Zhanks a lot for helps system5.
Please find below the output of the requested commands.
You are right. I'm Trying to connect my Opensolaris PC to a router, which has
an integrated DSL modem.
The DHCP functionality of the router is active. I have tried to establish the
internet connectivity through the nwam service and let Opensolaris do it for
me. But the DHCP request fails ( The icon on the top right side of the screen
prints DHCP request fails because the server did not answer within a time
frame.)
r...@opensolaris:~$ svcs nwam
STATE STIME FMRI
online 6:00:55 svc:/network/physical:nwam
r...@opensolaris:~$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
nge0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask ff000000
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
nge0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
inet6 fe80::3791:faff:fefc:1b00/10
r...@opensolaris:~$ netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ---------- ---------
127.0.0.1 127.0.0.1 UH 1 14 lo0
Routing Table: IPv6
Destination/Mask Gateway Flags Ref Use If
--------------------------- --------------------------- ----- --- ------- -----
fe80::/10 fe80::3791:faff:fefc:1b00 U 1 0 nge0
::1 ::1 UH 1 0 lo0
r...@opensolaris:~$ dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
nge0 Ethernet up 100 full nge0
r...@opensolaris:~$ pfexec dladm scan-wifi
r...@opensolaris:~$ dladm show-link
LINK CLASS MTU STATE OVER
nge0 phys 1500 up --
--
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
