hi
In order for solaris to detect 2 of my drives that are SATA
i had to turn raid off and set them to IDE.
i want to format them so that i am able to write to them
they are in NTFS right now and i am able to mount
and read from them but can not write to them.
i am not familar with UFS or ZFS or Pools but here is where i got stuck
code:
format
AVAILABLE DISK SELECTIONS:
0. c0d0 <drive type unknown>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
1. c1d0 <drive type unknown>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
2. c2d0 <DEFAULT cyl 3646 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
3. c2d1 <drive type unknown>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
Specify disk (enter its number):
i chose 0 since i do want to format 0 and 1
0
AVAILABLE DRIVE TYPES:
0. DEFAULT
1. other
Specify disk type (enter its number)
0
current
Current Disk = c0d0
<DEFAULT cyl 3646 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
code;
format
Cannot format this drive. Please use your Manufacturer supplied formatting
utility
code:
Any ideas anyone please
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
