The branch master has been updated
via 2ff16afc17af7ee8dbff1fb34b71a51ecd55811e (commit)
from ef1e59ed833e8ed1d5f4de5b0c734da8561890e3 (commit)
- Log -----------------------------------------------------------------
commit 2ff16afc17af7ee8dbff1fb34b71a51ecd55811e
Author: XiaokangQian <xiaokang.q...@arm.com>
Date: Thu Nov 7 02:36:45 2019 +0000
Optimize AES-ECB mode in OpenSSL for both aarch64 and aarch32
Aes-ecb mode can be optimized by inverleaving cipher operation on
several blocks and loop unrolling. Interleaving needs one ideal
unrolling factor, here we adopt the same factor with aes-cbc,
which is described as below:
If blocks number > 5, select 5 blocks as one iteration,every
loop, decrease the blocks number by 5.
If 3 < left blocks < 5 select 3 blocks as one iteration, every
loop, decrease the block number by 3.
If left blocks < 3, treat them as tail blocks.
Detailed implementation will have a little adjustment for squeezing
code space.
With this way, for small size such as 16 bytes, the performance is
similar as before, but for big size such as 16k bytes, the performance
improves a lot, even reaches to 100%, for some arches such as A57,
the improvement even exceeds 100%. The following table will list the
encryption performance data on aarch64, take a72 and a57 as examples.
Performance value takes the unit of cycles per byte, takes the format
as comparision of values. List them as below:
A72:
Before optimization After optimization
Improve
evp-aes-128-ecb@16 17.26538237 16.82663866
2.61%
evp-aes-128-ecb@64 5.50528499 5.222637557
5.41%
evp-aes-128-ecb@256 2.632700213 1.908442892
37.95%
evp-aes-128-ecb@1024 1.876102047 1.078018868
74.03%
evp-aes-128-ecb@8192 1.6550392 0.853982929
93.80%
evp-aes-128-ecb@16384 1.636871283 0.847623957
93.11%
evp-aes-192-ecb@16 17.73104961 17.09692468
3.71%
evp-aes-192-ecb@64 5.78984398 5.418545192
6.85%
evp-aes-192-ecb@256 2.872005308 2.081815274
37.96%
evp-aes-192-ecb@1024 2.083226672 1.25095642
66.53%
evp-aes-192-ecb@8192 1.831992057 0.995916251
83.95%
evp-aes-192-ecb@16384 1.821590009 0.993820525
83.29%
evp-aes-256-ecb@16 18.0606306 17.96963317
0.51%
evp-aes-256-ecb@64 6.19651997 5.762465812
7.53%
evp-aes-256-ecb@256 3.176991394 2.24642538
41.42%
evp-aes-256-ecb@1024 2.385991919 1.396018192
70.91%
evp-aes-256-ecb@8192 2.147862636 1.142222597
88.04%
evp-aes-256-ecb@16384 2.131361787 1.135944617
87.63%
A57:
Before optimization After optimization
Improve
evp-aes-128-ecb@16 18.61045121 18.36456218
1.34%
evp-aes-128-ecb@64 6.438628994 5.467959461
17.75%
evp-aes-128-ecb@256 2.957452881 1.97238604
49.94%
evp-aes-128-ecb@1024 2.117096219 1.099665054
92.52%
evp-aes-128-ecb@8192 1.868385973 0.837440804
123.11%
evp-aes-128-ecb@16384 1.853078526 0.822420027
125.32%
evp-aes-192-ecb@16 19.07021756 18.50018552
3.08%
evp-aes-192-ecb@64 6.672351486 5.696088921
17.14%
evp-aes-192-ecb@256 3.260427769 2.131449916
52.97%
evp-aes-192-ecb@1024 2.410522832 1.250529718
92.76%
evp-aes-192-ecb@8192 2.17921605 0.973225504
123.92%
evp-aes-192-ecb@16384 2.162250997 0.95919871
125.42%
evp-aes-256-ecb@16 19.3008384 19.12743654
0.91%
evp-aes-256-ecb@64 6.992950658 5.92149541
18.09%
evp-aes-256-ecb@256 3.576361743 2.287619504
56.34%
evp-aes-256-ecb@1024 2.726671027 1.381267599
97.40%
evp-aes-256-ecb@8192 2.493583657 1.110959913
124.45%
evp-aes-256-ecb@16384 2.473916816 1.099967073
124.91%
Change-Id: Iccd23d972e0d52d22dc093f4c208f69c9d5a0ca7
Reviewed-by: Shane Lontis <shane.lon...@oracle.com>
Reviewed-by: Richard Levitte <levi...@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10518)
-----------------------------------------------------------------------
Summary of changes:
crypto/aes/asm/aesv8-armx.pl | 830 +++++++++++++++++++++
include/crypto/ciphermode_platform.h | 4 +
include/openssl/modes.h | 4 +
providers/implementations/ciphers/cipher_aes_hw.c | 9 +
.../implementations/ciphers/ciphercommon_hw.c | 9 +-
.../implementations/include/prov/ciphercommon.h | 1 +
6 files changed, 855 insertions(+), 2 deletions(-)
diff --git a/crypto/aes/asm/aesv8-armx.pl b/crypto/aes/asm/aesv8-armx.pl
index c132d1d7fe..d0ae34bc48 100755
--- a/crypto/aes/asm/aesv8-armx.pl
+++ b/crypto/aes/asm/aesv8-armx.pl
@@ -384,6 +384,836 @@ ___
&gen_block("en");
&gen_block("de");
}}}
+
+# Performance in cycles per byte.
