Consider me an OpenSolaris novice. I've followed the instructions for building my own kernel and using the Install program, and it boots. However, I'm having trouble with the network interface and don't know where to look for the solution. This interface works fine with the pre-built snv_78 kernel.
I see the following messages on the console at boot time: WARNING: /dev/net: error 2 nge0: DL_ATTACH_REQ failed: DL_BADPPA nge0: DL_BIND_REQ failed: DL_OUTSTATE nge0: DL_PHYS_ADDR_REQ failed: DL_OUTSTATE nge0: DL_UNBIND_REQ failed: DL_OUTSTATE Below is more context from the log. Any hints or requests for more info appreciated! Thanks, K.C. Mar 4 11:27:02 roll dev: [ID 635921 kern.warning] WARNING: /dev/net: error 2 Mar 4 11:27:02 roll unix: [ID 190185 kern.info] SMBIOS v2.3 loaded (2042 bytes) Mar 4 11:27:02 roll genunix: [ID 408114 kern.info] /cpus (cpunex0) online Mar 4 11:27:02 roll pseudo: [ID 129642 kern.info] pseudo-device: dld0 Mar 4 11:27:02 roll genunix: [ID 936769 kern.info] dld0 is /pseudo/dld at 0 Mar 4 11:27:02 roll pcplusmp: [ID 803547 kern.info] pcplusmp: pciexclass,060400 (pcie_pci) instance 3 vector 0x18 ioapic 0xff intin 0xff is bound to cpu 0 Mar 4 11:27:02 roll npe: [ID 236367 kern.info] PCI Express-device: pci10de,5d at e, pcie_pci3 Mar 4 11:27:02 roll genunix: [ID 936769 kern.info] pcie_pci3 is /pci at 0,0/pci10de,5d at e Mar 4 11:27:03 roll pcplusmp: [ID 803547 kern.info] pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 0 Mar 4 11:27:03 roll pcplusmp: [ID 444295 kern.info] pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 0 Mar 4 11:27:03 roll i8042: [ID 526150 kern.info] 8042 device: keyboard at 0, kb8042 # 0 Mar 4 11:27:03 roll genunix: [ID 936769 kern.info] kb80420 is /isa/i8042 at 1,60/keyboard at 0 Mar 4 11:27:03 roll kb8042: [ID 390002 kern.info] kb8042 #0: version 1.68 (07/10/18) Mar 4 11:27:03 roll pcplusmp: [ID 803547 kern.info] pcplusmp: pciclass,0c0320 (ehci) instance 0 vector 0x15 ioapic 0x2 intin 0x15 is bound to cpu 0 Mar 4 11:27:05 roll npe: [ID 236367 kern.info] PCI Express-device: pci1043,815a at 2,1, ehci0 Mar 4 11:27:05 roll genunix: [ID 936769 kern.info] ehci0 is /pci at 0,0/pci1043,815a at 2,1 Mar 4 11:27:05 roll pcplusmp: [ID 803547 kern.info] pcplusmp: pciclass,0c0310 (ohci) instance 0 vector 0x16 ioapic 0x2 intin 0x16 is bound to cpu 0 Mar 4 11:27:05 roll npe: [ID 236367 kern.info] PCI Express-device: pci1043,815a at 2, ohci0 Mar 4 11:27:05 roll genunix: [ID 936769 kern.info] ohci0 is /pci at 0,0/pci1043,815a at 2 Mar 4 11:27:06 roll unix: [ID 950921 kern.info] cpu0: x86 (AuthenticAMD 20FF2 family 15 model 47 step 2 clock 2010 MHz) Mar 4 11:27:06 roll unix: [ID 950921 kern.info] cpu0: AMD Athlon(tm) 64 Processor 3200+ Mar 4 11:27:06 roll unix: [ID 212709 kern.info] workaround applied for cpu erratum #121 Mar 4 11:27:06 roll unix: [ID 469452 kern.info] NOTICE: cpqhpc: 64-bit driver module not found Mar 4 11:27:06 roll usba: [ID 912658 kern.info] USB 1.10 device (usb46d,c00c) operating at low speed (USB 1.x) on USB 1.10 root hub: mouse at 3, hid0 at bus address 2 Mar 4 11:27:06 roll usba: [ID 349649 kern.info] Logitech USB Mouse Mar 4 11:27:06 roll genunix: [ID 936769 kern.info] hid0 is /pci at 0,0/pci1043,815a at 2/mouse at 3 Mar 4 11:27:06 roll genunix: [ID 408114 kern.info] /pci at 0,0/pci1043,815a at 2/mouse at 3 (hid0) online Mar 4 11:27:06 roll pseudo: [ID 129642 kern.info] pseudo-device: tzmon0 Mar 4 11:27:06 roll genunix: [ID 936769 kern.info] tzmon0 is /pseudo/tzmon at 0 Mar 4 11:27:10 roll unix: [ID 469452 kern.info] NOTICE: cpqhpc: 64-bit driver module not found Mar 4 11:27:12 roll nge: [ID 801725 kern.info] NOTICE: nge0: Using FIXED interrupt type Mar 4 11:27:12 roll pcplusmp: [ID 803547 kern.info] pcplusmp: pci10de,57 (nge) instance 0 vector 0x17 ioapic 0x2 intin 0x17 is bound to cpu 0 Mar 4 11:27:12 roll mac: [ID 469746 kern.info] NOTICE: nge0 registered Mar 4 11:27:12 roll genunix: [ID 197085 kern.warning] WARNING: mod_installdrv: no major number for softmac Mar 4 11:27:12 roll last message repeated 3 times Mar 4 11:27:12 roll ip: [ID 618220 kern.error] nge0: DL_ATTACH_REQ failed: DL_BADPPA Mar 4 11:27:12 roll ip: [ID 719160 kern.error] nge0: DL_BIND_REQ failed: DL_OUTSTATE Mar 4 11:27:12 roll ip: [ID 320243 kern.error] nge0: DL_PHYS_ADDR_REQ failed: DL_OUTSTATE Mar 4 11:27:12 roll ip: [ID 954723 kern.error] nge0: DL_UNBIND_REQ failed: DL_OUTSTATE Mar 4 11:27:14 roll pseudo: [ID 129642 kern.info] pseudo-device: devinfo0 Mar 4 11:27:14 roll genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo at 0 Mar 4 11:27:15 roll svc.startd[100004]: [ID 652011 daemon.warning] svc:/network/physical:default: Method "/lib/svc/method/net-physical" failed with exit status 96. This message posted from opensolaris.org
