connected to sata0/2 and sata0/3 Now my question is: how shall I convince devfsadm to find or even create appropriate device name for those drives? Thanks! Karel -- This message posted from opensolaris.org _______________________________________________ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