+# Processed with AES-ECB different key size.
+# It shows the value before and after optimization as below:
+# (before/after):
+#
+# AES-128-ECB AES-192-ECB AES-256-ECB
+# Cortex-A57 1.85/0.82 2.16/0.96 2.47/1.10
+# Cortex-A72 1.64/0.85 1.82/0.99 2.13/1.14
+
+# Optimization is implemented by loop unrolling and interleaving.
+# Commonly, we choose the unrolling factor as 5, if the input
+# data size smaller than 5 blocks, but not smaller than 3 blocks,
+# choose 3 as the unrolling factor.
+# If the input data size dsize >= 5*16 bytes, then take 5 blocks
+# as one iteration, every loop the left size lsize -= 5*16.
+# If 5*16 > lsize >= 3*16 bytes, take 3 blocks as one iteration,
+# every loop lsize -=3*16.
+# If lsize < 3*16 bytes, treat them as the tail, interleave the
+# two blocks AES instructions.
+# There is one special case, if the original input data size dsize
+# = 16 bytes, we will treat it seperately to improve the
+# performance: one independent code block without LR, FP load and
+# store, just looks like what the original ECB implementation does.
+
+{{{
+my ($inp,$out,$len,$key)=map("x$_",(0..3));
+my ($enc,$rounds,$cnt,$key_,$step)=("w4","w5","w6","x7","x8");
+my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$tmp2,$rndlast)=map("q$_",(0..7));
+
+my ($dat,$tmp,$rndzero_n_last)=($dat0,$tmp0,$tmp1);
+
+### q7 last round key
+### q10-q15 q7 Last 7 round keys
+### q8-q9 preloaded round keys except last 7 keys for big size
+### q5, q6, q8-q9 preloaded round keys except last 7 keys for only 16 byte
+
+{
+my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9));
+
+my ($dat3,$in3,$tmp3); # used only in 64-bit mode
+my ($dat4,$in4,$tmp4);
+if ($flavour =~ /64/) {
+ ($dat2,$dat3,$dat4,$in2,$in3,$in4,$tmp3,$tmp4)=map("q$_",(16..23));
+}
+
+$code.=<<___;
+.globl ${prefix}_ecb_encrypt
+.type ${prefix}_ecb_encrypt,%function
+.align 5
+${prefix}_ecb_encrypt:
+___
+$code.=<<___ if ($flavour =~ /64/);
+ subs $len,$len,#16
+ // Original input data size bigger than 16, jump to big size processing.
+ b.ne .Lecb_big_size
+ vld1.8 {$dat0},[$inp]
+ cmp $enc,#0 // en- or decrypting?
+ ldr $rounds,[$key,#240]
+ vld1.32 {q5-q6},[$key],#32 // load key schedule...
+
+ b.eq .Lecb_small_dec
+ aese $dat0,q5
+ aesmc $dat0,$dat0
+ vld1.32 {q8-q9},[$key],#32 // load key schedule...
+ aese $dat0,q6
+ aesmc $dat0,$dat0
+ subs $rounds,$rounds,#10 // if rounds==10, jump
to aes-128-ecb processing
+ b.eq .Lecb_128_enc
+.Lecb_round_loop:
+ aese $dat0,q8
+ aesmc $dat0,$dat0
+ vld1.32 {q8},[$key],#16 // load key schedule...
+ aese $dat0,q9
+ aesmc $dat0,$dat0
+ vld1.32 {q9},[$key],#16 // load key schedule...
+ subs $rounds,$rounds,#2 // bias
+ b.gt .Lecb_round_loop
+.Lecb_128_enc:
+ vld1.32 {q10-q11},[$key],#32 // load key schedule...
+ aese $dat0,q8
+ aesmc $dat0,$dat0
+ aese $dat0,q9
+ aesmc $dat0,$dat0
+ vld1.32 {q12-q13},[$key],#32 // load key schedule...
+ aese $dat0,q10
+ aesmc $dat0,$dat0
+ aese $dat0,q11
+ aesmc $dat0,$dat0
+ vld1.32 {q14-q15},[$key],#32 // load key schedule...
+ aese $dat0,q12
+ aesmc $dat0,$dat0
+ aese $dat0,q13
+ aesmc $dat0,$dat0
+ vld1.32 {$rndlast},[$key]
+ aese $dat0,q14
+ aesmc $dat0,$dat0
+ aese $dat0,q15
+ veor $dat0,$dat0,$rndlast
+ vst1.8 {$dat0},[$out]
+ b .Lecb_Final_abort
+.Lecb_small_dec:
+ aesd $dat0,q5
+ aesimc $dat0,$dat0
+ vld1.32 {q8-q9},[$key],#32 // load key schedule...
+ aesd $dat0,q6
+ aesimc $dat0,$dat0
+ subs $rounds,$rounds,#10 // bias
+ b.eq .Lecb_128_dec
+.Lecb_dec_round_loop:
+ aesd $dat0,q8
+ aesimc $dat0,$dat0
+ vld1.32 {q8},[$key],#16 // load key schedule...
