> Hi John, > > Looking over the several panics you've posted > recently there are a few bugs and cases raised for > people having similar issues on HP Proliant DL boxes > and OpenSolaris 2008.11, SXCE build 103+, and S10u6 > (but not earlier). Most site CR 6745357 which > suggests an issue with the AAC (Adaptec AdvancedRAID > Controller) firmware/Driver. Have a look at CR > 6745357 = > http://bugs.opensolaris.org/view_bug.do?bug_id=6745357 > > > We see from your panic that we're trying to load a > kernel module so a bit of kmdb might confirm which > module you're loading. In one of your posts you said > you weren't using the Adaptec but instead chose to > use an LSI controller. Solaris will still try to > load the AAC driver if we detect the presence of the > controller so is there a way to disable it?
Disabled the internal card - it made no difference. > > There are several issues which people run in to: > > * Buggy Adaptec Firmware (Most common cause) Running latest patch > * Data corruption caused by a bug in the aac driver - > fixed in version 2.2-16 (build 15817) of the aac > driver > * Try "::modinfo ! grep aac" if you manage to get > to kmdb kmdb loads but the command does not work kmdb: invalid command '::modinfo': unknown dcmd name > Disable DRAM scrubbing allows S10u6 to be installed > for some people. Got revision E opterons so should not be effected by this > > If you haven't already done so I'd recommend you try > to ensure the BIOS/Firmware, and all FCode is updated > on the system. You might need to use a slightly > older release of Solaris to do this. Every thing seems up to date. > > Hope this helps. -- This message posted from opensolaris.org
