I'm trying to create a mirror of my root drive, but I get this error when
trying to attach the 2nd drive: "cannot attach c8t1d0s0 to c8t0d0s0: no such
device in pool". Does anyone know where my mistake could be? I followed this
guide here: http://darkstar-solaris.blogspot.com/2008/09/zfs-root-mirror.html
ge...@zfs_fileserver:~$ pfexec format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c8t0d0 <DEFAULT cyl 36478 alt 2 hd 255 sec 63>
/p...@0,0/pci15d9,d...@1f,2/d...@0,0
1. c8t1d0 <ATA-ST3300631AS-3.04 cyl 36478 alt 2 hd 255 sec 63>
/p...@0,0/pci15d9,d...@1f,2/d...@1,0
2. c8t2d0 <ATA-ST3300631AS-3.04 cyl 36479 alt 2 hd 255 sec 63>
/p...@0,0/pci15d9,d...@1f,2/d...@2,0
3. c8t3d0 <ATA-ST3300831AS-3.03-279.46GB>
/p...@0,0/pci15d9,d...@1f,2/d...@3,0
4. c8t4d0 <ATA-ST3300831AS-3.03-279.46GB>
/p...@0,0/pci15d9,d...@1f,2/d...@4,0
5. c8t5d0 <ATA-ST3320620AS-C-298.09GB>
/p...@0,0/pci15d9,d...@1f,2/d...@5,0
6. c9d1 <drive type unknown>
/p...@0,0/pci8086,2...@1e/pci-...@3/i...@1/c...@1,0
Specify disk (enter its number): 1
selecting c8t1d0
[disk formatted]
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> fdisk
Total disk size is 36481 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 Active Solaris2 1 36480 36480 100SELECT
ONE OF THE FOLLOWING:
1. Create a partition
2. Specify the active partition
3. Delete a partition
4. Change between Solaris and Solaris2 Partition IDs
5. Edit/View extended partitions
6. Exit (update disk configuration and exit)
7. Cancel (exit without updating disk configuration)
Enter Selection: 3
Specify the partition number to delete (or enter 0 to exit): 1
Are you sure you want to delete partition 1? This will make all files and
programs in this partition inaccessible (type "y" or "n"). y
Partition 1 has been deleted. This was the active partition. Total
disk size is 36481 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===WARNING: no
partitions are defined!SELECT ONE OF THE FOLLOWING:
1. Create a partition
2. Specify the active partition
3. Delete a partition
4. Change between Solaris and Solaris2 Partition IDs
5. Edit/View extended partitions
6. Exit (update disk configuration and exit)
7. Cancel (exit without updating disk configuration)
Enter Selection: 1
Select the partition type to create:
1=SOLARIS2 2=UNIX 3=PCIXOS 4=Other
5=DOS12 6=DOS16 7=DOSEXT 8=DOSBIG
9=DOS16LBA A=x86 Boot B=Diagnostic C=FAT32
D=FAT32LBA E=DOSEXTLBA F=EFI 0=Exit? 1
Specify the percentage of disk to use for this partition
(or type "c" to specify the size in cylinders). 100
Should this become the active partition? If yes, it will be activated
each time the computer is reset or turned on.
Please type "y" or "n". y
Partition 1 is now the active partition. Total disk size is 36481
cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 Active Solaris2 1 36480 36480 100SELECT
ONE OF THE FOLLOWING:
1. Create a partition
2. Specify the active partition
3. Delete a partition
4. Change between Solaris and Solaris2 Partition IDs
5. Edit/View extended partitions
6. Exit (update disk configuration and exit)
7. Cancel (exit without updating disk configuration)
Enter Selection: 6
format> quit
ge...@zfs_fileserver:~$ pfexec prtvtoc /dev/rdsk/c8t0d0s2 | pfexec fmthard -s -
/dev/rdsk/c8t1d0s2
fmthard: New volume table of contents now in place.
ge...@zfs_fileserver:~$ pfexec zpool attach -f rpool c8t0d0s0 c8t1d0s0
cannot attach c8t1d0s0 to c8t0d0s0: no such device in pool
:(
--
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