+ aesd $dat0,q9
+ aesimc $dat0,$dat0
+ vld1.32 {q9},[$key],#16 // load key schedule...
+ subs $rounds,$rounds,#2 // bias
+ b.gt .Lecb_dec_round_loop
+.Lecb_128_dec:
+ vld1.32 {q10-q11},[$key],#32 // load key schedule...
+ aesd $dat0,q8
+ aesimc $dat0,$dat0
+ aesd $dat0,q9
+ aesimc $dat0,$dat0
+ vld1.32 {q12-q13},[$key],#32 // load key schedule...
+ aesd $dat0,q10
+ aesimc $dat0,$dat0
+ aesd $dat0,q11
+ aesimc $dat0,$dat0
+ vld1.32 {q14-q15},[$key],#32 // load key schedule...
+ aesd $dat0,q12
+ aesimc $dat0,$dat0
+ aesd $dat0,q13
+ aesimc $dat0,$dat0
+ vld1.32 {$rndlast},[$key]
+ aesd $dat0,q14
+ aesimc $dat0,$dat0
+ aesd $dat0,q15
+ veor $dat0,$dat0,$rndlast
+ vst1.8 {$dat0},[$out]
+ b .Lecb_Final_abort
+.Lecb_big_size:
+___
+$code.=<<___ if ($flavour =~ /64/);
+ stp x29,x30,[sp,#-16]!
+ add x29,sp,#0
+___
+$code.=<<___ if ($flavour !~ /64/);
+ mov ip,sp
+ stmdb sp!,{r4-r8,lr}
+ vstmdb sp!,{d8-d15} @ ABI specification says so
+ ldmia ip,{r4-r5} @ load remaining args
+ subs $len,$len,#16
+___
+$code.=<<___;
+ mov $step,#16
+ b.lo .Lecb_done
+ cclr $step,eq
+
+ cmp $enc,#0 // en- or decrypting?
+ ldr $rounds,[$key,#240]
+ and $len,$len,#-16
+ vld1.8 {$dat},[$inp],$step
+
+ vld1.32 {q8-q9},[$key] // load key schedule...
+ sub $rounds,$rounds,#6
+ add $key_,$key,x5,lsl#4 // pointer to
last 7 round keys
+ sub $rounds,$rounds,#2
+ vld1.32 {q10-q11},[$key_],#32
+ vld1.32 {q12-q13},[$key_],#32
+ vld1.32 {q14-q15},[$key_],#32
+ vld1.32 {$rndlast},[$key_]
+
+ add $key_,$key,#32
+ mov $cnt,$rounds
+ b.eq .Lecb_dec
+
+ vld1.8 {$dat1},[$inp],#16
+ subs $len,$len,#32 // bias
+ add $cnt,$rounds,#2
+ vorr $in1,$dat1,$dat1
+ vorr $dat2,$dat1,$dat1
+ vorr $dat1,$dat,$dat
+ b.lo .Lecb_enc_tail
+
+ vorr $dat1,$in1,$in1
+ vld1.8 {$dat2},[$inp],#16
+___
+$code.=<<___ if ($flavour =~ /64/);
+ cmp $len,#32
+ b.lo .Loop3x_ecb_enc
+
+ vld1.8 {$dat3},[$inp],#16
+ vld1.8 {$dat4},[$inp],#16
+ sub $len,$len,#32 // bias
+ mov $cnt,$rounds
+
+.Loop5x_ecb_enc:
+ aese $dat0,q8
+ aesmc $dat0,$dat0
+ aese $dat1,q8
+ aesmc $dat1,$dat1
+ aese $dat2,q8
+ aesmc $dat2,$dat2
+ aese $dat3,q8
+ aesmc $dat3,$dat3
+ aese $dat4,q8
+ aesmc $dat4,$dat4
+ vld1.32 {q8},[$key_],#16
+ subs $cnt,$cnt,#2
+ aese $dat0,q9
+ aesmc $dat0,$dat0
+ aese $dat1,q9
+ aesmc $dat1,$dat1
+ aese $dat2,q9
+ aesmc $dat2,$dat2
+ aese $dat3,q9
+ aesmc $dat3,$dat3
+ aese $dat4,q9
+ aesmc $dat4,$dat4
+ vld1.32 {q9},[$key_],#16
+ b.gt .Loop5x_ecb_enc
+
+ aese $dat0,q8
+ aesmc $dat0,$dat0
+ aese $dat1,q8
+ aesmc $dat1,$dat1
+ aese $dat2,q8
+ aesmc $dat2,$dat2
+ aese $dat3,q8
+ aesmc $dat3,$dat3
+ aese $dat4,q8
+ aesmc $dat4,$dat4
+ cmp $len,#0x40 // because
.Lecb_enc_tail4x
+ sub $len,$len,#0x50
+
+ aese $dat0,q9
+ aesmc $dat0,$dat0
+ aese $dat1,q9
+ aesmc $dat1,$dat1
+ aese $dat2,q9
+ aesmc $dat2,$dat2
+ aese $dat3,q9
+ aesmc $dat3,$dat3
+ aese $dat4,q9
+ aesmc $dat4,$dat4
+ csel x6,xzr,$len,gt // borrow x6, $cnt, "gt" is not
typo
+ mov $key_,$key
+
+ aese $dat0,q10
+ aesmc $dat0,$dat0
+ aese $dat1,q10
+ aesmc $dat1,$dat1
+ aese $dat2,q10
+ aesmc $dat2,$dat2
+ aese $dat3,q10
+ aesmc $dat3,$dat3
+ aese $dat4,q10
+ aesmc $dat4,$dat4
+ add $inp,$inp,x6 // $inp is adjusted in
such way that
+ // at exit from the
loop $dat1-$dat4
+ // are loaded with last
"words"
+ add x6,$len,#0x60 // because .Lecb_enc_tail4x
+
+ aese $dat0,q11
+ aesmc $dat0,$dat0
+ aese $dat1,q11
+ aesmc $dat1,$dat1
+ aese $dat2,q11
+ aesmc $dat2,$dat2
+ aese $dat3,q11
+ aesmc $dat3,$dat3
+ aese $dat4,q11
+ aesmc $dat4,$dat4
+
+ aese $dat0,q12
+ aesmc $dat0,$dat0
+ aese $dat1,q12
+ aesmc $dat1,$dat1
+ aese $dat2,q12
+ aesmc $dat2,$dat2
+ aese $dat3,q12
+ aesmc $dat3,$dat3
+ aese $dat4,q12
+ aesmc $dat4,$dat4
+
+ aese $dat0,q13
+ aesmc $dat0,$dat0
+ aese $dat1,q13
+ aesmc $dat1,$dat1
+ aese $dat2,q13
+ aesmc $dat2,$dat2
+ aese $dat3,q13
+ aesmc $dat3,$dat3
+ aese $dat4,q13
+ aesmc $dat4,$dat4
+
+ aese $dat0,q14
+ aesmc $dat0,$dat0
+ aese $dat1,q14
+ aesmc $dat1,$dat1
+ aese $dat2,q14
+ aesmc $dat2,$dat2
+ aese $dat3,q14
+ aesmc $dat3,$dat3
+ aese $dat4,q14
+ aesmc $dat4,$dat4
+
+ aese $dat0,q15
+ vld1.8 {$in0},[$inp],#16
+ aese $dat1,q15
+ vld1.8 {$in1},[$inp],#16
+ aese $dat2,q15
+ vld1.8 {$in2},[$inp],#16
+ aese $dat3,q15
+ vld1.8 {$in3},[$inp],#16
+ aese $dat4,q15
+ vld1.8 {$in4},[$inp],#16
+ cbz x6,.Lecb_enc_tail4x
+ vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0]
+ veor $tmp0,$rndlast,$dat0
+ vorr $dat0,$in0,$in0
+ veor $tmp1,$rndlast,$dat1
+ vorr $dat1,$in1,$in1
+ veor $tmp2,$rndlast,$dat2
+ vorr $dat2,$in2,$in2
+ veor $tmp3,$rndlast,$dat3
+ vorr $dat3,$in3,$in3
+ veor $tmp4,$rndlast,$dat4
+ vst1.8 {$tmp0},[$out],#16
+ vorr $dat4,$in4,$in4
+ vst1.8 {$tmp1},[$out],#16
+ mov $cnt,$rounds
+ vst1.8 {$tmp2},[$out],#16
+ vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1]
+ vst1.8 {$tmp3},[$out],#16
+ vst1.8 {$tmp4},[$out],#16
+ b.hs .Loop5x_ecb_enc
+
+ add $len,$len,#0x50
+ cbz $len,.Lecb_done
+
+ add $cnt,$rounds,#2
+ subs $len,$len,#0x30
+ vorr $dat0,$in2,$in2
+ vorr $dat1,$in3,$in3
+ vorr $dat2,$in4,$in4
+ b.lo .Lecb_enc_tail
+
+ b .Loop3x_ecb_enc
+
+.align 4
+.Lecb_enc_tail4x:
+ veor $tmp1,$rndlast,$dat1
+ veor $tmp2,$rndlast,$dat2
+ veor $tmp3,$rndlast,$dat3
+ veor $tmp4,$rndlast,$dat4
+ vst1.8 {$tmp1},[$out],#16
+ vst1.8 {$tmp2},[$out],#16
+ vst1.8 {$tmp3},[$out],#16
+ vst1.8 {$tmp4},[$out],#16
+
+ b .Lecb_done
+.align 4
+___
+$code.=<<___;
+.Loop3x_ecb_enc:
+ aese $dat0,q8
+ aesmc $dat0,$dat0
+ aese $dat1,q8
+ aesmc $dat1,$dat1
+ aese $dat2,q8
+ aesmc $dat2,$dat2
+ vld1.32 {q8},[$key_],#16
+ subs $cnt,$cnt,#2
+ aese $dat0,q9
+ aesmc $dat0,$dat0
+ aese $dat1,q9
+ aesmc $dat1,$dat1
+ aese $dat2,q9
+ aesmc $dat2,$dat2
+ vld1.32 {q9},[$key_],#16
+ b.gt .Loop3x_ecb_enc
+
+ aese $dat0,q8
+ aesmc $dat0,$dat0
+ aese $dat1,q8
+ aesmc $dat1,$dat1
+ aese $dat2,q8
+ aesmc $dat2,$dat2
+ subs $len,$len,#0x30
+ mov.lo x6,$len // x6, $cnt, is zero at this
point
+ aese $dat0,q9
+ aesmc $dat0,$dat0
+ aese $dat1,q9
+ aesmc $dat1,$dat1
+ aese $dat2,q9
+ aesmc $dat2,$dat2
+ add $inp,$inp,x6 // $inp is adjusted in such way
that
+ // at exit from the loop
$dat1-$dat2
+ // are loaded with last "words"
+ mov $key_,$key
+ aese $dat0,q12
+ aesmc $dat0,$dat0
+ aese $dat1,q12
+ aesmc $dat1,$dat1
+ aese $dat2,q12
+ aesmc $dat2,$dat2
+ vld1.8 {$in0},[$inp],#16
+ aese $dat0,q13
+ aesmc $dat0,$dat0
+ aese $dat1,q13
+ aesmc $dat1,$dat1
+ aese $dat2,q13
+ aesmc $dat2,$dat2
+ vld1.8 {$in1},[$inp],#16
+ aese $dat0,q14
+ aesmc $dat0,$dat0
+ aese $dat1,q14
+ aesmc $dat1,$dat1
+ aese $dat2,q14
+ aesmc $dat2,$dat2
+ vld1.8 {$in2},[$inp],#16
+ aese $dat0,q15
+ aese $dat1,q15
+ aese $dat2,q15
+ vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0]
+ add $cnt,$rounds,#2
+ veor $tmp0,$rndlast,$dat0
+ veor $tmp1,$rndlast,$dat1
+ veor $dat2,$dat2,$rndlast
+ vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1]
+ vst1.8 {$tmp0},[$out],#16
+ vorr $dat0,$in0,$in0
+ vst1.8 {$tmp1},[$out],#16
+ vorr $dat1,$in1,$in1
+ vst1.8 {$dat2},[$out],#16
+ vorr $dat2,$in2,$in2
+ b.hs .Loop3x_ecb_enc
+
+ cmn $len,#0x30
+ b.eq .Lecb_done
+ nop
+
+.Lecb_enc_tail:
+ aese $dat1,q8
+ aesmc $dat1,$dat1
+ aese $dat2,q8
+ aesmc $dat2,$dat2
+ vld1.32 {q8},[$key_],#16
+ subs $cnt,$cnt,#2
+ aese $dat1,q9
+ aesmc $dat1,$dat1
+ aese $dat2,q9
+ aesmc $dat2,$dat2
+ vld1.32 {q9},[$key_],#16
+ b.gt .Lecb_enc_tail
+
+ aese $dat1,q8
+ aesmc $dat1,$dat1
+ aese $dat2,q8
+ aesmc $dat2,$dat2
+ aese $dat1,q9
+ aesmc $dat1,$dat1
+ aese $dat2,q9
+ aesmc $dat2,$dat2
+ aese $dat1,q12
+ aesmc $dat1,$dat1
+ aese $dat2,q12
+ aesmc $dat2,$dat2
+ cmn $len,#0x20
+ aese $dat1,q13
+ aesmc $dat1,$dat1
+ aese $dat2,q13
+ aesmc $dat2,$dat2
+ aese $dat1,q14
+ aesmc $dat1,$dat1
+ aese $dat2,q14
+ aesmc $dat2,$dat2
+ aese $dat1,q15
+ aese $dat2,q15
+ b.eq .Lecb_enc_one
+ veor $tmp1,$rndlast,$dat1
+ veor $tmp2,$rndlast,$dat2
+ vst1.8 {$tmp1},[$out],#16
+ vst1.8 {$tmp2},[$out],#16
+ b .Lecb_done
+
+.Lecb_enc_one:
+ veor $tmp1,$rndlast,$dat2
+ vst1.8 {$tmp1},[$out],#16
+ b .Lecb_done
+___
+
+$code.=<<___;
+.align 5
+.Lecb_dec:
+ vld1.8 {$dat1},[$inp],#16
+ subs $len,$len,#32 // bias
+ add $cnt,$rounds,#2
+ vorr $in1,$dat1,$dat1
+ vorr $dat2,$dat1,$dat1
+ vorr $dat1,$dat,$dat
+ b.lo .Lecb_dec_tail
+
+ vorr $dat1,$in1,$in1
+ vld1.8 {$dat2},[$inp],#16
+___
+$code.=<<___ if ($flavour =~ /64/);
+ cmp $len,#32
+ b.lo .Loop3x_ecb_dec
+
+ vld1.8 {$dat3},[$inp],#16
+ vld1.8 {$dat4},[$inp],#16
+ sub $len,$len,#32 // bias
+ mov $cnt,$rounds
+
+.Loop5x_ecb_dec:
+ aesd $dat0,q8
+ aesimc $dat0,$dat0
+ aesd $dat1,q8
+ aesimc $dat1,$dat1
+ aesd $dat2,q8
+ aesimc $dat2,$dat2
+ aesd $dat3,q8
+ aesimc $dat3,$dat3
+ aesd $dat4,q8
+ aesimc $dat4,$dat4
+ vld1.32 {q8},[$key_],#16
+ subs $cnt,$cnt,#2
+ aesd $dat0,q9
+ aesimc $dat0,$dat0
+ aesd $dat1,q9
+ aesimc $dat1,$dat1
+ aesd $dat2,q9
+ aesimc $dat2,$dat2
+ aesd $dat3,q9
+ aesimc $dat3,$dat3
+ aesd $dat4,q9
+ aesimc $dat4,$dat4
+ vld1.32 {q9},[$key_],#16
+ b.gt .Loop5x_ecb_dec
+
+ aesd $dat0,q8
+ aesimc $dat0,$dat0
+ aesd $dat1,q8
+ aesimc $dat1,$dat1
+ aesd $dat2,q8
+ aesimc $dat2,$dat2
+ aesd $dat3,q8
+ aesimc $dat3,$dat3
+ aesd $dat4,q8
+ aesimc $dat4,$dat4
+ cmp $len,#0x40 // because .Lecb_tail4x
+ sub $len,$len,#0x50
+
+ aesd $dat0,q9
+ aesimc $dat0,$dat0
+ aesd $dat1,q9
+ aesimc $dat1,$dat1
+ aesd $dat2,q9
+ aesimc $dat2,$dat2
+ aesd $dat3,q9
+ aesimc $dat3,$dat3
+ aesd $dat4,q9
+ aesimc $dat4,$dat4
+ csel x6,xzr,$len,gt // borrow x6, $cnt, "gt" is not typo
+ mov $key_,$key
+
+ aesd $dat0,q10
+ aesimc $dat0,$dat0
+ aesd $dat1,q10
+ aesimc $dat1,$dat1
+ aesd $dat2,q10
+ aesimc $dat2,$dat2
+ aesd $dat3,q10
+ aesimc $dat3,$dat3
+ aesd $dat4,q10
+ aesimc $dat4,$dat4
+ add $inp,$inp,x6 // $inp is adjusted in
such way that
+ // at exit from the
loop $dat1-$dat4
+ // are loaded with last
"words"
+ add x6,$len,#0x60 // because .Lecb_tail4x
+
+ aesd $dat0,q11
+ aesimc $dat0,$dat0
+ aesd $dat1,q11
+ aesimc $dat1,$dat1
+ aesd $dat2,q11
+ aesimc $dat2,$dat2
+ aesd $dat3,q11
+ aesimc $dat3,$dat3
+ aesd $dat4,q11
+ aesimc $dat4,$dat4
+
+ aesd $dat0,q12
+ aesimc $dat0,$dat0
+ aesd $dat1,q12
+ aesimc $dat1,$dat1
+ aesd $dat2,q12
+ aesimc $dat2,$dat2
+ aesd $dat3,q12
+ aesimc $dat3,$dat3
+ aesd $dat4,q12
+ aesimc $dat4,$dat4
+
+ aesd $dat0,q13
+ aesimc $dat0,$dat0
+ aesd $dat1,q13
+ aesimc $dat1,$dat1
+ aesd $dat2,q13
+ aesimc $dat2,$dat2
+ aesd $dat3,q13
+ aesimc $dat3,$dat3
+ aesd $dat4,q13
+ aesimc $dat4,$dat4
+
+ aesd $dat0,q14
+ aesimc $dat0,$dat0
+ aesd $dat1,q14
+ aesimc $dat1,$dat1
+ aesd $dat2,q14
+ aesimc $dat2,$dat2
+ aesd $dat3,q14
+ aesimc $dat3,$dat3
+ aesd $dat4,q14
+ aesimc $dat4,$dat4
+
+ aesd $dat0,q15
+ vld1.8 {$in0},[$inp],#16
+ aesd $dat1,q15
+ vld1.8 {$in1},[$inp],#16
+ aesd $dat2,q15
+ vld1.8 {$in2},[$inp],#16
+ aesd $dat3,q15
+ vld1.8 {$in3},[$inp],#16
+ aesd $dat4,q15
+ vld1.8 {$in4},[$inp],#16
+ cbz x6,.Lecb_tail4x
+ vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0]
+ veor $tmp0,$rndlast,$dat0
+ vorr $dat0,$in0,$in0
+ veor $tmp1,$rndlast,$dat1
+ vorr $dat1,$in1,$in1
+ veor $tmp2,$rndlast,$dat2
+ vorr $dat2,$in2,$in2
+ veor $tmp3,$rndlast,$dat3
+ vorr $dat3,$in3,$in3
+ veor $tmp4,$rndlast,$dat4
+ vst1.8 {$tmp0},[$out],#16
+ vorr $dat4,$in4,$in4
+ vst1.8 {$tmp1},[$out],#16
+ mov $cnt,$rounds
+ vst1.8 {$tmp2},[$out],#16
+ vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1]
+ vst1.8 {$tmp3},[$out],#16
+ vst1.8 {$tmp4},[$out],#16
+ b.hs .Loop5x_ecb_dec
+
+ add $len,$len,#0x50
+ cbz $len,.Lecb_done
+
+ add $cnt,$rounds,#2
+ subs $len,$len,#0x30
+ vorr $dat0,$in2,$in2
+ vorr $dat1,$in3,$in3
+ vorr $dat2,$in4,$in4
+ b.lo .Lecb_dec_tail
+
+ b .Loop3x_ecb_dec
+
+.align 4
+.Lecb_tail4x:
+ veor $tmp1,$rndlast,$dat1
+ veor $tmp2,$rndlast,$dat2
+ veor $tmp3,$rndlast,$dat3
+ veor $tmp4,$rndlast,$dat4
+ vst1.8 {$tmp1},[$out],#16
+ vst1.8 {$tmp2},[$out],#16
+ vst1.8 {$tmp3},[$out],#16
+ vst1.8 {$tmp4},[$out],#16
+
+ b .Lecb_done
+.align 4
+___
+$code.=<<___;
+.Loop3x_ecb_dec:
+ aesd $dat0,q8
+ aesimc $dat0,$dat0
+ aesd $dat1,q8
+ aesimc $dat1,$dat1
+ aesd $dat2,q8
+ aesimc $dat2,$dat2
+ vld1.32 {q8},[$key_],#16
+ subs $cnt,$cnt,#2
+ aesd $dat0,q9
+ aesimc $dat0,$dat0
+ aesd $dat1,q9
+ aesimc $dat1,$dat1
+ aesd $dat2,q9
+ aesimc $dat2,$dat2
+ vld1.32 {q9},[$key_],#16
+ b.gt .Loop3x_ecb_dec
+
+ aesd $dat0,q8
+ aesimc $dat0,$dat0
+ aesd $dat1,q8
+ aesimc $dat1,$dat1
+ aesd $dat2,q8
+ aesimc $dat2,$dat2
+ subs $len,$len,#0x30
+ mov.lo x6,$len // x6, $cnt, is zero at this
point
+ aesd $dat0,q9
+ aesimc $dat0,$dat0
+ aesd $dat1,q9
+ aesimc $dat1,$dat1
+ aesd $dat2,q9
+ aesimc $dat2,$dat2
+ add $inp,$inp,x6 // $inp is adjusted in such way
that
+ // at exit from the loop
$dat1-$dat2
+ // are loaded with last "words"
+ mov $key_,$key
+ aesd $dat0,q12
+ aesimc $dat0,$dat0
+ aesd $dat1,q12
+ aesimc $dat1,$dat1
+ aesd $dat2,q12
+ aesimc $dat2,$dat2
+ vld1.8 {$in0},[$inp],#16
+ aesd $dat0,q13
+ aesimc $dat0,$dat0
+ aesd $dat1,q13
+ aesimc $dat1,$dat1
+ aesd $dat2,q13
+ aesimc $dat2,$dat2
+ vld1.8 {$in1},[$inp],#16
+ aesd $dat0,q14
+ aesimc $dat0,$dat0
+ aesd $dat1,q14
+ aesimc $dat1,$dat1
+ aesd $dat2,q14
+ aesimc $dat2,$dat2
+ vld1.8 {$in2},[$inp],#16
+ aesd $dat0,q15
+ aesd $dat1,q15
+ aesd $dat2,q15
+ vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0]
+ add $cnt,$rounds,#2
+ veor $tmp0,$rndlast,$dat0
+ veor $tmp1,$rndlast,$dat1
+ veor $dat2,$dat2,$rndlast
+ vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1]
+ vst1.8 {$tmp0},[$out],#16
+ vorr $dat0,$in0,$in0
+ vst1.8 {$tmp1},[$out],#16
+ vorr $dat1,$in1,$in1
+ vst1.8 {$dat2},[$out],#16
+ vorr $dat2,$in2,$in2
+ b.hs .Loop3x_ecb_dec
+
+ cmn $len,#0x30
+ b.eq .Lecb_done
+ nop
+
+.Lecb_dec_tail:
+ aesd $dat1,q8
+ aesimc $dat1,$dat1
+ aesd $dat2,q8
+ aesimc $dat2,$dat2
+ vld1.32 {q8},[$key_],#16
+ subs $cnt,$cnt,#2
+ aesd $dat1,q9
+ aesimc $dat1,$dat1
+ aesd $dat2,q9
+ aesimc $dat2,$dat2
+ vld1.32 {q9},[$key_],#16
+ b.gt .Lecb_dec_tail
+
+ aesd $dat1,q8
+ aesimc $dat1,$dat1
+ aesd $dat2,q8
+ aesimc $dat2,$dat2
+ aesd $dat1,q9
+ aesimc $dat1,$dat1
+ aesd $dat2,q9
+ aesimc $dat2,$dat2
+ aesd $dat1,q12
+ aesimc $dat1,$dat1
+ aesd $dat2,q12
+ aesimc $dat2,$dat2
+ cmn $len,#0x20
+ aesd $dat1,q13
+ aesimc $dat1,$dat1
+ aesd $dat2,q13
+ aesimc $dat2,$dat2
+ aesd $dat1,q14
+ aesimc $dat1,$dat1
+ aesd $dat2,q14
+ aesimc $dat2,$dat2
+ aesd $dat1,q15
+ aesd $dat2,q15
+ b.eq .Lecb_dec_one
+ veor $tmp1,$rndlast,$dat1
+ veor $tmp2,$rndlast,$dat2
+ vst1.8 {$tmp1},[$out],#16
+ vst1.8 {$tmp2},[$out],#16
+ b .Lecb_done
+
+.Lecb_dec_one:
+ veor $tmp1,$rndlast,$dat2
+ vst1.8 {$tmp1},[$out],#16
+
+.Lecb_done:
+___
+}
+$code.=<<___ if ($flavour !~ /64/);
+ vldmia sp!,{d8-d15}
+ ldmia sp!,{r4-r8,pc}
+___
+$code.=<<___ if ($flavour =~ /64/);
+ ldr x29,[sp],#16
+___
+$code.=<<___ if ($flavour =~ /64/);
+.Lecb_Final_abort:
+ ret
+___
+$code.=<<___;
+.size ${prefix}_ecb_encrypt,.-${prefix}_ecb_encrypt
+___
+}}}
{{{
my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4)); my $enc="w5";
my ($rounds,$cnt,$key_,$step,$step1)=($enc,"w6","x7","x8","x12");
diff --git a/include/crypto/ciphermode_platform.h
b/include/crypto/ciphermode_platform.h
index b1868e1a6d..03afd719af 100644
--- a/include/crypto/ciphermode_platform.h
+++ b/include/crypto/ciphermode_platform.h
@@ -89,6 +89,7 @@ void AES_xts_decrypt(const unsigned char *inp, unsigned char
*out, size_t len,
# define HWAES_encrypt aes_v8_encrypt
# define HWAES_decrypt aes_v8_decrypt
# define HWAES_cbc_encrypt aes_v8_cbc_encrypt
+# define HWAES_ecb_encrypt aes_v8_ecb_encrypt
# define HWAES_ctr32_encrypt_blocks aes_v8_ctr32_encrypt_blocks
# endif
# endif
@@ -411,6 +412,9 @@ void HWAES_decrypt(const unsigned char *in, unsigned char
*out,
void HWAES_cbc_encrypt(const unsigned char *in, unsigned char *out,
size_t length, const AES_KEY *key,
unsigned char *ivec, const int enc);
+void HWAES_ecb_encrypt(const unsigned char *in, unsigned char *out,
+ size_t length, const AES_KEY *key,
+ const int enc);
void HWAES_ctr32_encrypt_blocks(const unsigned char *in, unsigned char *out,
size_t len, const AES_KEY *key,
const unsigned char ivec[16]);
diff --git a/include/openssl/modes.h b/include/openssl/modes.h
index 1c672d2a46..e19079912b 100644
--- a/include/openssl/modes.h
+++ b/include/openssl/modes.h
@@ -29,6 +29,10 @@ typedef void (*cbc128_f) (const unsigned char *in, unsigned
char *out,
size_t len, const void *key,
unsigned char ivec[16], int enc);
+typedef void (*ecb128_f) (const unsigned char *in, unsigned char *out,
+ size_t len, const void *key,
+ int enc);
+
typedef void (*ctr128_f) (const unsigned char *in, unsigned char *out,
size_t blocks, const void *key,
const unsigned char ivec[16]);
diff --git a/providers/implementations/ciphers/cipher_aes_hw.c
b/providers/implementations/ciphers/cipher_aes_hw.c
index bc733ee16a..e9a7c31f98 100644
--- a/providers/implementations/ciphers/cipher_aes_hw.c
+++ b/providers/implementations/ciphers/cipher_aes_hw.c
@@ -29,6 +29,10 @@ static int cipher_hw_aes_initkey(PROV_CIPHER_CTX *dat,
# ifdef HWAES_cbc_encrypt
if (dat->mode == EVP_CIPH_CBC_MODE)
dat->stream.cbc = (cbc128_f)HWAES_cbc_encrypt;
+# endif
+# ifdef HWAES_ecb_encrypt
+ if (dat->mode == EVP_CIPH_ECB_MODE)
+ dat->stream.ecb = (ecb128_f)HWAES_ecb_encrypt;
# endif
} else
#endif
@@ -64,6 +68,11 @@ static int cipher_hw_aes_initkey(PROV_CIPHER_CTX *dat,
dat->stream.cbc = (cbc128_f)HWAES_cbc_encrypt;
else
# endif
+# ifdef HWAES_ecb_encrypt
+ if (dat->mode == EVP_CIPH_ECB_MODE)
+ dat->stream.ecb = (ecb128_f)HWAES_ecb_encrypt;
+ else
+# endif
# ifdef HWAES_ctr32_encrypt_blocks
if (dat->mode == EVP_CIPH_CTR_MODE)
dat->stream.ctr = (ctr128_f)HWAES_ctr32_encrypt_blocks;
diff --git a/providers/implementations/ciphers/ciphercommon_hw.c
b/providers/implementations/ciphers/ciphercommon_hw.c
index f1c466edc8..31062f1bc6 100644
--- a/providers/implementations/ciphers/ciphercommon_hw.c
+++ b/providers/implementations/ciphers/ciphercommon_hw.c
@@ -34,8 +34,13 @@ int cipher_hw_generic_ecb(PROV_CIPHER_CTX *dat, unsigned
char *out,
if (len < bl)
return 1;
- for (i = 0, len -= bl; i <= len; i += bl)
- (*dat->block) (in + i, out + i, dat->ks);
+ if (dat->stream.ecb) {
+ (*dat->stream.ecb) (in, out, len, dat->ks, dat->enc);
+ }
+ else {
+ for (i = 0, len -= bl; i <= len; i += bl)
+ (*dat->block) (in + i, out + i, dat->ks);
+ }
return 1;
}
diff --git a/providers/implementations/include/prov/ciphercommon.h
b/providers/implementations/include/prov/ciphercommon.h
index 1072b577fe..bf77a4021e 100644
--- a/providers/implementations/include/prov/ciphercommon.h
+++ b/providers/implementations/include/prov/ciphercommon.h
@@ -37,6 +37,7 @@ struct prov_cipher_ctx_st {
union {
cbc128_f cbc;
ctr128_f ctr;
+ ecb128_f ecb;
} stream;
unsigned int mode;
